ReviewsCrankshaft Engine Cat Engine

Schaeffler LuK DMF123 Dual Mass Flywheel, OEM Dual Mass Flywheel, LuK Replacement Clutch Parts

  • ... DMF123 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch replacement..
  • Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the flywheel-to-crankshaft bolt heads is so small that the flywheel must be replaced with every clutch installation..
  • LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a primary section that bolts to the crankshaft, and a secondary section, which the clutch is bolted onto..
  • Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the transmission. By design, dual-mass flywheels cannot be resurfaced..
  • OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is carefully crafted to suit the exact needs of a car, keeping in mind its year, brand and make!.
Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

  • Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
  • Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
  • Fit for the newest Cummins seal and sleeve perfectly.
  • Remove and install front crankshaft seal easily and without damage.
  • Made of high quality steel and black finish.
Check Stock

BETOOLL 19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • 50mm Crankshaft Pulley Removal Tool: Used to maintain the harmonic damper pulley position and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Using of 50mm Tool: Works with a 1/2 inch breaker bar or ratchet. Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain..
  • 19mm Harmonic Balancer Socket: BETOOLL socket could be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • Using of 19mm Tool: Used with 1/2” square drive. This Harmonic Balancer Socket features a deep counter-weighted design to increase torque, so you could quickly and easily break stubborn bolts loose..
  • Tough and Sturdy: Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion. Backed by a lifetime replacement guarantee..
Check Stock

Flieeya Polaris RZR 1000 XP & S Drive Clutch Aluminium Alloy Powersports Clutch Compatible with 2014-2020 RZR 1000 XP XP4 & 2016-2019 RZR 1000-S Models, with Weights & Spring

  • Go Kart Clutch 3/4 Bore 12T for 35 Chain, Perfect for Go Kart, Minibike and Fun Kart Engine 3/4 Bar.
  • Centrifugal Clutch Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh Engines 2-6.5 HP with 3/4” shaft.
  • Mini Bike Clutch Fits Any Other Engines with 3/4 Crank Shaft and 3/16” Keyway, Most 5.5 HP Clones, 6.5 HP Clones and 4-7HP Motors in All Brands.
  • Double Protection: Predator Engine Go Kart Clutch Bolt,Washer,Screws and Allen Wrench are All Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft and Using Screws Set for Double Secures Your Clutch to the Engine.
  • OEM Replacement Quality: Made of Quality Iron Material, Which is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-resisting and Fast Heat Dissipation.
Check Stock

Holstein Parts 2CRK0359 Crankshaft Position SENSOR 1 Pack

  • Holstein Crankshaft Position Sensors are direct OE replacements for these critical engine components, offering perfect fit, form and function for....
  • Precision engineered sensor exactly duplicates the function of the OE component - ensuring smooth, powerful engine performance and maximum fuel....
  • Manufactured with premium materials that ensure rugged, long-term performance and the heat resistance necessary to withstand high engine operating....
  • Grommets, screws, and other hardware are included (where applicable) to ensure proper fit and a tight, leakproof seal.
  • Backed by Holstein's 3 year/36k mile warranty - we believe in our parts and our warranty shows it.
Check Stock

Återhämtning och observation på väg hem del 12

  • Applicable Engine: Four-cylinder EA888 petrols, 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI 2006~2013 VAG series TSI, TFSI EA888 engine(1.8L, 2.0L).
  • Fit Engine Code: BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND,....
  • OEM Equivalent Part Number: T10352, T10352 / 1, T10352 / 2, T10368, T40196, T10354, T10060A, T40011, T40098, T40267, T40271.
  • Just One Case Have All Tools: This tool use for correct the camshaft and crankshaft timing position.the timing tools kit is comprehensive, have all....
  • Accurate: All tools have undergone rigorous engine testing, we use precise processing technology to ensure the accuracy of products, specialized, so....
Check Stock

Microheli CNC Aluminum Tail Drive Pulley - Blade 300X

  • FEATURES: Two-piece aluminum construction.
  • one 6x15mm socket head screw and one 6.3mm inner diameter Washer.
  • REQUIRES: Installing on engine crankshaft.
Check Stock

Franzis Porsche Carrera Racing Engine Model Kit with Collector's Book

  • Transparent engine body with motorised, moving parts.
  • Crankshaft, pistons, valves - everything moves.
Check Stock

Sukhoi Su-15: The Boeing Killer (FlightCraft Book 5)

  • Transparent engine body with motorised, moving parts.
  • Crankshaft, pistons, valves - everything moves.
Check Stock

Orion Motor Tech Engine Timing Tool Kit, Crankshaft and Camshaft Timing Belt Locking Alignment Tool Set Compatible with Ford Focus Escape Transit Volvo S60 S80 V60 V70 More for 1.5L 1.6L VCT Engines

  • ...6-2020), Kugas (2012-2020), Pumas (2000-2002), and Transits (1977-1986).
  • the tool kit is also compatible with late model Volvo S60s, S80s, V40s, V60s, and V70s (2010-2020).
  • EASY TO USE: This OEM-equivalent engine timing belt tool set includes a sprocket locking tool, a camshaft alignment plate, camshaft setting bar, crankshaft pulley alignment tool, crankshaft timing peg, and all the pins necessary for locking the rest of your engine's timing.
  • 1 YEAR WARRANTY: Order this rigorously tested alignment tool set today, knowing that its strong warranty and our usual friendly 24/7 customer service ensure you'll enjoy worry-free shopping and maintenance experiences.
Check Stock

Engine Crankshaft - 4-Stroke Engine Crankshaft 110cc for ATVs Dirt Bikes Pocket Bikes Scooter Accessory Simple installation

  • Fits GM LS1, LS2, LS3, LS6, LS7, L92 To: Pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E.
  • Package Includes: 1 x LS Crankshaft Spacer, 6 x Crankshaft Spacer Bolts..
  • Note : 1. WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft.
  • 2. Required when used with automatic transmission built before 1997， Ensures Proper Clearance Between Crankshaft and Converte.
  • 1 Year Unlimited-mileage Quality Guarantee.
Check Stock