ReviewsCraftsman Snowblower 179cc 21s

Tecumseh 640086 Carburetor fits 3HP 3.5HP 2 cycle Snow Blower Engines

  • Fit Tecumseh 632552 632557A 632557 632560A 632560 632641 640086A 640086 640092A 640092 640311 640098A 640090 640341 HSK600 HSK635 TH098SA 632390....
  • Craftsman 536884220 20" & 536884320 20" Snowblower.
  • Fit Tecumseh Powerlite CCR 3HP 2-Cycle 640086A HSK600 HSK635 Engine.
  • Toro CCR powerlite CCR1000 CCR2400 HSK600 HSK635 TH098SA Engine.
  • Fit Craftsman Toro Sears Tecumseh Yardmachine MTD snowblower engines..
  • Package includes: 1pc Carburetor, 1pc Mounting Gasket, 1pc Fuel Filter, 1pc Fuel Line, 1pc Primer Bulb and 1pc Spark Plug as pictured.
Check Stock

Craftsman 179cc Electric Start Single Stage Gas Powered Snow Blower with 21-Inch Clearing Width, Liberty Red

  • POWERFUL AND DEPENDABLE SNOW MACHINE: 179cc OHV Craftsman engine with electric start. 4 Cycle engine provides maximum power, performance, and durability when clearing snow.
  • WIDE CLEARING WIDTH: With a 21 inch clearing width, this snow blower clears snow up to 13 inches deep from your driveway and walkways. Its strong 8 inch by 2 inch Zag Tread wheels are prepared to assist in moving snow on different types of terrain. Ideal for 6 inch snow fall.
  • AUGER ASSIST DRIVE: While this snow thrower is not self propelled, its rubber auger grips the ground for easier forward movement of your unit. It also includes a user friendly mitten-grip starter handle and an ergonomic gull wing handle.
  • EASY CHUTE CONTROL: Change direction of snow discharge up to 190 degrees. Paired with its optimum clearing power, this snow blower leaves a virtually clean surface.
  • WARRANTY: 2-year limited for peace of mind. This Craftsman snow machine is proudly made in the United States with global materials.
Check Stock

Snowthrower Paddle for Craftsman 22" Snowblower C950-52103, for Murray Snowblower 302565 302565MA, for Noma 20" Snowblower C2030-010 with Hardware Kit

  • Snowblower Paddle for NOMA 20" Snowthrower C2030-010, for John Deere Murray 21" Snow blower, for SNAPPER Snowthrower ESS50220E SS50220E..
  • Snowblower Paddle for Murray Single Stage Snowthrowers 620301x Series, 621450x Series, 621451x Series, 621453x Series, 6210540x Series, 621500x89, 621501x31, 621520x43.
  • Snowblower Paddle for Craftsman 20" 21" 22" Single Stage Snowthrowers 536.88150 536.885213 536.881501 536.885210 536.88140 536.885214 536.885200 536.881500 536.885211 536.885203 536.884220 536.884670 536.881510 536.881510 536.884351 536.881400 536.885214 536.885213.
  • Replace Part Number: 335992MA, 335992, 1687312SM, 302565MA, 302565,1687312 ,1687312YP, 730-340.
  • Set Includes : (4) Half-Round Snowblower Paddles (6 Mount Holes Each) , (2) Square Snowblower Paddles (3 Mount Holes Each) , (1) 90-piece Hardware Set (30 Bolts, 30 Nuts ) , (1) Fuel Filter.
Check Stock

Husqvarna ST324, Husqvarna ST324, 24 in. 254cc Two-Stage Electric Start Gas Snow Blower with Power Steering

  • POWERFUL AND DEPENDABLE SNOW MACHINE: 179cc OHV Craftsman engine with electric start. 4 Cycle engine provides maximum power, performance, and durability when clearing snow.
  • WIDE CLEARING WIDTH: With a 21 inch clearing width, this snow blower clears snow up to 13 inches deep from your driveway and walkways. Its strong 8 inch by 2 inch Zag Tread wheels are prepared to assist in moving snow on different types of terrain. Ideal for 6 inch snow fall.
  • AUGER ASSIST DRIVE: While this snow thrower is not self propelled, its rubber auger grips the ground for easier forward movement of your unit. It also includes a user friendly mitten-grip starter handle and an ergonomic gull wing handle.
  • EASY CHUTE CONTROL: Change direction of snow discharge up to 190 degrees. Paired with its optimum clearing power, this snow blower leaves a virtually clean surface.
  • WARRANTY: 2-year limited for peace of mind. This Craftsman snow machine is proudly made in the United States with global materials.
Check Stock

Huthbrother 302565MA 327072MA Snow Thrower Paddle & Hardware, Compatible with Craftsman Murray 57121MA 1687312SM, for Craftsman Machines 20" 21" or 22" Snowblower

  • ◕‿◕ Replacement part number : CRAFTSMAN 302565, 302565ma, 35992MA, 335992, MURRAY 1687312SM, 302565MA, 302565, 1687312, 1687312YP.
  • ◕‿◕ Replaces Paddles For Auger: 327072MA, 1501981MA 1501981, 327072 and others, S-tens 730-340, N-OMA 20 snowthrower model C2030-010, SNAPPER ESS50220E and SS50220E models.
  • ◕‿◕ Suite includes: (4) Half-Round Snowblower Paddles (6 Mount Holes Each), (4) Square Two specifications Snowblower Paddles (3 Mount Holes Each), (1) 90-pc Hardware Set (thats right 30 stainless steel bolts and 30 nylon locknuts & 30 Washers).
  • ◕‿◕ We Include 2 Different Style Center Rectangles So This Set Will Fit All Three Sizes!!! FITS 20" 21" or 22" Craftsman AUGERS Machines !!! Snow Blower Paddle Set for Murray 1501981MA Snowblower Auger.
  • ◕‿◕ Originally had rivets to hold paddles on. Had to drill out rivets and replaced with stainless steel bolts with self locking nuts. Also used washers on the paddle sides to prevent the nuts from cutting into the paddles. This makes it easier to change paddles in the future..
Check Stock

KINTLE 302565MA, 302565, 335992 Snow Thrower Paddle Set -Compatible with 20, 21 or 22" Craftsman, Noma,Murray Snow Thrower 302565ma,1687312SM, with 90 Pieces Hardware - 8 Pack

  • ➤Replaces Part Numbers: 302565, 302565ma, 35992MA, 335992,1687312SM, 302565MA, 302565, 1687312, 1687312YP.
  • ➤Set Includes: 4x Half-Round Snowblower Paddles (6 Mount Holes Each), 4x Square Snowblower Paddles (3 Mount Holes Each), and 90-Piece Hardware Set (30 Bolts, 30 Nuts ,30 Washers),Measurements: Half-Round Paddles:11-1/8" OD x 1/4" Thick, Square Paddles:1-3/4" W x 3-3/4" L x 1/4" Thick，the other Square Paddles : 1-3/4" W x 5" L x 1/4" Thick.
  • ➤Compatible with 20", 21", or 22" Snowblower Augers for Craftsman, Murray, Noma, Sears, and more.
  • ➤Compatible with Craftsman Model: 536.885210, 536.88150, 536.885213, and 536.881501.
  • ➤Compatible with The Following Murray / Brute Single Stage Snow Thrower Models: 1695538 - Murray 525/21(2009),1695565 - Brute 525/21(2008),620301X4C(2000),620301X4D(2001),620301X4Na(2002),620301X4Nb(2003),620301X54C(2000),620301X54C(2001),620301X54D(2001),620301X54Na(2002),620301X54Nb(2003),620301X61A(2000),620301X61B(2001),620301X61Na(2002),620301X61Nb(2003),620301X79D(2000),620301X79E(2001),620....
Check Stock

2 Pack 754-04195 954-04195A Auger Drive V-Belt Kevlar Line Replacement Belt 754-04195A 954-04195 for MTD Troy Bilt Cub Cadet Snow Thrower 1/2 x37

