ReviewsCustomizable Reamer Tool

1 3/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56049, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/8 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Drill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Utoolmart Adjustable Hand Reamer 23-26mm High Speed Steel H8 Milling Cutter Tool 1pcs

  • 【High-speed Steel Tool】- Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • 【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • 【Application】- Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

50 Pieces Pipe Screen Filters for Pipe Cleaning Tool,50 Pack Bristle Pipe Cleaner 5 Pieces Straw Cleaning Brushes 3 Pieces 3-in-1 Pipe Reamer Tool for Pipe Teapot Drinkware Cleaning

  • Packing include：50 Pack of Our 3/4-inch 19mm ,50 pack Bristle Pipe Cleaner 5 Pieces Straw Cleaning Brushes 3 Pieces 3-in-1 Pipe Reamer Tool ,sufficient quantity to meet your cleaning needs.
  • Thoughtful design: the pipe tamper tool is made in metal, with stylish design, easy to use and very practical.
  • Light and easy to carry with the key chain loop.
  • Durable and sturdy: made of quality stainless steel, the pipe reamer tool is with 3 in 1 design, anti-rust, lightweight and portable to carry.
  • Bundles pipe cleaner are flexible steel wire and white mane bristle.
  • The drinking straw cleaning brush is made of soft nylon bristles and steel wire, durable and reusable.
  • The screen pipe filter is made of 304 stainless steel, prevent the hot ash and embers from entering the pipe.
  • Practical cleaning gift: just gift this pipe cleaner tool set to your husband, father, grandfather and any close friends, practical gift on birthdays, Christmas, Father's Day, weddings, anniversaries and more.
  • Proper size: the pipe reamer tamper measures about 9 cm/ 3.54 inch in length, 2.6 cm/ 1.02 inch in width, can be easily tucked into your pocket for convenient carrying, and it is a practical tool which provides utility and function.
  • The bristle pipe cleaner is approx. 16 cm/ 6.30 inch i....
Check Stock

uxcell Adjustable Hand Reamer 19-21mm High Speed Steel H8 6 Straight Flutes Milling Cutter Tool

  • High-speed Steel Tool: Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock