ReviewsCpvc Nipple Fittings For Plumbing

Gardner Gibson 7760-3-16 Dynamite Vinyl Over Vinyl Wallcovering Adhesive, 1 qt

  • Formulated for PVC and CPVC pipe and fittings.
  • Removes surface dirt, grease and grime for preparation before solvent cementing.
  • Less aggressive than clear and purple primer only products.
  • Purple tint ensures piping has been primed prior to solvent cement application.
  • For use in areas where plumbing code calls for verification that a primer has been used.
Check Stock

Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)

  • : This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
  • - : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
  • : The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
  • : With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
  • : TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..
Check Stock

SharkBite 25087 Faucet Installation Kit, Angle Stop, Plumbing Fitting Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: Shark Bite Faucet Installation Kit requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: Shark Bite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All Shark Bite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1/2 Inch x 3/4 Inch MHT Garden Valve Multi Turn Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 24622LF

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit....
  • COPPER, PEX, CPVC, PE-RT, HDPE: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any....
  • PERFORMANCE: Installing a hose bibb, adapter, connector, spigot, or shutoff, you can rely on a tight union as the pushfit connection bites into the....
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • SharkBite is the only push-to-connect brand than can ensure a clean, leak-free....
  • MADE IN THE USA: All SharkBite connectors, faucets, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch Check Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U2020-0000LFA

  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free.
  • HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

The Frost Pipe.The Pipe You Make from ICE!

  • INSTALLS IN SECONDS: 1/2 inch push-fit inlet x 3/4 inch MHT outlet Sillcock Valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 PSI and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • VERSATILTY: SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination.
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 25558LFA Dual Compression Outlet Angle Stop Valve, 1/2 inch x 3/8 inch x 3/8 inch Plumbing Fitting, Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: Dual outlet compression SharkBite valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

(Pack of 2) EFIELD Push Fit 1/4 Turn Straight Stop Valve Water Shut Off 1/2 Push x 3/8 Inch Compression Chrome with a Disconnect Clip

  • Directly Supplied by One of the Biggest Plumbing systems Manufacturers.
  • Lead Free DZR Forged Brass Fittings Size 1/2 Inch push x 3/8 Inch Comp and 1/4 Turn on/off with a Disconnect Clip.
  • 200 PSI and 200 Degrees F. Use in Potable water and Hydronic Heating Applications..
  • No Tools, No Soldering, No Crimping or Glue. Push to Connect..
Check Stock