ReviewsCutting Steels

F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

Starrett KD0300-N 3-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Starrett KD0400-N 4-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Starrett KD0600-N 6-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Starrett - Sta-0329 KD0500-N 5-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

12 Pk. 7' HSS Straight Knives For Eastman Cutting Machine - Made In USA

  • Pack of 12 Straight Knives For Eastman Industrial Fabric Cutting Machines..
  • High speed steel (HSS) straight knives. High speed steel has proven to be the most popular type of steel for general purpose cutting due to its resistence to wear after many sharpenings. High speed steel maintains a finer cutting edge for a longer leanth of time than other steels which may be available for cutting. Made in USA..
Check Stock

Mobilcut 100, Cutting Oil, 1 gal

  • READY TO USE: Cutting oil that provides maximum lubrication and helps prolong tool life.
  • FORTIFIED WITH: Sulfur and an extreme pressure additive.
  • FOR USE: Excellent for general and severe machining operations on hard metals such as stainless steel and carbon steels as well as on soft metals such as aluminum.
  • IDEAL FOR: Low-speed operations that require high physical lubricity, including broaching, drilling, lathing, milling, tapping and gear-cutting.
Check Stock

SCOTTCHEN Diamond Lapidary Jewelry Grinding Wheel 6\x1\ with 1\ Arbor Hole (for Gem Granite Glass Stone Marble Jade) - 240 Grit

  • Fast cutting and cool grinding of all tool steels..
  • For grinding, sharpening and deburring of hand tools, drills, chisels, blades and cutting tools..
Check Stock

Dremel EZ728-01 EZ Lock Rotary Tool Cutting Discs Accessory Kit, Cut-Off Wheels for Plastic, Metal, and Thin Cuts, 11- Piece Assorted Accessories Set

  • ★ Package Details: JUEMEL Rotary tool cutting discs set include 30pcs mini resin cutting discs, 10pcs resin cutting discs, 10pcs 545 diamond cutting wheels, 5pcs HSS wood cutting saw blade and 5 * mandrels..
  • ★ Ideal Tool for DIY: JUEMEL Rotary Cut-Off Wheel Kit has three assorted cutting discs set for needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • ★ Compatibility: 1/8" (3mm / 3.2mm) shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools. It is easy to install and replace..
  • ★ High Quality: High working efficiency, perfect cutting effect. JUEMEL rotary cutting wheels tool is made of high-quality steels, diamond particles, and fiberglass-reinforced for strength and durability..
  • ★ ATTENTION: For your safety, please must wear gloves and goggles. It may become scorching hot when using diamond cutting wheels. Please add some water to keep it cool..
Check Stock

HORL 2 Pro Rolling Knife Sharpener Engineered in Germany for Straight Edge with Industry Diamonds for Steel of any hardness and Magnetic Angle Technology with 15 & 20 Degrees

  • ...mpressive results. The industrial diamonds used are suitable for steels of any hardness used for knives and are considered to be the most durable and efficient of abrasives..
  • Achieve a sharp, long-lasting edge on your knives with the 20° grinding angle, perfect for robust cutting tasks in the kitchen and beyond..
  • Create a finely honed, razor-sharp edge on your knives with the extra fine 15° grinding angle, ideal for fine cutting work such as sushi, sashimi, Damascus knives, and particularly hard steels with a high carbon content..
Check Stock