ReviewsCrossover For Car Audio 2

Polk Audio MM 1242 DVC 12 1260w Car Audio Subwoofer Sub+Mono Amplifier+Amp Kit

...hese ratings when comparing with top brands such as Kicker, RF Fosgate, etc), - 2 Ohm: 500 Watts x 1 Channel.
- 4 Ohm: 1200 Watts x 1 Channel, High-Speed MOSFET Power Supply, Designed, Engineered, Developed, and Quality Controlled in the USA, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry, Low Pass Filter: 50Hz - 250Hz, Subsonic Filter: 15Hz - 55Hz, Phase Control Switch 0-180 degrees, Full IC-Controlled Protection Circuitry, Remote Dashboard Subwoofer Control, Fully Adjustable 12dB Bass Equalizer, Mute and Delay Soft Start System, RCA Preamp Line Output.

Check Stock

ALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit

...e. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on.
Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General.
Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz - 30kHz. THD+N (@ 10W into 4 ohms): 98dB. Weight: 1.9 kg. Dimensions. (W x H x D): 8" x 8" x 2.25". Features:.

Check Stock

Massive Audio CT2 - Silk Dome 160 Watt Max / 80w RMS, 28mm Car Audio Tweeter Set with Crossovers, Surface, Angle or Flush Mount Options

Speaker type: tweeters for car audio, Impedance per speaker: 4 Ohm, Power per tweeter: 25W RMS | 50W MAX, Power per tweeter set: 50W RMS | 100W MAX.
25 mm silk-dome tweeters that feature a CCAW voice coil and neo magnet which allow the car tweeters to recreate vocals and other high frequencies like never heard before.
Custom engineered 1 inch tweeters that feature a voice coil suspended in ferrofluid which provide an accurate reproduction of your favorite tracks.
The tweeters for car audio are housed in a brushed aluminum flush mount bracket to keep your ride looking sharp.
Included: (2) 25 mm silk-dome tweeters, (2) ABS crossover boxes, (2) tweeter connecting wires.

Check Stock

Planet Audio PL2400.4 2400W 4 Channel Full Range Class A/B MOSFET Amplifier Bundle with AC10D 10 1500W Dual 4 Ohm Voice Coil Car Audio Power Subwoofer 2 Pack

COMES WITH EVERYTHING YOU NEED: Bundle includes 1 amplifier and 2 subwoofers.
CRISP AND LOUD SOUND: Planet Audio 2400W 4 Channel Full Range Class A/B Amplifier.
FLEXIBLE OPTIONS: Full range class A/B, MOSFET power supply, high and low level inputs.
DEEP AND RICH BASS: Fixed high pass crossover, variable low pass crossover, and variable bass boost.
POWERFULLY EXTENDS SOUND: 1500 watt dual 4 ohm voice coil car audio subwoofer.

Check Stock

150W Frequency Divider 4~8 Ohm Ajustable Treble/Bass 2-Way Speaker Audio Crossover Filter for Subwoofer HiFi Speaker Home Car Audio Set DIY (2700Hz)

Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
Pure Bass Subwoofer Second-order Crossover Frequency Divider.

Check Stock

Audiopipe CRX-203 2 Way 4 Ohm Car Audio Passive Crossover Networks (2 Pack)

2 Audiopipe Passive 2 Way Car Audio Crossover / Two-Way Speaker and Tweeter 300W.

Check Stock

Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier

1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power.
2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged.
2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply.
Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
INPUTS/OUTPUTS: Low level RCA inputs and outputs.
Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA).
FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode.
Designed to be high sound quality with minimal distortion.
Maximum heat dissipation which minimizes distortion.
SPECIFICATIONS: Variable voltage: 0.2 5 volts.
Crossover type: Electronic switch FULL / LPF / HPF.

Check Stock

Hifonics ZD-750.4D Zeus Delta 700 Watt Four Channel Amplifier

...eneration with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators..
HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power..

Check Stock

DS18 EN2T High Density Abs Universal A Pillar Pod 2 X 1 Tweeters (No Tweeters)

300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.

Check Stock

Hifonics ZG-1800.1D ZEUS Gamma 1800w Car Audio Class D Mono Amplifier+Amp Kit

...h minimal distortion, RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant, High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power, Operation Mode: Mono only.
Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation..
Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit, Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile..
Features of RWK41: 1 - 17' High Grade Twisted ....

Check Stock

Pyle Auto 2-Channel Bridgeable Marine Amplifier with Bluetooth Speakers, White

WIRELESS BLUETOOTH CONNECT: This bluetooth is built in with 2.0 version and with the wide range that could reach up to 30’ + feet even on underwater. It has power protection circuitry and electronic high crossover network that bridge.
COMPACT AND POWERFUL: This bridgeable multi-channel amp is prime class and slim pack with 2x100 Watts RMS @ 4Ohm, 2x 200Watt MAX @ 4Ohm and 2x300 Watt RMS @ 2 Ohm and has wire auxiliary RCA audio connection and integrated cable for easy installation..
WORKS TO ALL DEVICES: This powerful multi 2-channel marine and car amplifier can immediately connect to all of your favorite gadgets such phone, ipod, iphone, android, tablet and can be used for boat or aquatic vehicle application or in your car..
WEATHERPROOF WATER RESISTANT DESIGN: This extremely efficient, 2 channel, 200w outdoor amp is fully marinized with a waterproof and rust resistant coating on the PCB and mechanical casing. Truly, lives the one and only legacy of an auto amplifier..
INCOMPARABLE SPEAKER: This latest 200watt 2 channel subwoofer amplifier takes your small vehicle’s no filter music audio system to the next level. It is install with full HD sound, bass control and LED lights indicator that your stereo is working..

Check Stock