ReviewsCross Clamping

BILITOOLS 15-Piece Bearing Puller Kit Ball Bearing Extractor Bearing Removal Tool Set

  • For the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself..
  • For removing grooved ball bearings without having to dismantle the shaft..
  • Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach..
  • Specification: Clamping width: 20 - 90 mm. Interchangeable heads: Ø 5.5 - 6 - 8 mm. Max. puller depth 200 mm. Suitable for use with ISO bearing sizes : 6004-6010 | 6201-6206 | 6300-6302..
  • Include: 1 x mechanical pressure spindle, 1 x cross-beam, 1 x center screw thread cap, 2 x side bolt with nut and washers, 2 x pulling bolt extension, 2 x extensions for pulling devices, 6 x adaptors.
Check Stock

Groz 7-inch Rapid Action Woodworking Vise | Cast Iron | “Toe-in” Feature 39011

  • Manufactured from close-grained cast iron for long trouble-free service.
  • Accurately machined housings assure smooth sliding movement.
  • Rapid Release via Counter-clockwise rotation.
  • screw will disengage and the front jaws slide freely.
  • Accurately fitted solid steel guide rods reduce wear and tear giving the vises a smooth and true parallel action, free of side or cross deflection.
  • Vise jaws are equipped with a “Toe–In” feature.
  • When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of....
  • The steel main screw has buttress threads for smooth, accurate and responsive adjustment. Body and sliding jaw have provision for attaching wooden....
Check Stock

Woodpeckers Extended Slab Flattening Mill Great for DIY Live Edge Slab Tables With Router Sled Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers Extended Slab Flattening Mill you can now use your router to flatten slabs right in your own shop....
  • HUGE CAPACITY: The Extended Slab Flattening Mill adds an additional pair of 72" rails that can either replace the cross rails to increase width, or....
  • INCLUDES: Includes (4) 72" rails, (2) 48" rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF....
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

2-4-6 Blocks Matched Pair (2 Each), Hardened Steel RC 55-62, 23 Holes (2x4x6 Inches) 246 Precision Ground Machinist Set Up Blocks

  • Includes matched pair 2-4-6 blocks includes 2 blocks.
  • Made of precision-grade tool steel hardened and precise ground on all 6 sides of block, heat treated and case hardened to HRC 57-62.
  • Accuracy with squareness on all sides within .0002 per inch.
  • Cross drilling design gives minimum weight and maximum strength.
  • 23 holes consists of 5 tapped holes that are 5/8-11 for clamping and Holes - 18 untapped holes.
Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Cynamed Olsen Hegar Needle Holder Driver with Multicolor/Rainbow Titanium Coating - Premium Quality - Hemostat with Scissors and Locking Mechanism (5.5 in. (13.97 cm))

  • Aesthetic, titanium-bonded, multicolor coating for a unique look and experience..
  • Perfect for various applications such as suture removal, clamping, cutting etc..
  • Comfortable handle for user control and stability..
  • Made from German grade forging and stainless steel. Autoclavable and Corrosion-resistant..
  • Tip configuration: Cross-serrated jaws with groove.
Check Stock

[Upgraded T-Shaped Joint Version] 10 x 10Ft Photo Video Studio, MOUNTDOG Heavy Duty Adjustable Backdrop Stand Background Support System Kit with Carry Bag & Sandbag for Photography Parties Wedding

  • CLASS AND ELEGANCE: Nothing can beat the unmatchable class and elegance exuded by these stunningly beautiful stands. With shiny clear premium quality and glistening design, this piece of pure elegance is sure to bedazzle whoever sets eyes on it..
  • MULTI-PURPOSE: Create unforgettable decorations in minutes by simply clamping the rod to any dining table, sofa table, or even to your picnic table. Create spectacular displays not just for the holidays but also for weddings, showers, and parties whether indoor or outdoor..
Check Stock

Bessey DUO65-8 24-Inch DuoKlamp One Hand Clamp/Spreader

  • Just turn the knob to change from clamping to spreading while using only one hand.
  • Large flat clamping jaws with soft pads allows clamping sensitive surfaces, right angles and both rounded and pointed work pieces.
  • 24" capacity with 800 lbs of clamping and spreading force.
  • Innovative pump lever allows effort free clamping or spreading.
  • Quick release of jaws with the push of a buttonDescriptionJMCDUO65-8 Features: -DUOKLAMP. -UNSPC CODE: 27112100. -Clamps Clamps mro plant maintenance clamp. -3 1/4IN x 24IN ONE-HANDED. Product Type: -Clamps..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock