ReviewsCutting Inserts

Prettywell Bra Pads Inserts, 2 Pairs Latex Bras Inserts for Sports Bras, Bra Cups Inserts for Bikini Tops (beige, S)

  • Latex bra pads inserts:our bra pads for women are made of latex,with breathable holes, our bra cups inserts are very breathable and soft, and our bra pads have a great resilience,can shape your chest very well and offer a cozy feeling at the same time.
  • Our bra pads inserts are easy to use:the lightweight bra inserts are very thin and soft, easy to put it in or out! The protruding moon shape on the bottom can help to support.
  • Widely used bra pads: Bra Inserts pads are perfect as sports bra pads inserts,swimsuit padding inserts,mastectomy bra inserts, and for evening gowns, wedding dresses, sweaters & casual wear,and just about any top that could use a triangular shaped insert.
  • Smart bra cup inserts:our bra pads can be easily cut to the size you want, there are no rough edge after cutting.And 3 size are avaliable,suitable for cup size A,B,C,D.
  • What you get: bra pads inserts*2 pairs,Prettywell guarantee customer service. Prettywell bra pads inserts: 3 months warranty for free replacement.7/24 service for our valued customer as a satisfactory result.Any questions, please feel free to contact us.We greatly pleasure in helping you at any time.
Check Stock

Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035

  • General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
  • The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
  • The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
  • Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
  • Extreme gloss finish, Bar hardness approximately 45HRC.
Check Stock

GBJ 10pcs MGMN200-G/2mm Black Carbide Grooving Inserts 2mm Wide Grooving Carbide Inserts Lathe Cutter for MGEHR/MGIVR Lathe Grooving Cut-Off Tool

  • Model : MGMN200-G, MGMN300-M, MGMN400-M ,grooving width: 3mm.
  • Type: Grooving cut-off inserts, used on MGEHR/MGIVR grooving cutting tool.
  • PVD Coating：Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
  • Package: 10pcs (Boxed) MGMN200-G Grooving Cut-off inserts.
Check Stock

Accusize Industrial Tools 2'' by 3/4'' 90 Deg Square Shoulder Indexable Face Mill with 5 Pcs Apkt1604 Carbide Inserts, 4508-0012

  • 90Degree cutting angle. Radial rake angle: -10Degree. Axial rake angle: +7Degree..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • Cutting Diameter: 2". Arbor Hole d: 3/4"..
  • No. of Inserts: 5. Screw: M4 x 8.4. Inserts: APKT1604.
Check Stock

Indexable Lathe Turning Tool,1/2'' Shank 7 Pieces Carbide Turning Tool Set,Metal Lathe Tools Holder for Turning Grooving Threading with Tin Coated Carbide Inserts Turning insert

  • 1.Package include: 7pcs Holders with inserts (Installed,as the pictures show),Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • 2.The holders made of quality cemented carbide and tungsten steel（40CrMo）, HRC up and down 48 degrees ， high hardness,Offer long life and faster cutting speed.
  • 3.The inserts: carbide material with CVD coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials，the blade is sturdy, low friction coefficient, wear-proof and stable，Good wear resistance, sharp and durable ,smoothing cutting.
  • 4. 7pcs different angles can cut out any model you want with high precision，S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand，S12M-SCLCL06 is left hand , the dimensions as the same as the right hand, other 5pcs holders is 3.9inches/100mm, and the shank diameter is 1/2.
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock

Professional Hair Scissors Salon Shears 6 Inch, Extremely Sharp 440C Blades, DynaCut Razor Sharp Haircutting Shears Hairdressing Scissors with Cleaning Oil and Leather Protection Sleeve

  • ✅ PREMIUM QUALITY ⇨ Made from premium quality Japanese stainless steel 440C, DynaCut Hair Cutting Scissors represent excellent value for money. These professional high-quality stainless steel hairdressing scissors use precision blades and hand-sharpened edges for easy and even hair trimming..
  • ✅ ERGONOMIC DESIGN ⇨ DynaCut’s professional hairdressing scissors are equipped with high quality tension screw to make sure the minimum resistance, smoothly opening and closing, long-time use without loosening. Comes with plastic inserts to make sure they are the perfect fit for your fingers inserts..
  • ✅ VERSATILE ⇨ Professional hair cutting shears are important hairdressing tool for hair beauty salon and home use. It can be used as trimming scissors for haircutting, eyebrow scissors, beauty scissors, styling, beard shears, mustache scissors even as pet grooming scissors. A perfect gift idea for women and men..
  • ✅ BLACK TITANIUM PLATED ⇨ Dynacut Professional True Black Titanium Shear for cutting hair has must-have features, along with a bit of an edge with the gunmetal finish. Titanium is known to be very strong and durable, as well as lightweight.
  • an ideal metal for the DynaCut Professional Shears..
  • ✅ WHAT’S IN THE BOX ⇨ You will get DynaCut ....
Check Stock

10 Pairs Round Disposable Non Woven Fabric Adhesive No Show Nipple Cover Patches Breast Petals Chest Pad

  • Cups Bra Inserts Size: Best for A B cup sports bra and bikini tops.Support free cutting,DIY it for Smaller cup.
  • Bra Inserts pads perfect for swimsuits, bra pockets, evening gowns, wedding dresses, sweaters & casual wear,and just about any top that could use a triangular shaped insert..
  • Inserts can stick under the breast for push up effect ,or a bit to the side for cleavage.One size fits all.Stay in place,No Shifting or Falling.
  • bra inserts pads Nobody will realize your little secret! Our invisible clear breast inserts are designed to as to be as discreet as possible! The transparent gel let your skin tone shine through what makes it perfect for sexy sheer or lace bras, no matter your skin tone!.
  • Great for a subtle boost up and in for larger cup sizes waterproof bra inserts for Excellent for swim or Cosplay or a night out or every day.
Check Stock

QWORK Lathe Threading Tools, 10PCS 16IR AG60 Carbide Threading Inserts for Threading Turning Holder

  • Model:10 Pcs 11IR A60 1/4 Carbide Inserts Blade,suitable for Lathe Threading Tool.Right-handed external thread inserts.
  • Material: cemented carbide.Size:Length:9mm,Thickness:3mm.
  • The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability,Good for cutting and Metal surface finishing.
  • 10 pieces Lathe Threading Inserts in 1 box, packed in plastic containers(box color in random), safe and easy to store.
  • High efficiency and better wear resistance than the traditional welding blade. 1 year warranty, if there is any problem, please feel free to contact us for replacement or refund..
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

Professional Hair Cutting Scissors | Barber Scissors / Shears - 440c Carbon reinforced Japanese Stainless Steel Hair Scissor Best for hairdressing with very sharp blades 6.5 inches

  • SHARP BLADES: These Hair cutting scissors are traditional style professional barber shears with convex blades give you better control over all type of....
  • ERGONOMIC : Lightweight 3.2 ounces Japanese stainless steel hair cutting shears paired with detachable finger rest makes sure that these Hair Cutting....
  • REMOVABLE RUBBER INSERTS: These Hair Scissors are Equipped with removable rubber inserts to ensures that large to small fingers can fit in , also it....
  • TENSION SCREW: Adjustable tension screw makes these barber scissors a fine piece of art as one can adjust the pressure to his or her liking..
  • NOTE: All Ozzar haircutting shears come with already oiled surface to prevent damage to the blades and moving parts, please make sure that these Hair....
Check Stock