ReviewsCrossed Tapered Roller Bearing

MotorbyMotor 513230 Front Heavy Duty Wheel Bearing Assembly with 5 Lugs Fits for Ford Crown Victoria, Mercury Grand Marquis, Lincoln Town Car Wheel Bearing and Hub Assembly (All Models, w/ABS)

  • MotorbyMotor LOW RUNOUT Front Wheel Bearing and Hub Assembly Produced with Innovation Technical that Gets Rid of Annoying Noise. All Models with 5 Lugs, with ABS Heavy Duty Wheel Bearing Assembly..
  • Front Wheel Bearing and Hub Assembly Fits for 2005 - 2011 Ford Crown Victoria All Models (2005 Models Mfg. AFTER 1/05), 2005 - 2011 Lincoln Town Car All Models (2005 Models Mfg. AFTER 1/05), 2005 - 2011 Mercury Grand Marquis All Models (2005 Models Mfg. AFTER 1/05)..
  • QUAD LIP SEAL DESIGNED to Help Prevent Installation Damage and Provide Enhanced Protection for Extended Bearing Life and Durability.
  • Engineered Premium Bearings for Extended life and Improved Fuel Efficiency (Tapered Roller and Ball Bearings)..
  • CONTAINS PREMIUM GREASE to Help improve Performance and Extend Bearing Life, Enhanced Protection Against Wear, Rust, and others.
  • Precision Fits Control Internal Bearing Clearances to Help Maintain Proper Bearing Setting..
  • MotorbyMotor Wheel Bearing & Hub Assembly EASY-TO-INSTALL.
Check Stock

M30 IPE KV100 Pro V2.0 MAD COMPONENTS Drone brushless Motor for Heavy Multirotor Quadcopter Hexrcopter RC DIY

  • More efficient and drawing more power than equivalent motors in the market.
  • Precise manufacturing workmanship, perfect winding, absolutely compete with top brands.
  • This large drone brushless motor was designed for rigorous conditions and endurance flight, IP44.
  • 1 x Double row angular contact ball bearing 1 x Tapered Roller Bearing,Over-sized durable bearings for increased life, durability Support 12-16S.
  • Pay attention the extened wire =70mm. high end heavy lift industrial drone use, max thrust 49kg @60V with 40in prop..
Check Stock

MotorbyMotor 950-001 Front Wheel Bearing and Hub Assembly 4WD with 6 Lugs Fits for Lexus GX460 GX470 (All Models), Toyota 4Runner FJ Cruiser Tacoma (4WD ONLY) Hub Bearing (4WD 4x4, 515040)

  • MotorbyMotor LOW RUNOUT Front Wheel Bearing& Hub Assembly Produced with Innovation Technical that Gets Rid of Annoying Noise..
  • Front Wheel Bearing and Hub Assembly Fits for Lexus GX460 2010 - 2018 (All Models).
  • Front Hub Bearing Fits for Toyota 4Runner 2003 - 2018 (4WD ONLY).
  • Toyota Fj Cruiser 2007 - 2014 (4WD ONLY).
  • QUAD LIP SEAL DESIGNED to Help Prevent Installation Damage and Provide Enhanced Protection for Extended Bearing Life and Durability.
  • Engineered Premium Bearings for Extended life and Improved Fuel Efficiency (Tapered Roller and Ball Bearings)..
  • MotorbyMotor Wheel Bearing & Hub Assembly EASY-TO-INSTALL.
Check Stock

PGFUN Hollow Rotary Actuator High Accuracy Hollow Rotating Platform Rotary Positioners Fitting Nema 34 Stepper Motor Substitutable for Direct Drive Motor and Cam Indexer

  • High Accuracy Rotating Platform: 0.5 arcmin positioning accuracy and 5 arcmin repeated positioning accuracy make it can be applied in high-precision industrial automation scenarios..
  • Equiped with Crossed Roller Bearing: featuring high rigidity, high rotational accuracy, stable rotational torque, and high load-carrying capacity..
  • 360 Degree Rotating Table: it can perform positioning and staying at any angle, the table comes with sensor holder to meet higher standards industrial needs..
  • Easy to Install: It is convenient to contact the loading platform and wiring with hollow design, the table can directly contacting with servo or stepping motor, very easy to install..
  • Have Any Questions on This Hollow Rotating Platform, Free to Contact Us..
Check Stock

Azusa Adapter Hub, Zinc Plated Steel, with 5/8\ ID Sealed Tapered Roller Bearing

  • Model: 32007X (Bore: 35mm, Outer Diamter: 62mm, Total Thickness: 18mm).
  • Single row tapered roller bearings must be used either with a second bearing or as a matched pair.
  • Components are separable and interchangeable that easy for maintenance.
  • Features low friction and low noise that provide operational reliability.
  • Static Load Rating of 59.2kN and Dynamic Load Rating of 43.2kN.
Check Stock

uxcell L44649 Tapered Roller Bearing Single Cone 1.0625' Bore 0.58' Width 2pcs

  • Model: L44649 (Bore: 26.988mm / 1.0625", Width: 14.732mm / 0.58").
  • Single cup (outer ring) for connecting to cones (inner ring assemblies, sold separately) to form a complete single tapered roller bearing.
  • Components are separable and interchangeable that easy for maintenance.
  • Features low friction and low noise that provide operational reliability.
  • Offers heavy load carrying capacity and long service life.
Check Stock

Fiblink Bent Butt Fishing Rod 2-Piece Saltwater Offshore Trolling Rod Big Game Roller Rod Conventional Boat Fishing Pole (6' - Roller Guides)

  • ... alloy bent butt. Durable PU Super fiber leather grips offer light weight and all day comfort. It is very wear-resistant, cold resistant, breathable and aging resistant. There is a gimbal cross on the bottom of the rod butt for rod holders or fighting chairs..
  • Aluminum Alloy Reel Seat -Aluminum alloy wheel seat with tapered hood transitions above and below reel seat protecting cap. Made of spiral metal, it is tightly connected with the fishing boat, strong and firm, and it will not pull off even when catching big fishes. There is a groove at the connection of the rod, which helps to align the guide and prevent rotation..
  • Excellent Design - It is ideal for Marlin, Yellowfin Tuna and record Wahoo. Excellent back bone and sensitive tip for the best action of any rod we have constructed..
Check Stock

uxcell 32007X Tapered Roller Bearing Cone and Cup Set, 35mm Bore 62mm OD 18mm Thickness

  • Model: 32007X (Bore: 35mm, Outer Diamter: 62mm, Total Thickness: 18mm).
  • Single row tapered roller bearings must be used either with a second bearing or as a matched pair.
  • Components are separable and interchangeable that easy for maintenance.
  • Features low friction and low noise that provide operational reliability.
  • Static Load Rating of 59.2kN and Dynamic Load Rating of 43.2kN.
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

  • The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

LKPB RU28 RU42 RU66 RU85 RU124 RU148 RU178 RU228 RU297 RU445 Crossed Roller Bearings CNC Machine Tool Robot Bearing for Industrial Robots（Model RU178XUUCC0P5 115×240×25mm

  • LKPB crossed roller bearings, with proven performance and quality testing, are suitable for the joint parts or rotating parts of industrial robots, as well as machining center tables, robotic parts, precision rotary tables, medical devices, measuring instruments, IC manufacturing equipment, etc..
  • High precision crossed roller bearings, The product accuracy of P5 / P4 / P2 is optional, Low noise, High temperature-resistance, Long life..
  • As a manufacturer, we can provide technical support, please contact us if you have any questions.
  • Complete models, fast delivery, Products can be customized according to requirements.
  • Package include: 1 Piece or depend on your selection.
Check Stock