ReviewsCutting Tap

Vector Tools Tap and Die Set, Premium, SAE & METRIC, Titanium Coated, 80-Piece

EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
HIGH STRENGTH ALLOY STEEL: GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
Titanium coating provides more rust resistance and durability than plain finished products HARD CASE INCLUDED: ABS hard case for organization, protection and safe storage.
Tap and dies allow cutting and repair of external or internal threads by hand.

Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....

Check Stock

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

For removing Machine Screws and Broken Hand Taps.
Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
When fingers become bent or broken or are too short for further use, replacement fingers are available.

Check Stock

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

For helical coil wire screw thread insert taps.
Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
When fingers become bent or broken or are too short for further use, replacement fingers are available.

Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..

Check Stock

Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

For removing Machine Screws and Broken Hand Taps.
Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
When fingers become bent or broken or are too short for further use, replacement fingers are available.

Check Stock

Azuno 40PCS Metric Tap and Die Set Professional Hand Tapping Threading Chasing Kit for Home Garage DIY

【40 Piece Tap and Die】: Set in cludes 34 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Contructed....
【Most Common Sizes in Metric】: 16 Dies & Taps:....
【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced....
【Easy for Storage】: Comes with a heavy-duty delux case, convinient for storage and carrying. It has identified slot for each piece so that to keep....
【Versitile Threading Tool Set】： This professional set is perfect for cutting and renewing external and internal threads to exact standards.....

Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.

Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.

Check Stock

Husqvarna 522L Gas String Trimmer

Hard chromium plated cylinder bore provides increased durability and extended product life.
Bevel gear designed with high torque and the cutting equipment parallel to the ground for best cutting performance.
Stop switch automatically resets to the ON position for easier starting.
Heavy duty twin line cutting system with Tap 'n Go for quick line feed.
Starting a cold engine is easier with the intuitive choke which is easy to reach and set.

Check Stock