ReviewsCraft Wood Engraver

USB Cordless Electric Engraving Pen Kit, Mini 3-Speed Rotary Etching Machine Engraving Jewelry Leather Wood Glass,42pcs Engraver Tools for Metal with 30 Bits&Stencil

Portable USB Engraver:These engraving tool powered by USB interface. Cordless using will be up to 60 minutes idling after full charge. Easy to help you finish better engraved craft and outdoor working..
3-Speed&High Quality:3 position adjust rotation speed from 5000-25000 r/min to apply different requirements. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving.Metal engraver pen equips with excellent motor,heat dissipation design,qualify circuit chip to allow long time using..
Various Bits for Beginner:these engraving rotary tools kit include 30 grinding bits, 2 drill bits, 3 saw blades,1 tungsten steel bit,4 words stencil. The tungsten steel bit own 91HRA hardness,which special sharp on metal and glass.all these are easy for beginner to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
Start Engraving Now:Our metal engraving machine fit for almost all material surface as long as you choose right bits,on metal, glass, ceramic, leather, wood,jewelry,stone ,jade or statue.they are convenience to take anywhere and....

Check Stock

Dremel 4300-5/40 High Performance Rotary Tool Kit & 225-01- Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable - Engraver, Polisher, and Mini Sander

1 of Dremel 4300-5/40 High Performance Rotary Tool Kit with LED Light- 5 Attachments & 40 Accessories- Engraver, Sander, and Polisher- Perfect for Grinding, Cutting, Wood Carving, Sanding, and Engraving.
1 of Dremel 225-01- Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable - Engraver, Polisher, and Mini Sander- Ideal for Detail Metal Engraving, Wood Carving, and Jewelry Polishing.

Check Stock

Electric Micro Engraving Pen Carve Engraving Tool Kit Cordless Engraver Pen Etching Pen Easy Etcher for DIY Jewelry Making, Metal, Glass, Wood, Leather with Replaceable Diamond Tip Bit

【NO Electricity Needed DIY Carve Tools】- This engraving pen micro pens only powered by 2 AAA batteries (not included). Free from sockets and wires, you can engrave anywhere and anytime..
【Mini Engraving Pen Kit 】- This tool engraver electric engraver pen cordless engraving pen compact size makes it easy to carry. It’s super light and effortless to work. Won’t feel tired even if you use the metal engraver for a long time..
【Handheld Carving Pen, Easy to Use】- This etching tool using a standard 3/32-inch engraving diamond tip bit and safe fingertip controlled on/off switch, safe and easy enough..
【Graver Kit with Extra Diamond Tip Bits Replacement】- You will receive extra 5pcs engraving tip, micro graveur engraving tool kit jewellery making kit cautery pen can be replaced directly with a blunt or broken one, rather than being purchased separately..
【Wide Application of Etching Kit】- Engraving pen for metal, leather engraving kit,electric leather engraving pen, wood engraving, electrical machinery has a 21,000 RPM Motor to be engraved wide variety of materials, like metal, stone, plastic, glass, ceramic, wood, leather and more..

Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....

Check Stock

Hand Engraver Tool for Metal,HARDELL 13W Engraver with Stencils,120V Handheld Etching Tool for DIY, 5 Speed Engraving Tool with 7200 Strokes/Min,3 Carbide Points Included

1.【SOFT RUBBER HANDLE】: HARDEll engraver handle has a soft rubber coating, the handle is ergonomically designed to perfectly fit the curvature of the hand grip, which can effectively reduce wrist fatigue and soreness after long hours of engraving work, giving you a comfortable and precise operating experience..
2.【5-SPEED ADJUSTABLE ENGRAVING TOOL】: 5-Speed engraving pen can provide a variety of engraving depths and speeds according to your engraving needs. Handheld engraving machine is equipped with 3 replaceable tungsten carbide writing heads, allowing you to obtain detailed and satisfactory engraving results on a wide range of engraving materials. such as tile, metal (not applicable to hardened steel), stone, wood, leather, glass, PVC pipe, DIY crafts..
3.【SMALL BODY, BIG POWER】: With a lightweight 12oz design, the 7200Strokes/Min 13W handheld engraver can fully meet the daily engraving needs of crafters. The comfortable pen design gives you more freedom in operation and is easy to carry, which can perfectly fit your private custom engraving needs..
4.【VIBRATION TYPE ENGRAVING PEN】: Mental engraver using pure copper coil movement to provide surging power and longer life. Vibration engraving work principle, making the carving lines mor....

Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

- ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
& - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
- - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....

Check Stock

NEJE 3 N30820 Laser Engraver, 5.5-7.5w Output Power DIY Laser Engraver and Cutter Machine Support LightBurn, 0.08mm Ultra-Fine Focus, for Acrylic Wood and Glass ,170 x 170 mm(6.7'x6.7')

...ith square focus, the minimum focus point can reach 0.08×0.08mm. The module is good at engraving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc… The module has a built-in intelligent driver, which can dynamically adjust the fan for quieter use.
【Appropriate Engraver Area】170 x 170 mm engraving area, the desktop professional engraver machine is tiny, beautiful and lightweight, portable and does not take up space, and is fully functional.It is the most cost-effective machine. The whole machine test only needs 4 screws to complete the installation. Suitable for beginners/entrepreneurs/engraver hobbyists/designers/housewives.
【Applicable Engraver Materials】NEJE 3 portable engraving machine supports engraving wood, MDF, leather, paper, cotton and other materials.Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.The machine is compatible with mature engraving software on the market (LaserGRBL, Lightburn) and beginner-friendly software (NEJE 3).
【Security Protect】Safety is always the top priority.NEJE 3 cutting and engraving machine has built-in MEMS gyroscope sensor to record the state of the machine.When the device moves, the machine will automatically stop w....

Check Stock

Electric Engraving Pen with 36 Bits, USB Rechargeable Cordless Engraving Machine, Portable DIY Rotary Engraver for Jewelry Wood Glass Stone Carving

...low when working, no need to worry about it will affect the family's rest. It will be great for beginners and professionals to use at anytime, anywhere to make unique creations, it will be the good gift for anyone who is interested in engraving or drilling on materials or DIYS..
Wide Applications: This electric engraver tool supports you to beautify and engrave in any material supplier, such as glass, wood, eggs, plastic, jewelry, ceramics, leather, metal and etc. You can use this tool for engraving, grinding, polishing, drilling, and cutting on metal, glass, jewelry and other materials. Endless applications included engraving tools, drilling goods, toys, telephone chargers and delicate jewelry, watches and glassware..
Easy to Use: One button to turn on or turn off the engraving pen, also this bottom work for flexibly adjust the speed according to the needs of carving. There are 3 gears with speeds for your choices and our cordless engraving pen is equipped with a built-in overload protection chip. When the load resistance is too high, it will automatically power off to protect it, and prolong the service life of the jewelry engraving machine..
Portable and Flexible: The body of our etcher engraver tool is small and weighs only 0.088 pounds, you ca....

Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....

Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
【Wide Compatibility and Multiple Connection W....

Check Stock

Upgrade Electric Engraving Pen with 35 Bits, USB Rechargeable Cordless Engraving Machine, Portable DIY Rotary Engraver for Jewelry Wood Glass Stone Carving (Grey)

...affect the family's rest. It will be great for beginners and professionals to use at anytime, anywhere to make unique creations, it will be the good gift for anyone who is interested in engraving or drilling on materials or DIYS..
Wide Applications: This electric engraver tool supports you to beautify and engrave in any material supplier, such as glass, wood, eggs, plastic, jewelry, ceramics, leather, metal and etc. You can use this tool for engraving, grinding, polishing, drilling, and cutting on metal, glass, jewelry and other materials. Endless applications included engraving tools, drilling goods, toys, telephone chargers and delicate jewelry, watches and glassware..
Easy to Use: One button to turn on or turn off the engraving pen, also this bottom work for flexibly adjust the speed according to the needs of carving. There are 3 gears with speeds for your choices and our cordless engraving pen is equipped with a built-in overload protection chip. When the load resistance is too high, it will automatically power off to protect it, and prolong the service life of the jewelry engraving machine..

Check Stock