ReviewsCutter Pilot Drill

Hougen HMD904S 115-Volt Swivel Base Magnetic Drill Fabricator's Kit with Integrated Coolant Bottle Plus 1/2\ Drill Chuck, Adapter, and 12002 Rotabroach Cutter Kit

  • The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Large 1-1/2" x 2" capacity - Hidden motor cord - Ergonomic housing - Increased safety with less maintenance.
  • Lower overall height - Pilot light - Two stage magnet - 30% power increase when motor is turned on - Positive slug ejection - Slot Drive arbor for more accuracy and quicker change out of accessories.
  • Feed handles quickly change from side to side - Lift detector safety system - Rear mounted controls - Gravity feed coolant system - Carrying case included (09202) - Two year warranty.
  • Swivel Base adds even greater versatility:Precisely line up your pilot with the holes center location - One stroke lock and unlock handle - Great for horizontal, overhead, tight areas, and getting out over another piece of steel - Patented.
  • Hougen HMD904S 115-Volt Swivel Base Magnetic Drill Fabricator's Kit Includes: HMD904 Swivel Base Coolant, 1/2" Drill Chuck, Adapter, & "12,000-Series" Cutter Kit ((2) Pilots, (2) Wrenches and (5) Cutters (9/16, 11/16, 13/16, 15/16 & 1-1/16")) and Carrying Case, Pint of Coolant, Safety Chain, & Hex Wrenches..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits with Improved Connection Drill Bit with 1/4 Hex Shank and Allen Wrench,

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set....
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable....
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with....
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider....
  • Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report....
Check Stock

Irwin Marples Forstner Bit Set, 14-Piece with SPEEDBOR Countersink Wood Drill Bit, 4-Piece (1966893 & 1882793)

  • Easily drills high-quality flat-bottomed and pocket holes.
  • Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently.
  • Significantly reduces cutting time compared with traditional forstner bits.
  • Tapered drill with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws.
  • Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking.
  • Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
Check Stock

PSI Woodworking PKTRIM8 Pen Kit Barrel Trimmer 8mm Shaft with 3/4\ Steel Cutter Head & Allen Wrench

  • Includes 8mm Pilot Shaft, 3/4" Steel Cutter Head, and Allen Wrench.
  • Square the end of your pen blanks and pen tubes prior to turning on the lathe and pen kit assembly.
  • Shaft acts as a pilot for the cutting head and helps remove excess glue from the tube.
  • Shaft will fit into a drill chuck or lathe chuck.
  • Barrel trimming and squaring is an essential step in penturning projects to ensure a proper fit between the pen kit hardware parts and the turned blank.
Check Stock

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)

  • 【Meric TCT hole saw set includes】 :10 pcs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【High Quality Material】：This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
  • 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is....
Check Stock

23 Pack Woodworking Chamfer Drilling Tool, 6pcs Countersink Drill Bit, 7pcs Three Pointed Countersink Drill Bit, 8pcs Wood Plug Cutter, with L-Wrench and Automatic Center Punch

  • 【Professional Woodworking Set】- Woodworking chamfering drill set includes 6pcs 1/4" hexagonal shank HSS 5-edge 90 degree countersunk bit, 7pcs triangular high-speed steel countersunk bit with L-shaped wrench.
  • 8pcs cork milling bit and 1 automatic center punch.
  • 【Three Pointed Countersunk Drill Bit】- It's made of high-speed steel, with good wear resistance and durability, including 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm pilot holes, large chip flutes and five chamfers for speed up cutting speed and easier to discharge wood chips.
  • 【Wood Plug Cutter】- 3/8" shank wood plug cutter bit set is made of durable carbon steel, used for tapered 1/4.
Check Stock

AUTOTOOLHOME TCT Hole Saw for Steel Tungsten Carbide Tipped Hole Saw Drill Bit T.C.T Hole Cutter with M2 Titanium Plated Pilot Drill Bit Professional for Hard Metal Stainless Steel Cast Iron (2-3/8\(60mm))

  • ...PVC.Note: Cannot be used for concrete, tiles and stone..
  • This TCT hole Saw teeth designed with Three-blade,with outer blade, middle blade, inner blade, small incision resistance and no burrs during drilling. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.ideal for cutting hard metals.
  • T.C.T. cutters widely used for electrical construction, transit work and general metal fabrication.Suitable for installation in drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.Remember to add coolant during continuous high-speed drilling..
Check Stock

S&F STEAD & FAST Spot Weld Cutter Kit 3/8 Threaded Shank Depth of Cut 1/4 Cutting Diameter 5/16” 3/8 7/16” 1/2 9/16” 5/8 3/4 Annular Cutter Set for Hand Drill Small Angular Cutter Bits

  • PREMIUM HSS STEEL Drill bit cutters with thick walls made of super hard M2AL High Speed Steel (HRC 66), designed for wear resistance and superior performance.
  • FAST CUTTING AND LONG LIFE Premium spot weld cutters drill 3 times faster than twist drill bits or double sided cutters and last much longer.
  • ASSORTMENT Small annular cutters with 3/8” threaded shank, cutting diameter of 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4", suitable for cutting up to 1/4” depth.
  • APPLICATIONS Spot face cutter can be used not only for spot weld cutting in auto body panels but also for general hole cutting in sheet metal, piping, conduit, electrical, automotive and HVAC work. Materials suitable for cutting: steel plate, aluminum, cast iron, stainless steel, plastic, laminated materials.
  • STURDY CASE Includes Cutter x 7, Arbor x 1, Pilot pin x 2, Center punch x 1, Small washer x 1, Large washer x 1, Hex wrench x 1.
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock