ReviewsCurrent Isolation Amplifier

LIVISN No-Source 2-Wire 4-20mA Current Loop Signal Generator Panel-Mounted Current Transducer, Compatible with 2,3,4 Wires

Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
Measured current AC 0-10/20/50A, output signal DC 0-10V..
Easy to install and use, no need to connect DC into the circuit when measuring..
Self-powered, no external power supply required..
Straight-through structure design, isolation withstand voltage up to 2000V..

Check Stock

CR Magnetics CR4411-5 Average RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, 003e= 2K Output Load, 24 VDC +/-10%, 0-5 AAC Input Range, 0 - 10 VDC Output Range

CURRENT MONITORING --- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
STRAIGHT-THROUGH DESIGN --- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
MEASURE CURRENT RANGE --- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
WIDE APPLICATION --- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
ABS OUTER CASTING --- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..

Check Stock

AC Current Transducer Transmitter Transformer Sensor AC Current Converter AC 0-50A to DC 0-5V SZT15-CH-5V

Safe Security: Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
Easy To Use: Easy to install and use, no need to connect DC into the circuit when measuring..
Product Specification: Self-powered, no external power supply required. Measured current AC 0-10/20/50A, output signal DC 0-5V. Straight-through structure design, isolation withstand voltage up to 2000V..
High Quality：The outer casing is made of self-extinguishing material ABS..
Widely Application: Hysteresis is less than 1% and can be used under strong magnetic conditions. Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..

Check Stock

Pump Boys and Dinettes

Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....

Check Stock

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
5kVrms signal and power isolation, Advanced ESD protection (20kV).
Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).

Check Stock

MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,Black & PAC SNI-35 Variable LOC Line Out Converter

Product 1: Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier.
Product 1: TNA251 amplifier delivers 250 watts x 1 at 2 ohms.
Product 1: Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping.
Product 1: TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power.
Product 2: Adjustable Line Output Converter.
Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
Product 2: Utilize Audio Transformer for Noise Isolation.

Check Stock

Wendry Speaker Feet Pad, Aluminum Alloy Speaker Isolation Feet Isolation Stands, Speaker Floor Protectors Mats, Audio Amplifier Feet Pad Speaker HiFi Isolation Damper Pad(Black)

【Anti Vibration Pads】The audio amplifier feet pad plays a important role in reducing booming and protecting your hardwood furniture or laminate floor from cone point feet or spikes.
【High Quality Material】The speaker HIFI isolation damper pad made of aluminum alloy, durable, not easy to fade and oxidize. High-grade plating, beautiful and bright, with good finish, not easy to be scratched.
【Adjustable Rubber Feet】The underside is provided with shock absorber and anti-slip rubber. The damping rubber ring is detachable, according to your needs.
【Universal Base Pads】These are universal base pads, suitable for all speaker spike and cone point feet, help to keep the tones more focused and less noise.
【Wide Application】50x15mm aluminum audio isolation feet, suitable for speaker, amplifier, CD DVD player, turntable recorder, chassis, musical instrument, etc.

Check Stock

Banda 1-Channel Vehicle Audio Bass Amplifier - High-Powered Mono Bass Amplifier w/Subsonic Filter and Low Pass Filter Stable at 1 ohm LED Indicators Sound Specialization - BANDA VIKING8001

POWER SUPPLY: Class D vehicle audio amplifier, Total Power 14,4 @ 1 Ohms: 9500 WRMS, Total Power 14,4 @ 2 Ohms: 7400 WRMS, Total Power 12,6 @ 1 Ohms: 8000 WRMS, Total Power 12,6 @ 2 Ohms: 6100 WRMS, Efficiency @ 2 Ohms: 83%, Efficiency @ 1 Ohms: 73%.
MONO BASS AMPLIFIER INDICATORS: Blue LED: source and powered amplifier indicator, Red LED: output distortion (clipping), Constant - output short circuit indicator, Yellow LED: low voltage battery, Constant - Fuse blown or missing.
POWER OUTPUT AND IMPEDANCE: Input Voltage: 9 to 15V, Input Impedance: 22K Ohms, THD + Noise: less than 1%, Input Sensitivity: 160mV – 600mV, Signal to Noise Ratio: 80dB.
SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
OTHER TECHNICAL SPECS: Recommended Fuse: 400A, Current at Rest: 4,5A, Ave. Current Draw (Sinusoidal): 920A, Ave Current Draw (Music): 400A, Power Wire Gauge: 50mm/0 AWG, Speaker Wire Gauge: 2 x 6mm / 2 x 3 AWG, Size: 2.4’’ x 10.6’’ x 17.7’’.

Check Stock

Performance Teknique ICBM-892 2 Channel Amplifier 1200W MAX

Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.

Check Stock

Dpg-200 Vacuum Transducer with

-10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.

Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..

Check Stock