ReviewsCr Rubber Ball

VORTEK DropShot EDC Folding Pocket Knife: Ball Bearing Pivot, 8Cr13MoV Blade, Deep Carry Pocket Clip, Smooth Fast Everyday

Ball Bearing Pivot: With it's stainless steel ball bearing pivot system this knife manually opens and closes extremely smooth.
8Cr13MoV Stainless Steel Blade: 8Cr13MoV stainless steel is an excellent choice for an everyday carrying pocket knife. It holds a sharp edge really well and is easy to maintain and keep sharp.
Tough G10 Handles: G10 Handles are one of the best handle materials you can use on a knife. G10 handles provide superior grip in wet or dry conditions.
Sturdy Liner Lock: Using a liner lock allows the blade to lock open securely for safe use each and every time. This knife also includes a stainless steel pocket clip for everyday carry.
SPECS: 3.50" Blade - 8.50" Overall - 5" Closed - 4.37 Ounces.

Check Stock

12 Pcs LM8UU Linear Ball Bearings, 8mm Bore Dia, 15mm OD, 24mm Length with Double Side Rubber Seal Great for CNC,3D Printer

[SIZE] - Model: LM10UU, 10x19x29mm Metric Double Seal Linear Bearing.
[USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
[FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
[CAPABILITY] - Static Load Capacity (Cor): 373N, Dynamic Load Capacity (Cr): 549N (Recommended load is 80% of rated load, not to exceed rated load.).
[APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..

Check Stock

Green LED Light Maleficent Staff Magical Scepter Wand Wizard

FEATURES: Luxury Wizard Staff have 2 modes Led Light(Flashing or Still light ). The top is a 2 inch diameter crystal ball..
Product information: Made of quality PVC.51 inch Length,1.8 lb.This Maleficent Staff will be a gift for your Halloween.
Component: Magical Scepter made of three-section assembled round tube. You can adjust its lenght..
Batteries: 2Pcs CR2032 batteries(included in the Scepter ). If the batteries dead, you can replace with 2pcs CR2032 batteies to use it again..

Check Stock

Proforged 104-10529 Tall Outer Tie Rod End

...d to reduce bump steer on lowered vehicles - dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
1,000,000 MILE WARRANTY. You can install our tall tie rod ends with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
WHAT IS A TIE ROD END? A tie rod end (also known as a tie rod) is part of your vehicle’s steering system - it ties various steering components together to allow your wheels to....

Check Stock

Traxxas 5185 Rubber Tires for Wheelie Bar Wheels (pair)

Machined Aluminum Ball Bearing Wheels with Rubber Tires.
Precision 6061-T6 aluminum wheels feature a stunning anodized finish and ride on rubber-sealed 5x8mm ball bearings.
Soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies.
Includes 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2).

Check Stock

Tanstic 9Pcs Thrust Ball Bearings 10MM 17MM 20MM Bore 24MM 30MM 35MM OD 9MM 10MM Thick, Chrome Steel Single Row Roller Thrust Precision Axial Ball Bearings for Oven Turntable Jack Pump Rotating

✅ [MATERIAL]: Made of Chrome Steel(AISI 52100), which features with wear-resistant, high temperature resistance and high hardness. Resistance to deformation under load, durable for use..
✅ [3 Different Size]: We have 3 size: 10mm bore diameter, 24mm outer diameter, 9mm thickness.
17mm bore diameter, 30mm outer diameter, 9mm thickness.
20mm bore diameter, 35mm outer diameter, 10mm thickness..
✅ [CAPABILITY]: 20x35x10mm: Dynamic Load Rating (Cr): 14.2kN.
17x30x9mm: Dynamic Load Rating (Cr): 10.8kN.
10x24x9mm: Dynamic Load Rating (Cr): 10kN.
✅ [FEATURES]: The separable components of thrust ball bearings are interchangeable, which is convenient for Installation and disassembly, maintenance and inspection. High performance, low noise and long service life..
✅ [APPLICABLE]: Thrust ball bearings are widely used in automotive industry, machine tool, rotating, pump, jack, also suitable for daily use such as oven turntable..

Check Stock

TLAPS 7422440542538 For 2002-2006 Honda CR-V Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

Application: For 2002-2006 Honda CR-V All Models.
Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 3500 lbs, Tongue Weight - 350 lbs, Weight Distribution - N/A, Weight Distribution Tongue Weight - N/A.
Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.

Check Stock

LM12UU Bearing, 10 Pcs 12mm Linear Motion Ball Bearings Bushing Slide Bearing Rods for 3D Printer Cylinder CNC Parts, Pack of 10, 12 x 20 x 30mm

[SIZE] - Model: SCV16UU, 50 x 24 x 38.5mm Metric Double Seal Linear Bearing, 16mm Nominal Shaft Diameter.
[USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
[FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
Aluminium alloy housing to provide high strength and stiffness..
[CAPABILITY] - Static Load Capacity (Cor): 1180N, Dynamic Load Capacity (Cr): 774N (Recommended load is 80% of rated load, not to exceed rated load.).
[APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..

Check Stock

Cadence Stout Spinning Reel and CR7 Spinning Rod

...V-5H rotor doesn’t flex even in tough conditions. The entire reel is coated with our saltwater treatment to prevent corrosion and ensure reel longevity. A strong aluminum braid-ready spool allows you to tie braid directly to the spool without backing..
Smooth Performance: The Stout spinning reel has a 7 + 1 sealed ball bearing system that is anti-corrosive and delivers maximum smoothness during retrieval..
Powerful: The carbon fiber drag system delivers a consistent and powerful drag and has a max drag of 41 pounds. A 6.2:1 gear ratio gives you cranking power but also allows you to keep up with fast running fish. The stainless-steel main shaft provides an enduring performance that you can rely on and is also corrosion resistant..
Premium Materials: The CR7 series of rods are made from materials that bring strength and sensitivity without weight. Made of 40 ton carbon, SiC guides with durable stainless steel frames, a comfortable Fuji reel seat and a blank wrapped in carbon veil to enhance the durability. The CR7 series of rods comes in 2 handle configurations.
carbon split grip and full grip using a premium cork and EVA. The CR7 series from Cadence is made to deliver a premium rod at a greater value than the competition..

Check Stock

VORTEK Everyday Carry EDC Folding Pocket Knife - Smooth Ball Bearing Pivot System - 8Cr13MoV Stainless Steel Razor Sharp Blade - G10 Handles Provide Superior Grip

Ball Bearing Pivot System: With it's stainless steel ball bearing pivot system, this knife opens and closes extremely smooth.
8Cr13MoV Stainless Steel Blade: 8Cr13MoV stainless steel is an excellent choice for an everyday carrying pocket knife. It holds a sharp edge really well and is very easy to maintain and keep sharp.
Sturdy Liner Lock: Using a liner lock allows the blade to lock open securely for safe use each and every time. This knife also includes a stainless steel pocket clip for everyday carry.
Tough G10 Handles: G10 Handles are one of the best handle materials you can use on a knife. G10 handles provide superior grip in wet or dry conditions.
SPECS: 3.5" Blade - 8.25" Overall - 4.75" Closed - 4.06 Ounces.

Check Stock

Nevperish K9 Training Ball with Rope Exercise and Reward Toy for Dogs Indestructible Dog Toy Ball with Handle for Training Pull Throw Toy tug Toy Dogs Fetch Toys Belgian Malinois Gifts (Orange)

[SAFE RUBBER MATERIAL]: The dog K9 training ball is made of natural rubber, which is solid and durable..
[ROPE BALL SIZE]: The indestructible dog toy ball's diameter is 2.4inch / 6cm, and the length of rope is 11.8inch / 30cm. Our rubber ball on a rope can be filled with dog treats or food, suitable for most breeds of dogs playing, training and chewing..
[BRIGHT & VIBRANT COLOR]: The rope ball can easily arouse your pets' interest, you can play the dog toy ball with your dog, improving relationship between you and dogs..
[SOLID RUBBER BALL AND DURABLE NYLON ROPE]: Heavy duty rubber ball with hollow inside, easy to throw further with durable cotton rope. It is resistant to tear and scratch, and strong non-slip loop makes it easy to throw..
[MORE PHYSICAL HEALTH]：Playing exercise training ball develops your dog's body and coordination, increasing intelligence and creates happy spirit, and it is also a good way to clean their teeth and exercise their muscles..

Check Stock