ReviewsCut Off Saws

Knew Concepts 5' Woodworker Fret Saw with Screw Tension

  • Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails..
  • These saws are made from 1/8" thick milled aluminum with a red anodized finish..
  • The ultra-lightweight truss-style frame weighing just 5.1 ounces is quite rigid allowing the blade to be tensioned to a full 40 pounds minimizing blade breakage and defection and improving overall cutting accuracy.
  • The set of knurled blade clamps knobs securely grip the blade and prevent slippage. Blade tension is easily adjusted via a large knurled screw tension knob. Opening is 4-3/4", depth of cut is 5" and overall length is 13".
  • Kit includes one 15 TPI #7 fret saw blade.
Check Stock

JOUNJIP 2 5/16' Cut Off Wheel Metal Cutting Discs -fits Most Mini Miter Cut Off Saw Chop Saw and Benchtop Saws with 3/8' Arbor -2 5/16 x 1/16' x 3/8' (6-Pack)

  • Make Smooth Precise Cuts -metal cutting wheel cuts through steel, bronze, brass, nuts, bolts, screws, ferous and non-ferous metals.
  • Double Re-enforced -abrasive wheels & discs with fiberglass resin provide long lasting stability and resistance to breaking.
  • Compatible -fits 3/8″ arbor mini miter saws, cut-off saws, benchtop saws and work as rotary tool accessories.
  • 6 replacement saw blades -2 5/16″ inch diameter x 1/16″ KERF thickness x 3/8″ inch arbor.
  • Always take the proper safety precautions, use the blade guard and wear safety equipment -sparks can be emitted when using this accessory.
Check Stock

Woodworking Thin Board Cutting Guide Tools, Thin Table Saw Jig Fast Cutting Limit Thin-Rip Tablesaw T Track Adjustable Positioning Fixing Tool for Cutting Thin Board Table Saw Router Table Band Saw

  • ...STABLE AND CONVENIENT TO USE: The table saw accessory that delivers consistent thin strips without binding, burning or kickback. The Thin Rip Guide works on the offcut side of the blade, making it much safer than methods where the strip is between the saw blade and the fence..
  • ❣ EASY TO USE: Woodworking table saws jig are easy to use and work on most table saws. Positioned on the off-cut side and a few inches in front of the blade, the table saw jip provides a bump stop that delivers consistent dimension strips. It uses a pair of bearings for the contact point. Easily calibrated scales in both inch and metric graduations make it simple to get just the size you want for your strips..
  • ❣ WIDELY USE: From portable job site saws to large cabinet shop saws, the thin table saw jip guide works with any saw that has a 3/8 ” x 3/4″ miter slot with a “T” profile. Strips as thin as 1/32″ and up to 1-1/4″ can be cut, depending upon the spacing between the miter slot and the blade..
  • ❣ DURABLE MATERIAL:The body of the woodworking thin board cutting guide tools guide is machined from a solid billet of top-quality aluminum and anodized for corrosion protection. All other components are either stainless steel or other corrosion resistant materials.....
Check Stock

DYRABREST 110V Mini Bench Top Cut-off Chop Saw Miter Saw Cutter Cutting Machine for Arts Crafts Cutting Wood Plastic Metal Benchtop DIY 7800 R/MIN

  • ◈Mini Cut-off Saw: This is a very sharp and mini cut-off saw. With a speed of 7800r/min, it operates very efficiently, so it cuts items quickly and easily. Moreover, the small size makes it very easy to carry and move. If you're still bothered by traditional saws which take too much effort, you can try our cut-off saw. It can be used to cut wood, plastic, stone, non-ferrous metals, etc..
  • ◈High Working Efficiency: With a speed of 7800r/min, it operates very efficiently, so it cuts items quickly and easily. In addition, the saw blade has very sharp and dense teeth for high cutting accuracy and speed..
  • ◈Versatile: This cut-off saw can be used to cut not only wood but also stone, non-ferrous metals and plastics. However, this cut-off saw can cut up to a maximum thickness of 1.2cm/0.47inch. Please check the thickness of the item before using this cut-off saw..
  • ◈High Stability: This cut-off saw comes with a clamping tool to clamp the cut-off saw to a table or workbench. Once clamped to the table, the cut-off saw is extremely stable and will not wobble or move while working, which not only ensures the accuracy but also reduces the operation risk..
  • ◈Armrest & Clamping Handle: The top of the machine is fitted with a black armrest to make it easier for y....
Check Stock

Lackmond SG20SPL1421 SPL Series Dry Cut Diamond Blade for Cured Concrete 20-Inch by .140 by 1-Inch

  • Dry cut diamond blade for cutting cured concrete outside 48 hours old.
  • Bonded and designed for use on wall saws, air saws and low horsepower walk behind saws.
  • Pre and post-tensioned steel core to eliminate loss of tension and "run-out" during cutting conditions.
  • Delivers excellent speed of cut while maximizing longevity.
Check Stock

FS Tool LM6300 Miter Joint Saw Blade 12 Inch X 100T 1″ Bore

  • For miter joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as....
  • On single or double cut-off mitre machines and radial arm saws.
  • Copper plugs reduce vibration and noise while cutting.
  • Polished plate resists resin build-up (no coating needed).
  • Tooth Configuration: 4 ATB & 1 Raker ensures perfect cut quality with no tear out on bottom side of the cut.
Check Stock

DEWALT Circular Saw / Table Saw Blade, 8-1/4-Inch, 40-Tooth (DWA181440)

  • For miter joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates..
  • On single or double cut-off mitre machines and radial arm saws.
  • Exceptional tensoning and superior steel ensures your blades always runs true.
  • Polished plate resists resin build-up (no coating needed).
  • XL4000 sub micron grade carbide teeth cut cleaner and last longer.
  • Oversized teeth give you more sharpenings.
  • Tooth configuration: 4 ATB & 1 Raker ensures perfect cut quality with no tear out on bottom side of cut.
Check Stock

SUIZAN Japanese Ryoba Pull Saw 7 Inch Double Edge Hand Saw for Woodworking

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
Check Stock

BHA Metal Cut Off Wheels for Die Grinders or Mini Benchtop Chop Saws, 2" x 1/32" x 3/8" - 10 Pack

  • 2" x 1/32" Cut Off Wheel with 3/8" Arbor.
  • 1/32 Inch (.03125") Thickness for Fast Cutting and Minimal Material Loss.
  • Compatible with Die Grinders or 2 Inch Benchtop Cut Off Saws.
  • Capable of cutting iron, steel, stainless steel, and other ferrous metals.
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock

CMT 250.024.10 ITK XTreme Industrial Rip Saw Blade, 10-Inch x 24 Teeth ATB Grind with 5/8-Inch Bore

  • For fast rip cuts on soft/hardwood thanks to the thin kerf design..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood..
  • 0.098 kerf thickness, 0.071 plate thickness, 20° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock