ReviewsCutter Cnc Router Cnc

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

3/8 x 3/8 2FL HIGH SPEED STEEL, BALL NOSE, DOUBLE END MILL

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

MYSWEETY CNC 3018Pro-M Engraver Machine Kit, GRBL Control 3 Axis Mini DIY CNC Router Kit, Plastic Acrylic PCB PVC Wood Milling Engraving Machine, with Offline Controller and ER11 and 5mm Extension Rod

  • ⚒️【2-IN-1 CNC 3018 Pro-M】- CNC 3018pro-M DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
  • ⚒️【Offline Controller】- The offline controller is 1G Capacity.You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop..
  • ⚒️【New Control Board】- Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty..
  • ⚒️【Versatile】- It can work on wood, bamboo, paper, leather, plastic, PCB, acrylic, metal surface paint, metal surface plating etc. It can not work on hard metal, iron, glass, 201/304 stainless steel, jewelry or silver, and other hard things.It is recommended to engrave 0.1-0.3mm each time..
  • ⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

Stay Home [Explicit]

  • ...o that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates from the Maker Made team..
  • PRECISION: Maker Made M2 has a highly accurate cutting with a variance of just 1mm. Every piece is purpose-built for accurate, consistent cutting performance. The M2 cuts up to 40% faster than Maslow CNC, its motor is cooler and more efficient, the router bit is smaller for better accuracy..
  • TRIED AND TESTED PARTS MADE TO LAST: Designed and developed in....
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

1\ Radius Roundover Router Bit 1/2\ Shank, Edge Forming Roundover Bit Bead Rounding Over Edging Bit by BINSTAK

  • INDUSTRIAL QUALITY ROUND OVER BEADING ROUTER BIT: Excellent for producing smooth, uniformly rounded edges. Great for edging, beading and/or molding applications. And can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing..
  • USE RANGE for ROUNDOVER ROUTER BIT: Suitable for hard woods, mdf, laminate, particle board, plywood compact panel and etc. Avoid cutting metal and non-wood materials..
  • HIGH QUALITY CNC ROUNDOVER OVER BIT: The sharp YG6X virgin carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This round over edge bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, it can withstand some heavy duty use and the test of time..
  • Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

Centroid 4 axis Acorn DIY CNC motion controller kit REV 4 with CNC software replaces MachMotion,WinCNC,Mach3,EMC2,KCAM4,Smooth Stepper

  • ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for....
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 /....
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the....
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other....
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check Stock