  • 954-04195A Snowblower Auger Belt for Troy-Bilt 954-04195 Stens 265-081.
  • For :MTD Pro 31AH65FH795 (2013-2015), 31AH64FG795 (2013-2014), Yard Machines 31AH64EG700 (2013-2015), Craftsman 31BH55TH799 (2013-2015), 31BH54TG799....
  • Compatible with : Troy-Bilt, MTD,Craftsman 954-04195, 754-04195, 954-04195A.
  • 2pc 954-04195A Snowblower Auger Belt. 1/2" x 37"(1.2cmx94cm). Manual measured, please allow 1-2cm error. Non original aftermarket part.
  • If you have questions, pls be free to contact us, we will deal with it..
Check Stock

Podoy 954-04195A Snowblower Auger Belt 1/2 x 37 for Compatible with Troy-Bilt MTD,Craftsman 954-04195 754-04195 Stens 265-081 Replacement MTD Pro 31AH65FH795 2013-2015

  • 【UNIVERSAL FIT】:954-04195A Snowblower Auger Belt for compatible with Troy-Bilt 954-04195 Stens 265-081.
  • 【WORKS FOR】:for compatible with Troy-Bilt, MTD,Craftsman 954-04195, 754-04195, 954-04195A.
  • 【REPLACEMENT】:for compatible with MTD Pro 31AH65FH795 (2013-2015), 31AH64FG795 (2013-2014), Yard Machines 31AH64EG700 (2013-2015), Craftsman....
  • 【NOTE】:If you have questions, pls feel free to contact us, we will deal with it asap. The part/product is not sponsored or endorsed by,or....
  • 【PACKAGE INCLUDES】:1pc 954-04195A Snowblower Auger Belt. 1/2" x 37"(1.2cmx94cm). Manual measured, please allow 1-2cm error. Non original....
Check Stock

HAZKO Replacement 954-04050 754-04050 Auger Drive Belt for MTD Snowblower

  • LTA Belt is compatible with below models Craftsman 47846.
  • Compatible Models Craftsman 48624837, 48624838, 486248381, 486248391, 486248392, 48624853 and 486248531 snowblower attachments.
  • Our quality allow high flexibility to prevent stretching and breakageExcellent dimensional stability,High cut resistance and longer life than normal....
Check Stock

POSEAGLE 302565ma Snow Blower Paddles Replaces Craftsman 302565 Auger, 302565ma,335992 Murray 335992ma, Snapper 1687312SM with Murray 55323ma Scraper Blade and 762259MA, 1501122ma Cable

  • ...or Replacement paddles for a Murray snow auger, Murray snow blower paddles model 621450x4nb, 21" Murray auger, paddle blades 21" Craftsman, Craftsman snow blower paddles, Craftsman 22 inch single stage snow blower paddles, Craftsman snow blower auger, Craftsman single stage snow auger 21in, Snapper rubber snowblower.
Check Stock

The ROP Shop | Primer Bulb for 2000-2001 Toro CCR 2450 38413 38419 38428 38429 Snowthrower

  • Replaces Part Number: Tecumseh 570682, 570682A, TC-570682, TC-570682A, 751-0354. Fit For Tecumseh AV520, HMSK100, HMSK105 and HMSK110.
  • Replaces Part Number: MTD 951-10639, 951-10639A, 751-10639, 751-10639A. Fit For MTD 161-JW, 161-JWA, 165-SU, 478-SU, 483-SU, 365-SUA, 490-SU, 365-SUB,....
  • Compatible with MTD, Tecumseh, Craftsman, Toro, Troy-Bilt, Ryobi, Cub Cadet, Bolens, Yard Man, Husqvarna, Lawn Boy, Yard Machines, Husky Snowblower....
  • New High Quality Aftermarket Snowblower Primer Bulb Replacement Parts, The Primer Bulb is Used To Push Fuel Into The Carburetor To Get The Engine....
Check Stock