ReviewsCut Off Toolholder

THINBIT 3 Pack LGPT045D57L 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use any straight or 90 degree toolholder..

THINBIT 3 Pack LGPT062D2L 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M04 or sub-spindle side using M03..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
• Use with Large series toolholders. Use LH straight or RH 90 degree toolholder..

THINBIT 3 Pack LGPT045D2R 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
• Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

THINBIT 3 Pack LGPT025D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
• Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

THINBIT 3 Pack LGPT062D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

THINBIT 3 Pack LGPT025D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
• Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

THINBIT 3 Pack LGPT062D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

THINBIT 3 Pack LGPT045D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

10inch Table Saw w/Port for Connecting Dust Collector, Portable Benchtop Table Saw

• High Working Efficiency: With a speed of 7800r/min, it operates very efficiently, so it cuts items quickly and easily. In addition, the saw blade has very sharp and dense teeth for high cutting accuracy and speed..
• High Safety:To ensure your safety during operation, we have also designed a limit switch that can prevent inadvertent operation. Besides, the saw blade of this cut-off saw is protected by a cutting protective cover that reduces the risk of injury and protects you during use..
• Versatile:This cut-off saw can be used to cut not only wood but also stone, non-ferrous metals and plastics. However, this cut-off saw can cut up to a maximum thickness of 1.2cm/0.47inch. Please check the thickness of the item before using this cut-off saw..
• Adjustable Cutting Angle: The cutting angle of this cut-off saw can be adjusted by twisting the star handle from 0° to a maximum of 45°, making it possible to cut a wide range of shapes' items and meet the user's different cutting needs..
• High Stability:This cut-off saw comes with a clamping tool to clamp the cut-off saw to a table or workbench. Once clamped to the table, the cut-off saw is extremely stable and will not wobble or move while working, which not only ensures the accuracy but also reduces the operation ....

DYRABREST 110V Mini Bench Top Cut-off Chop Saw Miter Saw Cutter Cutting Machine for Arts Crafts Cutting Wood Plastic Metal Benchtop DIY 7800 R/MIN

• ◈Mini Cut-off Saw: This is a very sharp and mini cut-off saw. With a speed of 7800r/min, it operates very efficiently, so it cuts items quickly and easily. Moreover, the small size makes it very easy to carry and move. If you're still bothered by traditional saws which take too much effort, you can try our cut-off saw. It can be used to cut wood, plastic, stone, non-ferrous metals, etc..
• ◈High Working Efficiency: With a speed of 7800r/min, it operates very efficiently, so it cuts items quickly and easily. In addition, the saw blade has very sharp and dense teeth for high cutting accuracy and speed..
• ◈Versatile: This cut-off saw can be used to cut not only wood but also stone, non-ferrous metals and plastics. However, this cut-off saw can cut up to a maximum thickness of 1.2cm/0.47inch. Please check the thickness of the item before using this cut-off saw..
• ◈High Stability: This cut-off saw comes with a clamping tool to clamp the cut-off saw to a table or workbench. Once clamped to the table, the cut-off saw is extremely stable and will not wobble or move while working, which not only ensures the accuracy but also reduces the operation risk..
• ◈Armrest & Clamping Handle: The top of the machine is fitted with a black armrest to make it easier for y....

DEWALT Grinder Tool Self-locking Touch Control 3-Inch DWMT70784