ReviewsCrowfoot Wrenches

BILITOOLS 15-Piece Universal Ratcheting Serpentine Belt Tool Set

Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley..
Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..

Check Stock

TEKTON 3/8 Inch Drive Crowfoot Wrench Set, 17-Piece (8-24 mm) - Rack | Made in USA | WCF92202

Includes 17-pc. crowfoot wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
Ultra-compact, made to fit into tight spaces where other tools can't reach.
Lean design is optimized for both strength and access by using steel only where it matters and eliminating the excess.
Engraved size markings and item numbers for easy identification.
Detent holes offer maximum retention for situations when you can't risk the wrench coming off.

Check Stock

TEKTON 1/2 Inch Drive Crowfoot Wrench Set, 10-Piece (11/16 - 1-1/4 in.) - Rack | Made in USA | WCF92401

Includes 10-pc. crowfoot wrenches: 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 inch.
Ultra-compact, made to fit into tight spaces where other tools can't reach.
Lean design is optimized for both strength and access by using steel only where it matters and eliminating the excess.
Engraved size markings and item numbers for easy identification.
Detent holes offer maximum retention for situations when you can't risk the wrench coming off.

Check Stock

TEKTON 1/2 Inch Drive Crowfoot Wrench Set, 21-Piece (11/16-1-1/4in, 17-32 mm) - Racks | WCF92601

Includes 21-pc. crowfoot wrenches: 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 inch, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32 mm.
Ultra-compact, made to fit into tight spaces where other tools can't reach.
Lean design is optimized for both strength and access by using steel only where it matters and eliminating the excess.
Engraved size markings and item numbers for easy identification.
Detent holes offer maximum retention for situations when you can't risk the wrench coming off.
Made in USA with 4140 Chromium-Molybdenum steel.

Check Stock

BILITOOLS 15-Piece Universal Serpentine Belt Tool Set, Ratcheting Serpentine Belt Tensioner Tool Kit

Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case..
Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..

Check Stock

Men's Belt Ratchet Dress Belt with Automatic Buckle Brown/Black-Trim to Fit-35mm wide, 01-light Tan, Adjustable from 36

Universal Serpentine Belt ToolsUniversal tools that can be used with Ford, GM, Chrysler, SAAB, VW, Volvo and other models with serpentine tensioners. Its designed for removing and installing serpentine belts on vehicles with spring-loaded belt tensioners..
A Comprehensive Set of ToolsConsists of 4pcs handles, 3pcs crow foot wrenches, 5pcs sockets, 2pcs hex drives, 1pc screw, and 1pc washer, it enables you to finish the job with everything you need..
Multiple Specifications are AvailableAdapters in 3/8" and 1/2", crowfoot wrenches in 13mm, 14mm, and 15mm, and sockets in 13mm, 14mm, 15mm, 16mm, and 18mm to meet your various needs, and ensure it can be applied to more engine models..
Selected Alloy MaterialMade of Chrome-plated and powder-coated carbon steel, this set serpentine belt tools are sturdy and durable with high hardness and toughness, suitable for home and professional use..
Easy Storage Tool BoxComes with a heavy-duty blow-molded plastic carrying case for quick inventory and easy carrying. Its easy to locate and retrieve your tool at a moment, and you will always know when something is missing from your tool case..

Check Stock

Orion Motor Tech OMT Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool for Tie Rod Removal and Installation, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube and Tool Case

...ER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion.
the 1/2 Inch drive tube handle with a 2.2 in inner diameter allows servicing on small cars, pick-ups, and SUVs.
12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm.
UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit.
works on inner tie rods with inaccessible wrench flats.
SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength.
the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters.
the knurled handle provides firm control.
HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use.
select the right adapter, slide it over....

Check Stock

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..

Check Stock

SCITOO Inner Tie Rod Installation Tool Kit with 9 Crowfoot Adapters for Most Cars

...he long socket slips over the tie rod end and the crow foot engages on the socket for easy and installation..
【FEATURES】- Compatible with 1/2" drive wrench, designed for working in cramped conditions where sockets and wrenches just wont work or fit. The socket tool is forged from 45# Steel and each piece of crowfoot adapters is made of heat-treated high-quality steel for excellent strength and durability, and provide excellent protection..
【PACKAGE INCLUDED】- 1x long socket tool. 9x Crowsfeet (29mm, 1-3/16inches, 1-1/4inches, 32.5mm, 1-5/16inches, 33.6mm, 1-3/8inches, 1-7/16inches, and 1-1/2inches), 1x Plastic Carrying Case..
【SUITABLE】- Fits many applications on cars and light trucks. Fit for Toyota, for Nissan, for Ford, for Lincoln, for Mercury and for Chevrolet truck and SUV applications and some Cadillac Escalade, for Hummer H2, for Honda Passport and for Jeep Liberty applications..
【ATTENTION】- We provide 1 year warranty for you. Before purchasing this item, please double check the product details information. If you can not make sure whether it can be used on your vehicles, feel free to contact us for help..

Check Stock

ABN Inner Tie Rod Removal Tool Set - Tie Rod Tool with 9 Crowfoot Adapters to Remove and Install Inner Tie Rod in Cars

...ner tire rod end tool, lock in place with side collar, and then use 1/2-inch (1.27cm) ratchet or impact wrench (not included).
[Complete Front End Repair Tools Set]: Inner tie rod kit includes heavy-duty steel automotive tie rod tool and 9 adapters.
Tie rod remover kit’s crowfoot adapters come in sizes 1-1/2in, 1-7/16in, 1-3/8in, 1-5/16in, 1-1/4in, 1-3/16in, 33.6mm, 32.5mm, and 29mm.
[Built to Last]: Tie rod puller kit is constructed from steel with protective coating to increase strength and help protect your tool from damage.
Slide collar design on inner tire rod remover tool allows for quick adapter insertion and secure locking.
[Always Ready for the Job]: Keep your mechanic tools automotive suspension tool kit organized and easy-to-carry in the blow-molded case with sizes etched into plastic for easy identification.

Check Stock

ScaAuto Golf Cart Accessories Plug 2 Prong Charger Plug DC Crowfoot Charger Handle Plug for 36 or 48 Volt EZGO Club Car Golf Carts

For 36 or 48 Volt EZGO Club Car Golf Carts.
All Connectors made with flame retardant materials.
Club Car 2-Blade Crowsfoot style Connector 'ONLY' Replacement Kit.

Check Stock