ReviewsCutting Emery Wheel

120 Volt Electric Circular Saw Blade Sharpener - Bench Mounting Grinder 110W with Diamond & Emory Grinding Wheels

Suitable for sharpening TCT saw blades in range from Ø90-400mm..
Fitted with a Ø100mm diamond coated grinding disc for optimising TCT saw blade performance..
Motor block tilts 25° left and right to handle different blade tooth configurations.
Sturdy die cast aluminum base and indexing arm.
Portable compact design Includes 4" diamond wheel, 4" emery wheel.

Check Stock

Emery Edger Paint Brush 5 pack Refill - 5 Top-up Packs of Fabric Pads for Emery Edger Paint Brush Edging Tool | Extra Painter Infuser

WINNER OF THE “RETAILER’S CHOICE AWARD”: At largest home improvement show in the world. Emery Edgers offers the best-performing paint trim tool available. This paintbrush can be applied on walls, window frames, ceiling, furniture surfaces, etc.
TWO-SHIELD RESERVOIR DESIGN: Our innovative Patented Two-Shield Reservoir Design has finally made it possible to quickly paint perfect edges without tape. Other edgers can only access about 30% of your total trim work. The Emery Edger successfully tackles 100% of your trim work.
A GOOD QUALITY BRUSH: High-Quality Blended Nylon/Polyester Paint Brush with 1.5" Solid Wood Handle. Built-In Double Shield Perfect Edges. It can paint large surfaces and can paint door frames, window sill or other narrow surfaces.
NO DRIPPING PADS AND MESSY WHEEL MARKS ON YOUR TRIM: Guaranteed to produce error-free edges every time. Thin molding, baseboard edges, popcorn ceilings, edges on textured drywall, uneven trim, vents, light switch plates, smoke detectors, on and on.
BETTER THAN EDGERS WITH PADS AND WHEELS: Emery Edger utilizes a patented "two shield system" which ensures paint does not travel around the shield and reach your trim. Edgers with pads and wheels make many messy mistakes that cost you too much time and frustratio....

Check Stock

Emery Edger Two Edging Tools for Baseboard Edges, Uneven Trim - Paintbrush Not Included - Attaches to Any 2 Inch Brush - Pack of 2

WINNER OF THE “RETAILER’S CHOICE AWARD”: At largest home improvement show in the world. Emery Edgers offers the best-performing paint trim tool available. This edger shield does not include a paintbrush but will fit any 2 inch brush. This edger works on any type of edge, as well as on textured walls, wood and concrete..
TWO-SHIELD RESERVOIR DESIGN: Our innovative Patented Two-Shield Reservoir Design has finally made it possible to quickly paint perfect edges without tape. Other edgers can only access about 30% of your total trim work. The Emery Edger successfully tackles 100% of your trim work..
A GOOD QUALITY SHIELD: We have created an edger which utilizes a patent protected two shield reservoir design, which enables our customers to paint the edges. This edger works on any type of trim and can tackle tricky paint jobs on textured surfaces, like popcorn ceilings or textured drywall..
NO DRIPPING PADS AND MESSY WHEEL MARKS ON YOUR TRIM: Guaranteed to produce error-free edges every time. Thin molding, baseboard edges, popcorn ceilings, edges on textured drywall, uneven trim, vents, light switch plates, smoke detectors,....

Check Stock

Jiozermi 24 Pcs Shank Mounted Flap Wheels 1\ x 1\ x 1/4\

Package includes :10 x Sanding Wheel Disc.Impeller diameter : 1.18-Inch(30mm).Impeller thickness : 0.4-Inch(10mm).Clip shank diameter : 0.4-Inch(10mm).
Material : brown corundum abrasives, resin binder.
Using: Wheel can remove paint and sand, grind, level, and strip surfaces and makes quick work of it. These wheels style disks make use easy.
Grinding is sharp, high strength tensile, grinding pressure, good effect, with high production efficiency.
Scope : Selects Mitsubishi emery cloth, used to complex type of polishing, finishing hole between the metal and non-metallic. Especially for trimming, grinding, polishing those uneven surface and side surface.

