ReviewsCurrent Magnetic

Amprobe ALC-110 True-RMS AC Leakage Current Clamp with Mechanical Lock Jaw, 6000 Counts Digit Large Scale, Red

  • Low influence of external low frequency magnetic fields: @ IN: 3. 500 mA – 600. 0 mA ≤ 30 A/m, operating class 2.
  • True-rams measurements for accuracy when measuring complex, non-sinusoidal waveforms.
  • Mechanical jaw lock to assure accuracy of low current measurements, avoiding disturbance from measured wires and magnetic fields.
  • Selectable filters: low pass 50/60Hz filter to perform measurements on equipment driven by variable frequency drives (VFDs) or affected by high frequency noise, appliance filter to conduct leakage current measurements on appliances and no filter.
Check Stock

Fluke 3000 FC GM Wireless General Maintenance System Multimeter

  • Wireless general maintenance system kit with a digital multimeter, voltage modules, and flexible current module and probe for measuring AC and DC voltage and current, continuity, resistance, diode test, capacitance, and frequency.
  • Modules can be connected to a test point, and results can be viewed up to 20 meters away on the multimeter.
  • Kit includes a 3000 FC series wireless multimeter.
  • A3001 FC wireless iFlex AC current module.
  • The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect app has all the essentials for convenient test and measurement troubleshooting.
Check Stock

AC Current Transmitter Walfront AC Current Transducer Overload Protector Input AC 0-200A Output DC 0-10V SZT20-CH-10V No Power Required

  • ☛ CURRENT MONITORING -- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • ☛ MEASURE CURRENT RANGE -- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • ☛ STRAIGHT-THROUGH DESIGN -- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • ☛ ABS OUTER CASTING -- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
  • ☛ WIDE APPLICATION -- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock

Current USA eFlux Accessory Wave Pump, 660 GPH | Ultra Quiet, Compact Size, Compatible with Loop | for Marine & Freshwater Aquariums (6004)

  • EASY TO ADD- Add an eFlux accessory wave pump to any Orbit IC LED light* or eFlux Wave Pump Kit and your ready to control and synchronize. Running virtually silent, they use safe direct current (DC) and are completely controllable using LOOP control. A prefilter foam guard and cable protector provide added protection from troublemaker inverts..
  • ADJUSTABLE DIRECTION- The adjustable swivel bracket provides directional water flow precisely where you need it most. Whether you want to direct surging water current at an anemone or produce wave action on the water surface, simply pivot the pump in the direction you want water current and watch it flow..
  • MAGNETIC MOUNT- eFlux Wave Pumps use a magnetic bracket which is easy to install and allows you to position the pump virtually anywhere in your aquarium. A silicone pad absorbs vibration, allowing the pumps to run virtually silent..
  • PREMIUM WAVE PUMP- Efflux controllable wave pumps simulate water flow found in nature, providing tank wide circulation, improving water quality and promoting strong coral growth and fish health.
  • MULTIPLE FLOW MODES- Wave Pulse, Surge Flow, Steady Stream, and Feed Mode.
Check Stock

Statik GloBright Universal Light-Up Cable 3 in 1 Magnetic Smart Charging Cable with USB-C & Micro-USB –Enabled Fast Charging - Unbreakable 3ft Nylon Cord- Lights up in The Dark (Blue)

  • QUICK & CONVENIENT CHARGING: The magnetic usb c charging cable snaps into place so you don’t have to play with multiple wires or risk damaging your equipment from pulling plugs in and out. Simply switch the magnetic cable from one device to the other..
  • WORKS EVERYWHERe, CHARGES EVERYTHING: Magnetic Cord comes with three connectors including a USB-C and Micro-USB charger head. Magnetic charger for all modern phones and tablets. Everything..
  • LIGHT UP, CHARGE UP, HAVE FUN: The perfect led phone charger. Easy to Find at Night. See it in action while it lights up. Charge is great for kids – Never surges or overheats and makes your room, car and everywhere look awesome!.
  • THE SAME MATERIAL USED IN THE MILITARY: The durable nylon cord protects your expensive phone from the constant damages that are caused by the incorrect current provided by cheap and frayed cables that overheat your phone..
  • NEVER OVERHEAT AGAIN: Old phone chargers are slow and can risk overheating when trying to fast charge. The light cables intelligent chip allows a 2.4A current, perfect for fast charging..
Check Stock

New AT&T ZTE Maven 2 4G LTE with 8GB Memory Cell Phone - Dark Gray

  • 【3A Fast Charging and Sync】- Our cable supports Qualcomm QC 3.0 with a maximum output current of 3A. And data Syncing speed up to 480MB/s. CAFELE....
  • 【Certified Safety & High Quality Assurance】- Magnetic charging cables are certified for safety, It also contained 56K ohm resistor to protect your....
  • 【One-Hand Operation】- The magnetic cable allows you to operate the charging cable with one hand for charging on/off. It is convenient and safe to....
  • 【Strong magnetic & Led Light Design】Magnetic usb c cable have super strong magnetic, which will avoid disconnecting. LED lights are designed to....
  • 【Quality Guarantee】Each sale includes a 12-month worry-free warranty and lifetime after-sales service to demonstrate our commitment to quality.....
Check Stock

Aideepen 1200W 20A DC Converter Boost Car Step-up Power Supply Module Adjustable Voltage Converter 8-60V to 12-83V

  • 【Features】Input overcurrent protection.
  • 【DIY projects】It adopts 7 electrolytic capacitors and a 33MM high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions. Use a piece of aluminum radiator on the back to dissipate heat ，Reserve fan mounting holes, suitable for more DIY projects..
  • 【Adjustable Voltage 】1200W 20A DC converter boost Input voltage range is DC 10-60V, Output voltage range is DC 12-80V.can be arbitrary adjustable.
  • Input current: 0.5-20A (MAX),Max output power is 1200W.(exceeds 15A, please add fan cooling）.
  • 【Output Power】Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W，input 60V * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. It is recommended to use a smaller adjustment range..
  • 【Widely Application】can be used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..
Check Stock

NOYITO ACS712 Current Sensor Module Detector ACS712ELC 5A 20A 30A Amps Amperage Range (Pack of 2) (20A)

  • USES: SZT20-CH-420E AC current sensor can measure the AC current in the grid or circuit in real time and convert it to 0-5V / 0-10V or 4-20mA DC current output signal..
  • VERSATILE: It can be combined with various AD to form a variety of digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or match the traditional analog and digital indicating instruments, display the measured values..
  • EXCELLENT ATTRIBUTES: mutual current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • HIGH PRECISION: The product has a hysteresis of less than 1% and can be used in strong magnetic field conditions..
  • ADVANTAGES: It has the characteristics of strong overlapping ability, high precision, high isolation, high safety, low power consumption and strong anti-interference ability..
Check Stock

CR Magnetics CR4411-5 Average RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, 003e= 2K Output Load, 24 VDC +/-10%, 0-5 AAC Input Range, 0 - 10 VDC Output Range

  • CURRENT MONITORING --- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • STRAIGHT-THROUGH DESIGN --- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • MEASURE CURRENT RANGE --- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • WIDE APPLICATION --- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
  • ABS OUTER CASTING --- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
Check Stock

Vickers 508169 Coil

  • * Wide inductance range,high current capability low magnetic leakage..
  • * High-reliability leaded inductor low-resistance leaded inductor..
  • * Axial leaded power inductor radial leaded power inductor UL-polyolefin shrinking tubing leaded inductor..
  • *Package Content: 5Pcs x Inductance Coil.
  • Overall Size: 13 x 26mm / 0.51" x 1.02" (T*D).
Check Stock

3PCS 30A Range Current Sensor ACS712 Module AC/DC for Arduino 30A

  • Current sensor chip: ACS712ELC-30A（Note: there are 3 specifications of the product 5A/20A/30A, Pls choose them accroding to your needs.）.
  • Measuring range: ±30 amps, corresponding Analog output:66mV/A..
  • When there is no the detection current through, the output voltage is VCC/2.
  • Note: ACS712 module is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!.
  • Package includes:3 Pack 30A Current Sensor ACS712 Module..
Check Stock