ReviewsCrank Shaft Connecting

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

JIANKUN Bike Crank Arm Set 170mm 104 BCD with Bottom Bracket Kit and Chainring Bolts for MTB BMX Road Bicycle Compatible with Shimano FSA Gaint Black

  • Material: Alloy 6061 crank, high intensity steel chainring..
  • Bottom Bracket Width: 68-73mm. BCD: 104mm. Crank Arm Length: 170mm, Crank Screw Aliber: 15mm..
  • Hollow one sprocket wheel shaft for mountain bikes, road bikes..
  • Compatible With: Shimano, FSA, Gaint ATX770 ATX770-D XTC 750..
  • Package Include: One fordged crank set, bottom bracket, 4 pcs single chainring bolts, crank screw, crankset bolt allen wrench..
Check Stock

Frabill 1664 Classic Tip-Up Wooden Boxed

  • Traditional hardwood design | 17.5" flag | Ultra-glide shaft for friction-free performance | Large capacity metal spools and dual counterbalance crank nobs to prevent wobbling and false movement.
  • Pre-lubed with Sub-Zero low-temp lubricant | Shaft-in-shaft design allows re-greasing for many seasons of successful ice fishing.
  • Dual trip settings (light or heavy) for versatile options depending on your preference.
Check Stock

MUYDZ Metal Flexible Extension Drill Bit Holder Flex Shaft for Connect Drive Shaft Tip Drill Bit Kit Adaptor Pack of 4

  • Product Name: metal universal flexible shaft / screwdriving bits connecting rod.
  • Dimension of flexible shaft at both ends: the dimension of connecting the hexagon handle of electric drill is 6.35mm (1/4").
  • the dimension of connecting the hexagon inside the batch head is 6.35mm (1/4").
  • The item consists of 4 flexible shafts, each 150 mm / 200 mm / 300 mm / 400 mm long.
  • This flexible shaft can be used for ordinary chuck type electric hand drill and electric screwdriver.
Check Stock

Wadoy 3/4 to 1 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

  • This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch..
  • Alters motors with a different diameter shaft and alters pulleys for a different speed or belt..
  • Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements..
  • Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Made from cold rolled steel, precision machined and tumbled, high durability..
Check Stock

Lisle 58500 Hook for Shaft/Seals , RED

  • Removes cam shaft and crank shaft seals without damage to the shaft.
  • Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes.
  • For more information check the main Lisle tool- 58430.
Check Stock

4 Pcs Flexible Drill Bit Extension, Screwdriver Soft Shafts, 11.6 inch, FineGood Universal Drill Connection - Black, Red, Blue, Orange

  • FLEXIBILITY: The 11.6 inch shaft is of great flexibility to bend, twist and straighten even in narrow confined space..
  • APPLICATION: This soft drill connecting shaft mainly used to narrow space, dead ends and other places that screwdriver is hard to work in, like computer chassis, electrical cabinets, furniture, electrical appliances, etc..
  • SAFETY: Flexible shield protects your hands while the internal shaft rotates freely..
  • EXCELLENT QUALITY: The soft shaft is made of high carbon steel which is practical and durable to use..
  • FIT DRILLS WELL: The 1/4 inch hexagon drill bit connecting shaft fit drills well, suitable both ordinary hand drill and electric drill..
Check Stock

150cc 4-Stroke GY6 Single CylinderMotor Long Case Engine for Scooter ATV Go Kart Engine CVT Auto Clutch Motor Bike with Kick Start Lever Carburetor CDI Starter Solenoid Coil

  • 【Features】Engine Type: GY6 Single Cylinder 4-Stroke. Engine oil type: SF15W-40 not come with oil. Cooling: Air Cooled .Displacement: 150cc.
  • 【High-flow Oil Pump】Reduces the wear of friction pairs and prolongs the engine service life..
  • 【Crank Shaft】 The engine is low speed with high torque and has large diameter bearings for crankshaft connecting rod, increasing the reliability of the bearings..
  • 【CVT】CVT consist mainly of 2 transmission pulleys and 2 transmission belts. It’s compact, simple design offers seamless shifting between an unlimited amount of varying gear ratios, allowing a smooth rate of acceleration.
  • 【NOTE】 Installation Manual Is NOT Included Professional Installation Is Highly Recommended.
Check Stock

All Balls 22-1039 Steering Bearing Kit

  • Specs: Crank Shaft Bearing Kit , 2 Seals, 2 Tapered Bearings.
  • Kits contain upper and lower tapered bearing sets (cup & cone) along with specially designed seals tkeep water and dirt out and grease in.
  • Compatible With/Replacement For: Aprilia Caponord 1200 2014-2017, EVT Caponord 2001-2007, RST 1000 Futura 2001-2004, RSV Mille 2000-2003, RSV Tuono 2002-2005, RSV4 APRC R 2009-2015, RSV4 FACTORY 2009-2015, RSV4 RF 2016-2018, RSV4 RR 2016-2017, RSVR 2004-2008, SL 1000 Falco 2000-2003, Tuono 1000 R 2006-2015, Tuono 1100 V4 2016-2018, Tuono 1100 V4 RR 2016-2018, Ducati 1098 2007-2008, 1098 R 2008, 1098 R Bayliss 2009, 1098 S 2007-2008, 1098 S Tricolore 2007-2008, 1198 2009-2010, 1198 R 2010.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Crank Shaft Bearing Kit built to meet OEM specifications.
Check Stock

Mountain Bike Crankset Square Taper 170mm Crank Set 48T Aluminum Alloy CNC Cycling Racing Bike Accessories with Crank for City Folding Bicycle Electric Bike

  • 【Duarable Material】These crank sets are made from high strength material, ensuring they are long-lasting, lightweight and handle the abusive ways of the trail. Featuring irregular teeth and chain pick-up pins for smooth and fast shifts. High strength steel and CNC aluminium to ensure longevity..
  • 【Compatible With】Crank Arm length: 170mm, Chainring（3/32" 48T)，compatible with 9/16" pedals, chain size 1/2"*3/32, total diameter of chain guard is 208mm (8.19in). Applicable for 20-26 inch folding bike. Please measure the size Check Frame chain stay clearance to confirm it fit your bike before you order..
  • 【New Design】Our crankset has high strength, can be used for a long time. Light weight design, adding no heaviness to you bike, make riding more comfortable and relaxing. Double alloy chainring cover, avoid chain rubbing riders pants, prefect for daily commuting..
  • 【Easy to Install】Adjustable crank bolt help you modify your bike quickly, and provides steel screws for free.When installing the crank, be sure to place the left crank on the right crank shaft, and then lock the two locking screws on the....
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock