ReviewsCurrent Sensing Resistors

Current Sensing Switch, SZC03-NC-AL-CH Normally Open Amp Sensor Monitoring Relay, AC 0.2-30A

Current sensing relay for monitoring electrical current.
Current carrying wire is routed through an aperture.
Magnetic modulator technology for a stable and repeatable current trip.
Internal transformer for scaling the current and a voltage reference circuit for a repeatable trip point.
UL Recognized for safety, CSA certified for quality assurance, and RoHS compliant for hazardous substances.

Using 3.5 inch TFT LCD display (resolution 320*480), the brightness of the screen can be adjusted. Language switching between Chinese and English. Two-parameter display can display two parameters of the same input signal..
Overrange display: 120% of range. Measurement of AC/DC Voltage, AC/DC Current and 2/4 Line Resistance. The maximum DC current is 10A and the maximum DC voltage is 1000V. External calibration function to support user self-calibration..
Periodic and frequency measurements, maximum frequency 20 MHZ. Capacitance measurement, maximum 10 mF. True RMS AC voltage and AC current measurements, bandwidth up to 100 kHz..
Optional manual or automatic range. Ten Mathematical Functions: MX+B, MAX, MIN, Average, dB, dBm, REL, Hold, Limit Comparison, Statistics. Supporting a variety of sensors: 10 thermocouples, 4 thermal resistors..
Built-in temperature sensor for cold-end compensation, support automatic and manual compensation. Data Memory Storage and Reading Function for Easy Viewing of Data Information. Supporting SCPI protocol and providing programming documentation..

Designed for general-purpose magnetic field measurement, current sensing, and position sensing.

Current sensing relay for monitoring electrical current.
Current carrying wire is routed through an aperture.
Electrical isolation between circuits (SPDT).
Internal transformer for scaling the current and a voltage reference circuit for a repeatable trip point.
UL Recognized for safety and RoHS compliant for hazardous substances.

Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Manufacturer Part Nos with S or NSV prefix are automotive qualified to AEC-Q101 standard..

Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.

(Set of 2) CANBUS BA15S 7506 1156 LED bulb turn signal lights replacement, error free, just plug-n-play, built-in resistors. Easy installation, no need install extra LED load resistors..
1300 lumens per CAN Bus BA15S 7506 1156 LED signal light bulb, at least 5th brighter than stock halogen lamp. Dual filament, big difference between high and low intensity light output, perfect and best value for replacing turn signal light lamps..
Cross reference number: P21W, 97LL, 97A, 97, 93LL, 93, 87, 7533, 7527, 7506ST, 7506LL, 7506L, 7506, 631LL, 631, 63, 3497LL, 3497, 2396, 199, 1680, 1651, 1619, 1459, 1295, 1259, 12088, 1195, 1159, 1156ST, 1156LL, 1156, 1141LL, 1141, 1129, 1095, 1093, 1073LL, 1073, 1003, etc..
Especially designed for upgrading the rear turn signal blinking light lamps. Color: Pure Red. Voltage: 12V~30V ,built in stable current IC driver for longer lifespan. ONE year warranty..
Please check the Amazon fitment note or the owner manual to confirm the bulb size before purchasing. 6063 aluminum heat sink for the best heat dissipation..

High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
Monolithic Construction with Built-In Base-Emitter Shunt Resistors.

Spanish/English Bilingual - Easy to replace module containing current CPR guidelines and two languages..
Clear confident voice prompts. Also CPR prompts to help the student keep pace with chest compressions.
Made in the USA. Now with a Three Year Warranty.
Prestan Pad Sensing System - Detects Pad Placement - unique Pad Sensing System automatically detects when each pad is placed on the manikin which simulates a live AED allowing for a more realistic training class..
Quality pads that last. High quality training pads that will last a long time with a minimum of 50-60 applications.

[High Quality 1W Resistors Kit]: metal through hole resistors set, durable.
[Resistor Kit 1 Watt 1% 50 Values]: range from 1ohm ~ 1m ohm resistors, totally meet your project.
[Resistor Pack Assorted with Perfect Package]: resistor box organizer, each value packed in small bag with clear mark, easy to find.
[Resistor Assortment 1 Watt Have Wide Application]: compatible arduino resistors, resistor for led lights, resistor for door bell, resistors for teaching.
resistor for DIY projects and experiments ect.
[Ltvystore Resistors Set Enjoy 30Days Replace and 2 Year Quality Guarantee]: E-mail Ltvystore directly if you have problem.