Check Stock

Dental Lab Shank Mandrel for Polishing Machine 3/32 Inch Pack of 10

♥These mandrels are slotted with a 2.35mm( 3/32")shank..
♥Suitable for polisher machine dental material jewelry.
♥Dental tool accessories work with dental rubber polishing wheel, emery flakes, silicone disc wheels etc..

Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
Designed for use with slow speed 8 inch bench type grinders.
Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
Use with High Speed Steel (HSS)Tools Only.
Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..

Check Stock

Nakpunar 1 Lb Emery Sand Powder to Fill Pin Cushions - Make Your Own Abrasive Pincushions

1 lb Abrasive Emery Pincushion filling. Equal to 1 cup (Brown or Black color due to rock's color).
60 Grit Abrasive Emery Sand also known Emery Grain, Emery Mineral, Emery Powder.
It'll keep your needles clean, sharp and easy to use.
With 1 lb emery you can fill 3, 5 oz pincushions in 2"x3.5" diameter (it may different due the shape).

Check Stock

40 Pcs 1/4 Shank Abrasive Flap Wheel Sander SHITIME Aluminum Oxide Cylindrical Shape Sanding Wheel for Removing and Polishing 80 Grit

【Durable & Sharp】Made of 80 Grit high-performance alumina particles & emery cloth substrate, the die grinder flap wheel have strong grinding force and uniform surface treatment effect. Not easy to drop off sand..
【High Quality】The head of flap wheels is made of gauze layered and glued with resin evenly, so they are not easy to loosen during high-speed rotation with long service life..
【Great polishing effect】Cylindrical design in 8 sizes are easy to access small spaces. The abrasive flap wheel can remove rust, dust and oxide oayer quickly & smoothly..
【Various Models】The sanding wheel set contains 8 sizes of flap wheel: 16mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 80mm.Different sizes meet your various need..
【Wide Application】40Pcs flap wheels 1/4 inch shank Sander Set is perfect for electric drills, cordless drills, die grinders. Used for polishing wood and metal materials such as stainless steel, copper, iron, aluminum, plastic, bamboo and wood..

Check Stock

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

All in 1 Metal Solution - 4.5 diamond blades for grinder for metal diamond plate cutting wheel，Angle grinder cutting wheel ，Our cut off wheel allows dry cutting of many metal type materials likes tubes&structural、sheet metal、stainless steel、solids、rebar、castings、steel plates、non-ferrous..
LONG LIFE - Metal cutting blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc ....

Check Stock

Walter ZIP+ Cutoff Wheel [Pack of 25] - Type 1 Alumina Zirconia Cutting Wheel

Sturdy Construction: this extra thin metal cutoff wheel has alumina zirconia grit construction. The abrasive wheel has an integrated rib design for a cooler and safer cutting.
High Performance: this abrasive grit wheel helps deliver straighter cuts in lesser time. Cut-off wheel with reduced burr and friction is suitable for both manual and machined cutting tasks.
Application Range: the ribbed cutting wheel works on steel, stainless-steel, cast iron, and sheet metals. This extra thin ZIP+ ribbed wheel lasts longer without twisting or bending.
More Safety: the reinforced ZIP+ wheel has been highly reinforced for operator’s safety. Rough cutting wheel with a sturdy build-up and long life needs fewer replacements.
Product Specifications: it measures 4-1/2 in. in diameter, is 1/6 in. thick, and features a 7/8 in. arbor round hole fastening. The package includes 25 ribbed cut-off wheels rated for maximum rotational speed of 13,300 rpm.

Check Stock

GALAX PRO Grinding Discs 20 Pack by 5PCS Grinding Wheel,10 PCS Cutting Wheel 5 PCS Flap Disc with 4-1/2” Diameter and 7/8” Arbor for Angle Grinder

Wide range of application, the assaccessories bits is consisted with 4 kinds of discs: 5pcs cutting wheel in 1/8” thick.
All-purpose grinding disc with very good removal rate, suitable for grinding both edges and surfaces.Outstanding stock removal rate and easy to use.....
Two size of cutting wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
The flap disc includes 3 pcs P80 and 2 pcs P120,which can be used for universal applications, ranging from metal or woodworking, concrete grinding or....
What you can get: 5pcs cutting wheel: 4-1/2”* 1/8” thick.
5 pcs cutting wheel 4-1/2”* 1/25” thick.
5 pcs grinding wheel 4-1/2”* 1/4”....

Check Stock