ReviewsCryptocurrency Mining Kit

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

...hannel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin and more. The noise of the BTC-X79-5 card mining machine is about 55db when running. It runs very quietly and is perfect for home use..
❤ If you want to use other CPU, please use the CPU below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
❤Please note: Please connect the power supply to the 6pin of motherboard 1.3.6 for power supply to the motherboard. Please connect the fifth GPU to the monitor. Please contact us when the black screen appears..

Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

...PU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame also can be used for RTX 3080/3090, but we recommend that you install 4-6 graphics cards, because after exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports a single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..

Check Stock

Flash Boot (Original)

Does not require internet connection for running and installation | Install or run your favorite Linux directly from USB flash drive alongside other operating systems.
One of the most advanced penetration testing platform we have ever made!.
Great for Mining Cryptocurrency Software.

Check Stock

Flash Boot (Original)

Mint - Most convenient and closest to a regular similar everyday operating systems with lifetime free updates.
Does not require internet connection for running and installation | Install or run your favorite Linux directly from USB flash drive alongside other operating systems.
Comes with Boot-Repair Disk - fix your Windows corrupted computer, does not require internet connection for running and installation.
Great for Mining Cryptocurrency Software.

Check Stock

Installing Kali Linux on Raspberry Pi

Bootable - you can boot with this thumb drive | How to boot with USB Thumb Drive: https://www.techstoreon.com/linux-kali-bootable-USB.html.
Does not require internet connection for running and installation | Install or run your favorite Linux directly from USB flash drive alongside other operating systems.
One of the most advanced penetration testing platform we have ever made!.
Great for Mining Cryptocurrency Software.

Check Stock

MLLIQUEA 2500W Long-line Mining Power Supply, 2U Mining Power Supply for 8 GPU BTC/ETH Rig Miner Machine, 110V-264V PSU with 12000 RPM Violent Fan

Eth Mining Rig PSU – MLLIQUEA 2500W mining power supply can be the perfect tool for your cryptocurrency mining equipment. Low noise design, about 75dB. Above 110V, output rated power 2000W, above 220V, output rated power 2500W. Supports simultaneous use of multiple graphics cards. NOTE: The power supply cannot be used for ASIC miners with protocols or software. ASIC miners L3+, S9, S9i, S9K, 851/852, H0.1, H0.3 can be used..
Upgrade Material – Our mining PSU shell is made of high-quality steel, sturdy and durable, and reusable. The internal wire adopts an upgraded copper core, which is resistant to high temperatures and is more durable than other types of copper core wires, the external material of the power cord fully protects the wire from wear and tear and prevents the interface and graphics card from being burned, reducing your use cost..
Energy Saving – This power supply has a conversion efficiency of up to 89 percent , high efficiency, and energy-saving, using new large-capacity large magnetic ring materials, very stable performance, and can be equipped with more powerful mining machines, which is safer.DC circuit design, and is equipped with multiple power protections, offers your system more reliable and stable output voltages, providing ....

Check Stock

Case Compatible with Ledger Nano X/ S/ S Plus Cryptocurrency Hardware Wallet - BTC Bitcoin, Ethereum, Ripple, Altcoins and ERC Tokens. Storage Carrying Organizer for Crypto Wallet & USB Cables

...e Wallet. For bitcoin mining hardware container is made of hard EVA and PU material, with good waterproof and shockproof. For bitcoin miner case is light and easy to use. For ledger nano s Storage organizer avoids the damage for Bitcoin and prolongs the service life of cold wallet for crypto. (Only box).
Hard wallet cryptocurrency holder with detachable foam slot: The size of the removable foam is perfectly for nano s for ledger wallet to prevent for crypto hardware wallet from being scratched and broken. You can use the cryptocurrency hardware wallet case according to your needs..
For ledger case with elastic band: For bitcoin hardware wallet storage holder with elastic band inside, to fix for crypto cold storage wallet. For ledger hardware wallet case can prevent the for bitcoin wallet cold storage from falling, and provide excellent protection for your for ledger..
Ballet wallet for crypto box with mesh pocket and zipper: The mesh pocket for bitcoin wallet hardware case has a certain space to accommodate the USB cable of the digital wallet cryptocurrency and other accessories.The 360° zipper can fully protect your steel for bitcoin wallet, and the heavy-duty smooth zipper is easy to open and close, providing you with an excellent experience..

Check Stock

2000W Mining Power Supply Support 8 GPUs GPU Mining Rig, ETH Miner, Active PFC, PC 2000W Mining Power Supply PSU for 8 GPU ETH Rig Ethereum Miner Designed 110V-220V

UNIQUE DESIGN – This mining power supply can be a perfect tool for your Cryptocurrency mining rig. DC circuit design, with stable voltage output..
STABLE AND EFFICIENT – Cooling Fan and Auto Fan Speed Control.140MM Large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
ENERGY SAVING – The power supply rated output power 1800W, With up to 93% conversion efficiency, high efficiency and energy saving, Using a new large-capacity large magnetic ring material, the performance is very stable, Widely used in variety of mines and high-power single 12V industrial equipment..
It’s better for Bitcoin GPU mining, Support Up to 8 GPU(GPU is not included).
NOTICE – This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 2300 RPM, so the noise is normal, Using a new large-capacity large magnetic ring material, the performance is very stable..

Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

... the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purchase for this miner, just contact us, and we will give you a satisfactory answer within 24 hours, You take no risk orders from MLLIQUEA..

Check Stock

2000W Mining 2U Single Channel Power Supply, 110-230V Ethereum PSU for 8 GPU ETH Miner Rig Case

【2000-2500W Mining Power Supply】 The mining power supply is mainly designed for cryptocurrency mining. The power supply has ten 6 pin power leads. Note: The power supply cannot be used for ASIC miners with protocols or software..
【Single channel PSU parameters】 The miner PSU can be used in 110V-230V. Input AC110V output rated power is 2000W. Input AC220V, the output rated power is 2500W. Power efficiency is 80% at 110V, Power efficiency is 90% at 220V. Please reasonably calculate the consumption of the GPUs, and reserve 300-400W for the motherboard and other cable consumption..
【Support 6-8 GPU graphics card】 Built in 60mm diameter cooling fan, with speed up to 12000 rpm, Which is conducive to heat dissipation. But the sound will be loud decibel: about 65-69 DB at no load. Support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. We recommend running 6 cards of 3080/3090 without overclocking the GPU..
【Package】 Include 1.2m power cord, cable tie, screw. Over voltage protection, overloading protection, short circuit protection..

Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other)，with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in)，gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
【Upgrade Material】：Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....

Check Stock