ReviewsCrankshaft Series

40 Series Go Kart Torque Converter Kit,COMPLETE-Bolt On Back Plate,40 Driver and Driven Pulleys,Belt,Cover,Hardware,Fits 8-18hp Motors 1 Shaft,TC40-100 10t-12t Sprockets-Replaces 203015,203015A

40 Series Torque Converter Kit - Easy to install bolt on go kart torque converter kit that fits nearly all 8HP - 18HP engines..
NO JACKSHAFT REQUIRED - Includes Bullet Lines' bolt on 40 series back plate with an integrated jackshaft..
COMPLETE KIT - This is a complete 40 series torque converter kit that includes: Easy Bolt On Back Plate, 40 Series 1" Driver Pulley, 40 Series 5/8"....
FITS GO KARTS - 8HP - 18HP Motors with a 1" Straight Crankshaft, and 1/4" Keyway. Replaces OEM Part Numbers 203015, 203015A.
INSTALL - Bolt-on 40 series back plate with integrated jackshaft will save you time and money. DRIVER PULLEY CAN BE INSTALLED BACKWARDS TO LINE UP....

Check Stock

Deck Engagement Clutch Cable for Craftsman Sears POULAN Husqvarna 532435111 532408714 532197257 AYP 435111 408714 197257

Stainless steel brake rivets for a long and safe service life.
SPEC: 1.00" Crankshaft, 5-5/8" Offset Pulley, Counter Clockwise, 5/8" Belt, 125 ft.lbs torque.

Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..

Check Stock

Engine Crankshaft - 4-Stroke Engine Crankshaft 110cc for ATVs Dirt Bikes Pocket Bikes Scooter Accessory Simple installation

Fits GM LS1, LS2, LS3, LS6, LS7, L92 To: Pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E.
Package Includes: 1 x LS Crankshaft Spacer, 6 x Crankshaft Spacer Bolts..
Note : 1. WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft.
2. Required when used with automatic transmission built before 1997， Ensures Proper Clearance Between Crankshaft and Converte.
1 Year Unlimited-mileage Quality Guarantee.

Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

40 Series Clutch Pulley Driver Driven 8-18 HP.
Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
Includes: All mounting hardware attached to an easy to mount backing plate.

Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
Fit for the newest Cummins seal and sleeve perfectly.
Remove and install front crankshaft seal easily and without damage.
Made of high quality steel and black finish.

Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..

Check Stock

OCPTY OCPTY Harmonic Balancer Crankshaft Belt Drive Pulley Fit For 2005-2007 2010 for Scion tC 2008-2015 for Scion xB 2009-2013 for Toyota Matrix 2001-2008 for Toyota RAV4 2002-2008 for Toyota Solara

COMPATIBLE MODELS - Fit 2007 2008 2009 2010 2011 2012 2013 Nissan Altima, 2007 2008 2009 2010 2011 2012 Nissan Sentra.
PART NUMBERS - Replace for 1340700H010 1347028020 134700H010 594-198 number crankshaft pulley harmonic balancer.
PRODUCT DETAILS - The crankshaft pulley is one of the key functional components on the gasoline engine, which is installed on the front end of the crankshaft and rotates with the crankshaft. It is to drive the power source of other engine accessories, relying on the transmission belt to drive generators, pumps, booster pumps, compressors and other operations.
REPLACE ADVANTAGES - Manufactured to OE design ensuring each balancer will install properly and function as intended.Dynamically balanced for proper absorption of the crankshaft vibrations.
PLEASE NOTE - Please check car make model trim engine,product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer.

Check Stock

30 series driver 3/4 clutch 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement for Comet Manco 3/4 Bore Max Torque

This 3/4" Torque Converter is made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and....
This Comet Torque Converter kits fits for engines with 3/4" Straight Crankshaft, used in small vehicles, riding lawnmowers , small tractors, go karts,....
This 3/4" 30 series Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter, Featuring 6" diameter with....
This 30 Series Go Kart Torque Converter Clutch 3/4" Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines.....
100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time..

Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

...cessed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch shaft adapter 7/8 to 1 crankshaft adapter.

Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
Continue tightening system into place with hand wrench (not included) and remove installer assembly.
CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....

Check Stock