ReviewsCrankshaft Case

Farmertec SawKits™ Crankshaft Cylinder Muffler Gasket Compatible with STIHL 066 MS660 650 660 MS650 Chainsaw

  • This listing is about brand new, high quality and Non-original aftermarket replacement parts, 100% tested before sending out..
  • Compatible with STIHL 066 MS660 650 660 MS650 Chainsaw.
  • Package include: 1 X Crankshaft Crank 1 X Crankshaft Grooved Ball Bearing 1 X Crankshaft Grooved Ball Bearing 17x40x14 1 X Oil Seal Set 17X32.9X3.6....
  • FARMERTEC providing high quality aftermarket products, so that you don't need to pay so much money for the genuine one.
  • Note: Pls compare it with your original parts before ordering it to make sure this part will fit.
Check Stock

Assault Racing Products A9724 Big Block Chevy Chrome Triple Groove Long Crankshaft Pulley BBC 396 427 454

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 2, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

ATPTOOL Compatible for BMW N51 N52 N53 N54 N55 Engine Camshaft Timing Locking Tool Kit

  • Compatible Vehicles: Suitable for a wide range of BMW N51, N52, N53, N54, N55 engine 2.5 & 3.0 chain drive, 6-cylinder..
  • Durable:Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool..
  • Usage: For Installing and removing of camshaft/ variable camshaft timing unit,and fixing timing position of camshaft and crankshaft when replacing or adjusting timing belt or chain and timing the engines..
  • Package Including: 1x Camshaft Crankshaft Timing Locking Tool Kit, 1x blow molding case..
  • Engine Compatibility: E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i E64/E65: 630i,730i E66/E70: 730Li,X5 3.0Si E81/E82: 130i,135is E93: 325i,328i,330i,335i E83: X3 2.5i,2.5Si,3.0i,3.0Si E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

Crankshaft Turning Socket Chevy S/B, V6, 4-Cylinder

  • Increase torque and horsepower within the operating range.
Check Stock

Hot Rods 4429 Crankshaft

  • Good quality: exquisite workmanship, stable performance and high reliability..
  • Simple installation: easy to install without complicated tools..
  • Scope of application: suitable for all major brands of mini bikes, off-road vehicles, pocket bikes, all-terrain vehicles.
  • High-quality materials: the engine crankshaft is strong and not easy to damage, durable.
  • Stable performance: professional manufacturing, direct replacement of old or damaged old engine crankshaft.
Check Stock

Delphi SS10875 Crankshaft Position Sensor Grey

  • Single element design provides long-lasting sensor protection.
  • Enhanced sensing functionality helps reduce emissions, improve reliability and drivability.
  • Delphi crankshaft sensors maintain optimal performance during drastic temperature changes.
  • Delphi crankshaft position sensors are manufactured to meet or exceed OE requirements. They undergo certified electrical testing with industry EMI....
Check Stock

Engine Crank Crankshaft Position Sensor Compatible with 2.0L 2.3L 2.4L 03-10 Cirrus Sebring Voyager - 03-07 Caravan Neon Stratus - 03-06 Liberty TJ Wrangler - 07-09 9-5 907763 PC440

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Crossreference with OEM NUMBER 5269873, 5269873AB, 5269873AC.
  • Innovative engineering, manufacturing technology and quality control ensure that STETIG Crankshaft Position Sensor meet or exceed the performance of....
  • STETIG offers complete Crankshaft Position Sensor coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • STETIG warrants its Crankshaft Position Sensor for a period of three years from the date of purchase. Within this period, we will replace any....
Check Stock

ProX Racing Parts 42.1206 Complete Crankshaft Oil Seal Set

  • ProX Racing Parts Racing Parts crankshaft oil seals are assembled in sets for an easy and cost efficient OEM replacement.
  • Manufactured at the leading OEM factories in Japan.
  • Can be used in combination with all other ProX Racing Parts Racing Parts or OEM crankshaft related products.
Check Stock