ReviewsCrowfoot Wrench Set

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

BILITOOLS 15-Piece Universal Ratcheting Serpentine Belt Tool Set

  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley..
  • Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
  • Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
  • Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
  • Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..
Check Stock

Orion Motor Tech OMT Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool for Tie Rod Removal and Installation, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube and Tool Case

  • ...ER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion.
  • the 1/2 Inch drive tube handle with a 2.2 in inner diameter allows servicing on small cars, pick-ups, and SUVs.
  • 12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm.
  • UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit.
  • works on inner tie rods with inaccessible wrench flats.
  • SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength.
  • the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters.
  • the knurled handle provides firm control.
  • HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use.
  • select the right adapter, slide it over....
Check Stock

BILITOOLS 14-Piece Jumbo Crows Foot Wrench Set, 1/2\ Drive Big Crowfoot Wrench, SAE, 1-1/16\ - 2\ mm, CR-V Steel

  • 1/2" drive jumbo crowfoot wrench set included: 1-1/16.
Check Stock

BILITOOLS 15-Piece Universal Serpentine Belt Tool Set, Ratcheting Serpentine Belt Tensioner Tool Kit

  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case..
  • Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
  • Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
  • Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
  • Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..
Check Stock

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

  • 【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
  • 【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
  • 【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
  • 【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
  • 【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..
Check Stock

RockShox 31mm Flat Wrench for Vivid Air Reservoir

Check Stock

Sunex 97436A 1/2-Inch Drive 36-mm Jumbo Crowfoot Wrench

  • Sunex tools hand tools-hands on control for every size and shape.
Check Stock

GEARWRENCH 10 Pc. 3/8' Drive Crowfoot Wrench Set, Metric - 81909

  • Crowfoot wrenches provide greater access to hard-to-reach fasteners and fittings.
  • Open end wrench works on fasteners when there are height restrictions.
  • Bright, full polish chrome finish wipes easily clean and resists rust and corrosion.
Check Stock

SATA 3-Piece Full-Polish Metric Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09033U

  • [VERSATILE SET] Professional tool set grips six common sizes of flare nut– 9X10mm.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

SATA 3-Piece Full-Polish SAE Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09032U

  • [VERSATILE SET] Professional tool set grips six common standard sizes of flare nut with 3/8x7/16, 1/2x9/16 and 5/8x11/16-inch tools.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock