ReviewsCutting Fluid Boring Bars

WALTON Cut Off Wheels 50-Pack,4 1/2 inch Cutting Disc，Metal & Stainless Steel Cutting Wheel for Angle Grinder,Thin Metal Cutting Disc(50PCS 4 1/2 x0.04x7/8 inch)

  • TIME-SAVING & ECONOMIZES: Not all cutting disc 4 1/2 for angle grinder are as durable and efficient as WALTON, non-woven support greatly enhances cutting and grinding performance.It only takes 3 seconds to cut pipe fittings, saving 2 hours a day. And we give you a better experience at a lower cost，make your job easier..
  • PRECISE & SMOOTH EFFECT: Cut off wheel from WALTON, with an ultra-thin thickness of 0.04 inches, make cuts as smooth as cutting butter.Precise cutting of metal makes the cutting surface smoother without thermal burns, and has no effect on subsequent work. Less wasted material makes work more efficient..
  • PRESSURE RESISTANCE & SAFETY: The maximum speed of cutting can be as high as 13300rpm,it adopts more secure and stable reinforced glass fiber mesh even with 2-5kg side impact force, our 4 1/2 inch cut off wheel can keep running stably during cutting, ensuring the worker's safety..
  • MULTIPLE USES & SATISFACTION: For the best results,the cutting wheels for metal are repeatedly inspected manually.The hard cutting disc can be used to cut steel plates, rebars, stainless steel bars, angle stee....
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE TCMT110204(TCMT21.51) Carbide Turning Inserts TCMT Insert Tain Coated CNC Lathe Inserts for Lathe Turning Tool Holder Replacement Insert, 5 Pieces

  • Size: TCMT 21.51(TCMT110204), 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • Fit our 1/2”Boring Bars Set or 3/8" Mini Turning Tool Holder or Other Brands the same size carbide inserts, you can search the Asin: B07PLX982C or B07PYSN4JC to purchase set directly..
Check Stock

KinRite 20 pcs Cutting Tools Indexable Inserts Turning Inserts DCMT32.51 DCMT32.52 Carbide Inserts for Metal Cutting Cutter bar 20pcs DCMT11

  • Pacake includs: 20pcs DCMT Inserts (5pcs brozun DCMT32.51 +5pcs yellow DCMT32.51 +5pcs brozun DCMT32.52 +5pcs yellow DCMT32.52).
  • 55° Diamond shaped single sided TIAIN coating carbide turning inserts , mainly used for steel, stainless steel finishing, semi-finishing and rough machining..
  • DCMT32.51--Relief Angle : 0.4, DCMT32.52--Relief Angle : 0.8, Cutting angle: 55°, Blade length:11mm, 5/32" Thickness ,1/64" Radius, With chipbreaker.
  • With continuous processing function, Used for turning and finishing on a wide range of materials.
  • Macthing for SDJCR11 /SDXCR11 tool holders /boring bars.
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Loc-Line Coolant Hose Component, Acetal Copolymer, Straight Flow Nozzle, 1\ Width, 1/4\ Hose ID (Pack of 20)

  • Price For: Each Standards: - Cutting Fluid Sub-Category: Cutting Oils Fluid Type: Mobilcut 100 Flash Point: 354 Degrees F Item: Cutting Oil Size: 1 gal. Features: Emulsifies Easily, Contains Bactericide to Guard Against Odors, Pour Point -6 Degrees C Application: Water Mix Cutting and Grinding Fluid Suitable For Wide Range of Ferrous and Non-Ferrous Metalworking Operations Color: Yellow.
  • Specific Gravity: 1.0 Viscosity: 35 cSt @ 40 Degrees C Fragrance: Mild Odor Container Type: Can Country of Origin (subject to change): United States.
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock

Jancy Slugger by Fein - Water Soluable Cutting Fluid for Annular Cutters - 1 Gallon - 64298102080

  • Outstanding Performance - It helps improve the life of your Slugger cutters with this easy to use cutting fluid..
  • Industry Made - It is a water-based cutting fluid that is designed to be used with Slugger cutters to improve the life of a cutter and provide users with exceptional results..
  • Specifications - Specially designed packaging with a sight window ensures proper mixing ratios..
  • INCLUDES - 1 Gallon of Fein Water Soluable Cutting Fluid.
  • Made in USA - Thanks to made in the USA manufacturing in Davenport, IA, Slugger Cutters are recognized for the brand name that says quality..
Check Stock

Hinge Boring Bit Hole Cutter Drill Bit, High-Grade Carbide Tipped Boring Bits for Wood, Plywood, Melamine - Cutting Diameter: 16.5 mm, Overall Length: 70 mm, Right Handed Rotation

  • High-grade tungsten carbide hinge boring bits offer Sharp-cutting, high tolerances, longevity and durability.
  • Hole cutter bits perfectly drill accurate fine circular holes in plywood, hardwood, soft wood, and other composite solid material.
  • Cylinder boring bit best suited for industrial wood processing, model making, installation of hinge, spherical door handle, drawer handle.
  • These hinge hole cutters come with a shank diameter of 10 mm, 57 mm to 70 mm in length, and 14.3 mm to 58.0 mm cutting diameters.
  • Easy to install, and easy to use! All bits can be used on manual as well as automatic multi-spindle boring machines. Order now!.
Check Stock