ReviewsCross Type Fittings

Seastar Bleed Kit/Fill Kit Leak Free Brass Helm Fitting Rust Free Quick Connect Professional Bleed Kit for Seastar Hydraulic Steering Systems Works With Seastar Hydraulic Steering Fluid

  • ✅ LEAK FREE - The threaded brass fittings will not cross thread which ensures no leaking or mess making when you are bleeding your Seastar hydraulic....
  • ✅ EASY TO USE - The quick connect fittings make bleeding your hydraulics system an effortless task by eliminating the need to screw in both threaded....
  • ✅ RUST FREE - All of the metal within the Seastar bleed kit is brass and stainless steel preventing rust. This ensures everlasting quality even in....
  • ✅ UNIVERSAL - Fittings work with most outboard, inboard/outboard, and inboard hydraulic steering kits including Seastar. Works with nearly all....
  • ✅ SATISFACTION GUARANTEE - If you are not satisfied with the experience the Mountain Top Supply bleed kit offered you, please reach out within the....
Check Stock

DELTA FAUCET 441-WH-DST, 3.00 x 13.00 x 21.80 inches, White

  • Sleek design with the charm of simplicity.
  • DURAMOUNT Mounting w/ 2-1/2-Inch max deck thickness.
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa, Fittings Type: 3/8" compression fittings, Supply Lines: Included InnoFlex Pex-C Supply Lines, Valve Type: DIAMOND Seal Valve.
Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

  • Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
  • 3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32~140°F.
  • Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

TAISHER 2PCS Black PVC 1-1/2 Bulkhead Tank Connector Adapter Fitting with Gasket for Water Tank Rain barrels Aquariums Bathtubs and Sink

  • Product Type: Bulkhead Water Tank Connector, suitable for installation in water tanks, water towers, buckets, fish tanks, etc..
  • Product material: Made of PVC, strength, durable, will not fade, fall off and crack,These fittings are not allowed be installed for potable water use.
  • Sealing: Threaded connection and embedded gasket form a tight seal, not easy to slip and leak..
  • Easy to install: Can be installed in walls, tanks or panels. The bulkhead design makes it easy for accessories to pass through the holes..
  • [Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Check Stock

3/4\ 4-Way Cross Fitting Connector, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 3/4“)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way cross fitting connector work great without sacrificing functionality..
  • Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft....
Check Stock

1/2\ 4-Way Cross Fitting Connector, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration(10, 1/2“)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way cross fitting connector work great without sacrificing functionality..
  • Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft....
Check Stock

CEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack

  • Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
  • 1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32~140°F.
  • 1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

JACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)

  • SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
  • HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
  • QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
  • LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
  • 100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.
Check Stock

WYNNsky Industrial Air Coupler and Plug Kit, 3/8 Inch High Flow Body Size, 1/4 Inch NPT Threads Size, Steel Material, 9 Pieces Air Compressor Hose Accessories Fittings

  • 3/8 High Flow Body Size: 3/8 Inch body size air fittings provide up to 70% more air flow than 1/4 Inch body air fittings, 1/4 Inch body air fittings provide 35 SCFM at 100PSI working pressure..
  • Air Fittings Standard: There is six locking balls in the coupler which hold the plug securely, sleeve guard is designed to reduce the potential of accidental disconnects for consistent performance. 300PSI of Max Working Pressure..
  • Application: This 3/8 Inch body size with 1/4 Inch NPT threads size air coupler and plug is used to connect components to an air compressor. 1/4 Inch NPT threads size compatible with most air tools and air hose. These fittings can be used with other brands’ fittings with same type and body size. Seal tap is needed..
  • Material: Heat-treated steel air plug which features higher corrosion resistance and longer life. Zine-Plated steel coupler for added durability and reliability..
  • This 9 Pieces air fittings kit including 1pc 1/4 Inch MNPT coupler, 2pcs 1/4 Inch FNPT coupler, 4pcs 1/4 Inch MNPT plug, 2 pcs 1/4 Inch FNPT plug. WYNNsky is committed to providing outstanding value, top customer service and long-lasting, high-quality products to our customer..
Check Stock