ReviewsCrank Shaft Cummins

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

ImpDeal Cummins EGR Differential Pressure Valve Sensor 4921728 Fit for Cummins ISX, Engine Sensor Exhaust Gas Recirculation Pressure Feedback Sensor Assembly Replace 104990-1200 3683323

  • Cummins Engine EGR Differential Engine Pressure Sensor 4921728 Comes with Factory O-Rings.
  • Cummins Engine 4921728 EGR Differential Pressure Sensor - M14 x 2 x 128.
  • Cummins ISX EGR Differential Engine Pressure Sensor.
  • , Meet exacting Cummins specifications, Incorporate state-of-the-art Cummins design technology, Are backed by a worldwide service organization.
Check Stock

Fulton 142410 Dual Speed Winch - 2600 lbs. Capacity, 1 Pack

  • 2, 600 lb. Capacity two-speed winch one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch 'comfort grip' handle.
  • Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just Lift the shift lock and slide the shaft into the desired gear position.
  • Neutral free-wheel position allows quick Line pay out without spinning the handle optional handbrake kit no. 501201 (sold separately) can be installed after the winch is mounted.
  • High-carbon Steel gears for superb strength and long-term durability stamped carbon Steel frame provides rigidity, important for gear alignment, and longer cycle life.
  • Designed for use with 2 inch straps up to 20 feet long.
Check Stock

Diesly 6.7L Cummins Diesel Fuel Filter Replacement for 2010+ Dodge/ RAM 2500 3500 4500 5500 Trucks (1)

  • Includes: (1x) 6.7L Cummins Diesel Fuel Filter.
  • FILTRATION – This filter is made with triple layer paper media sourced & other materials.
  • OE SPECS – Micron filtration rating of 3 to match OE quality. We use and test our parts on our own diesel vehicles every day..
  • COMPATIBILITY with 2010 Dodge Ram 6.7L Cummins & 2011- 2020 RAM 6.7L Cummins Diesel 2500, 3500, 4500, 5500 Diesel Trucks.
  • INTERCHANGE – 68065608AA, Fleetguard FS43255, Baldwin PF9870, Luber-Finer L6806F, Cummins 4947561, Wix 33255, Purolator F36294 ,Premium Guard DF6806,.
Check Stock

Go Kart/Mini Bike Clutch Centrifugal Clutch Engine Clutch 5/8 Inch Bore #35 Chain 12 Tooth 12T Chain 6.5HP

  • Fit 2 - 6.5 HP Small Engines Parts Honda GC160, GC190, GX120, GX140, GX160, GX200.
  • Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3 4 Bore 12 Tooth #35 Chain.
  • Fit Briggs & Stratton 2 - 6.5 HP with 3/4" Shaft 212 212cc Predator Engine Clutch.
  • Fit Centrifical Tecumseh Engines 2 - 6.5 HP with 3/4" Shaft and Any Other Go Cart Motor Auto Engines with 3/4 Crank Shaft and 3/16" Key Way.
  • 3 4 inch Bar Centrifugal Clutch Performance Parts.
Check Stock

New 2700 psi Pressure Washer Pump Replaces AR RMW2.2G24

  • FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS!.
  • 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8" and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE.
  • SPECS: FITS 7/8" Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES.
  • MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4" - CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16" – 6 3/16" - 6 7/16".
  • Please Compare The Picture With Yours Before Purchasing..
Check Stock

Diesly Pro 6.7L Cummins Fuel Filters | 2019-2023 RAM/Dodge 2500 3500 4500 5500 6.7L Cummins Turbo Diesel Engines | Replaces# 68436631AA, 68157291AA

  • LIFETIME WARRANTY - Diesly PRO filters are so good we decided to be the worlds first to offer a free warranty on your fuel injectors just for using our filters. Terms and Conditions apply, see Legal Disclaimer for details. Registration Required..
  • SERVICE SPECS – Micron rating of 3. Replace every 15,000 / 12 Months or as directed by manufacturer. Visit our store for all of your 6.7 Cummins needs! Compatible with all 2019-2022 RAM Dodge Sterling 6.7L Cummins Diesel 2500, 3500, 4500, 5500.
  • INTERCHANGE – INTERCHANGE – Mopar 68065608AA, Fleetguard FS43255, Baldwin PF9870, Luber-Finer L6806F, Cummins 4947561, Wix 33255, Purolator F36294 ,Premium Guard DF6806. - Mopar 68436631AA,.
  • DIY PARTS - Established in 2006 and headquartered in Greensboro NC USA, we have the experience you need to get the job done. We ship parts from our warehouses the same day, never dropshipped. Our support staff is ready when you need us..
  • PARTS - Engine filter is compatible with all 2010+ 6.7 Cummins models. Frame mounted water separator compatible with 2019-2023 6.7 Cummins models..
Check Stock

Fulton 142430 Dual Speed Winch with Hand Brake - 3700 lbs. Capacity, 1 Pack

  • 3,700 lb. capacity two-speed winch with brake one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch ‘Comfort Grip’ handle.
  • Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just lift the shift lock and slide the shaft into the desired gear position.
  • Neutral free-wheel position allows quick line pay out without spinning the handle built in hand brake adds convenience and safety.
  • High-carbon steel gears for superb strength and long-term durability stamped carbon steel frame provides rigidity, important for gear alignment, and longer cycle life.
  • Designed for use with 7/32 inch cable up to 90 feet long – not for use with straps.
Check Stock

Goyappin Bike Cranksets 170mm 104 BCD Bike Crank Arm Set with Bottom Bracket Kit and Chainring Bolts for Road Mountain Bicyle Black 1 Pair

  • 【High Intensity Aluminium Alloy Material】Our bike crankset made of aluminium alloy, light weight, stylish appearance, strong compatibility..
  • 【Precision Work】The multi-stripe fixing method is adopted to ensure the ultimate chain retention, increase the working life, and reduce friction and noise..
  • 【Dimension】BCD: 104mm/4.09in, Crank Arm length: 170mm/6.69in, Outer diameter of shaft: 24mm/0.94in, Bottom Bracket Width: 68-73mm/2.67-2.87in..
  • 【Compatibility】The bottom bracket can be used with a width of 68-73mm, suitable for most mountain bikes and road bikes on the market..
  • 【Package】Package includes one fordged crank set, bottom bracket, 4 pcs single chainring bolts, crank screw, crankset bolt allen wrench..
Check Stock

2800 psi POWER PRESSURE WASHER WATER PUMP Troy-Bilt 020245 020245-0

  • FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS!.
  • 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8" and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE.
  • SPECS: FITS 7/8" Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES.
  • MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4" - CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16" – 6 3/16" - 6 7/16".
  • Please Compare The Picture With Yours Before Purchasing..
Check Stock

New 2700 PSI Pressure Washer Water Pump Fits Briggs & Stratton 020207 020207-1

  • FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS!.
  • 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8" and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE.
  • SPECS: FITS 7/8" Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES.
  • MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4" - CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16" – 6 3/16" - 6 7/16".
  • Please Compare The Picture With Yours Before Purchasing..
Check Stock