ReviewsCutting Angle Gauge

Kraft Tool FC518 Undercut Door Jamb Saw

  • Undercuts walls, door jumps, under toe spaces and inside corners.
  • Dual-angle depth gauge for cutting at a straight or a 45 degree angle to the wall.
  • Comes with a carbide tipped blade and case.
  • Caution! Do not overheat the motor or damage will result.
Check Stock

ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metric 60 Degree & & US 60 Degree Thread Pitch Gauge for Industrial Measurement

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

NEW QEP ROBERTS 10-56 ELECTRIC 6" LONGNECK JAMB SAW KIT WITH CASE

  • Adjustable cut height from flush to 1" above floor level.
  • Dual-angle depth gauge allows cutting at "straight on" or 45° angles to the wall.
  • Visual depth gauge scale provides precision depth control at 1/8" increments.
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow

  • The Most PRecise, Versatile Tapering Jig.
  • The MICRODIAL gauge locks in exact incremental taper angles.
  • Precision tapered cutting as accurate as 1/8 of degree.
  • Works with the GRR-RIPPER 3D PUSHBLOCK system for ultimate safety and control.
  • Set your taper angle by degree or rise and run for last cutting.
Check Stock

SPEEDWOX Thread Pitch Gauge Set Thread Measuring Gauge Set 58Pcs Metric & America SAE & Inch 52Pcs Metric & Inch 51Pcs America SAE Screw Pitch Gage Center Gauge Stainless Steel Pitch Gauge

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

DOVAMAN Table Saw, 10inch 15A Portable Table Saw with Stand, Max 73mm (90° Cross) Cutting, Max 52mm (45° Bevel) Cutting, 4800 rpm, 36" Rip Capacity, Electric TableSaw for Wooding - DTS01A

  • HIGH PERFORMANCE: Features a powerful 15 Amp copper motor that provides 4800rpm for smooth cutting wood, hardboard, plywood, blockboard, and chipboard..
  • MULTI-ANGLE CUTTING: This tablesaw can meet all your DIY needs by cutting up to 90 degrees longitudinally (cross-cutting up to 73mm), 0 to 45 degrees beveled (bevel-cutting up to 52mm) and adjustable plus/minus 45-degree bevel gauge..
  • WIDENED DESKTOP: This working table provides extra space with a maximum rip capacity of 16.5 inches on the left side and 12.6 inches on the right. The table top can be extended up to 36.2 inches, while the minimum size is 21.5 inches..
  • ADDED SAFETY: Designed with secure, fixed table legs and transparent blade guards, as well as easy-to-operate switches and over-current protection settings to ensure a safe operation..
  • WE OFFERING: DOVAMAN DTS01A Table Saws with Stand (need extra installing), 10 Inch 24 Teeth Carbide Blade, Blade Guard, Miter Gauge, Rip Fence, Push Bar, Wrench, User Manual, and 24-Hour Fast Response Premium Customer Service..
Check Stock

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

  • ...he double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts.
  • Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations.
  • Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In addition, applicable for cutting wire mesh, plastic, leather, carpet, pvc pipe, cardboard and so on. ....
Check Stock

52pcs Thread Pitch Gauge SAE Stainless Steel Screw Pitch Measuring Tool (Metric&British Whitworth(52pcs))

  • ✿Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • ✿Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿It is useful to check the tool angle when cutting threads on a metal lathe, check the angle on the thread cutting tool on the V-groove of the gauge.
  • ✿Use for check the thread size, can be used for measuring the metric and imperial screw thread.
Check Stock

VIM Hand Tools V2300 Push Pin Removal Pliers Set, 2-Piece

  • [Ensure Flush Cuts]: Whether cutting wires and trimming spurs from models or removing trim clips and pins, the ABN Panel Clip Pliers Automotive Trim Pliers will create clean, precise cuts.
  • [Flat Blade Design]: Flush right angle side cutters pliers have flat 1-inch (2.5cm) long cutter blade that provides flush cuts on up to 12-gauge copper wires.
  • 2.5mm hole allows for easy insulation trimming.
  • [Finish Projects]: Flat edge trims plastic and metal from models and circuit boards.
  • Use electronics right angle cutting pliers wire snips as push pin pliers, rivet removal tools, electrical nippers, jewelry wire flush cutter pliers, craft cutters, or floral wire cutter.
  • [Trusted Quality]: Spring-loaded panel clip cutter pliers cut quickly and cleanly and open automatically, while durable forged steel construction ensures maximum strength.
  • [Anti-Slip Grip]: 4-inch (10.2cm) long rubberized handles provide a secure, comfortable grip for convenience and optimal operation of this wire clipper automotive clip removal pliers.
Check Stock

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
  • ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
  • ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
  • ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..
Check Stock