ReviewsCutting Tile

ZELCAN Manual Tile Cutter, Hard Alloy Wheel Cutter with Ergonomic Handle for Porcelain Ceramic Tiles, Laser Guided Precision, Adjustable Measurement Ruler, Anti-Skid Feet (48 inch)

  • 48" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 48 inches straight and 33 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

4.5" Super Tile Blade Diamond Cutting Blade for Cutting and Grinding Granite Marble Porcelain Tile

  • Wet or dry cutting with arbor size:22.23mm-15.88mm.
  • Grinding height：20mm,Cutting height:10mm.
  • 4.5 Inch tile blade available for cutting porcelain,ceramic tile,granite,marble.
Check Stock

youkzuan Professional Porcelain Ceramic Manual Tile Cutter,Glass Cutter Tool Kit with Large Tile Cutter,Tile Pliers,Shaped Glass Cutter,8Pcs Cutting Heads & 2Pcs Cutting Wheels Work Easy and Portable

  • ...!!!CAUTION!!!】When installing, pay attention to the direction of the rod! When scratching, use full force and evenly, the cracks must be deep! When opening, the red dot facing upwards! Do not stick the tiles too far into the pliers! Do not exceed thickness requirements! For large tiles please clamp both ends of cutting line! We strongly recommend testing and practicing with a few scrap tiles before using this cutter, because some skills are required. Read all the notes below this page! You must take out a few waste tiles for testing, because it has certain requirements on strength and operation methods, please operate on the waste tiles before using them normally..
  • 【Parameters】1.Theoretically no limit to max. cutting length, BUT we recommend max. 300cm (118”) 2. Cutting width 5cm-90cm (2”-36“), BUT you can cut max. 180cm (72") if placed along both sides3. Cutting thickness 0.5cm-1.2cm (0.2”-0.5”) Strong and durable, lever principle, save time and improve efficiency..
  • 【Why Choose Us】Professional and precise cutting of tiles, glass and mirrors, LIGHT only 1.6kg (3.6 lbs), so easy to carry and move this tile snap cutter. it can be used for prof....
Check Stock

TUFFIOM 48 Inch Manual Tile Cutter with Ergonomic Handle & Tungsten Carbide Cutting Wheel, Professional Floor Tile Cutter Hand Tool for Porcelain Ceramic Tiles with Anti-Skid Feet & Removable Scale

  • SMOOTH & MULTI-ANGLE CUTTING:The tile cutter has a durable and replaceable tungsten carbide cutting wheel with deep groove ball bearings.It can cut smoothly while ensuring the smooth cutting surface of the tile. What's more, it is equipped with an adjustable scale, which can adjust the angle from 0° to 60°, fix the tiles and cut accurately..
  • REINFORCED THICKENING ALUMINUM SLID TRACK: With reinforced and thickening aluminium slide track, it is not easy to bend, strong and durable. The tile cutter is made of heavy-duty iron material, and both sides have 2 movable shock-resistant support feet, which can be used to fix and stable ceramic tiles.It can ensure the stability and solidity of the cutting process without falling over easily..
  • ERGONOMIC HANDLE:Ergonomic curved non-slip plastic handle. The finger socket design on the surface of the handle can ensure anti-skid and the comfort sense during grip the cutting process, while also saving energy. In addition, the non-slip bottom protective cover and movable support feet can provide stability while protecting the ground and tile cutter..
  • SUITABLE FOR DIFFERENT TILES:The movable support feet increases the maximum cutting versatility. The tile cutter can handle a variety of ceramic tile types. Such as o....
Check Stock

ZELCAN Manual Tile Cutter for Ceramic Tiles or Porcelain Tiles| For Professional, DIY, or Weekend Warriors| Adjustable Laser Guide for Precision Cutting| Anti-Skid Feet| Ergonomic Handle (40 inch)

  • 40" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 40 inches straight and 28 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

VEVOR Tile Cutter 39 Inch, Manual Tile Cutter All-Steel Frame,Tile Cutting Machine w/Laser Guide and Bonus Spare Cutter,Tile Cutter Hand Tool for Precision Cutting Porcelain Ceramic Floor Tiles

  • Professional Grade Cutter Holder: Our ceramic tile cutter is more professional than an ordinary combination knife holder. The handle is made of aluminum die-casting, and the cutting is stable and effortless. It can cut floor materials with a maximum length of 39.4" / 1000 mm and a thickness of 0.24" / 6 mm - 0.59" / 15 mm..
  • Ultimate Precision Cutting: Our manual tile cutting machine adopts infrared laser positioning and patented design sliding head—no need for repeated calibration, precise cutting without shaking, one step in place. Reduce the cutting error of ceramic tiles and make your cutting work more efficient..
  • High Hardness Alloy Cutter Head: To cut porcelain tiles quickly, our cutter head is made of cemented carbide with high hardness and good cutting effect. The cutting is effortless, the cutting work is neater, and the tiles do not leave burrs. In addition to the standard cutter wheel, a gift is given to extend the service life..
  • Detachable Triangle Backer: It can not only cut wall bricks, 3-dimensional bricks, ceramic plates, and other materials but also cut square and triangle floors. Move the detachable triangle backing to catch the tile's bevel and make the tile bevel cut smoother. The bottom plate is upgraded with three aluminum scales ....
Check Stock

Mosaic Tile Cutter Glass Tile Cutter Hand Tool Mosaic Tile Nipper Manual Mirror Cutter Plier for Home DIY Cutting Mosaic Glass Ceramic Mirror

  • ➤【Mosaic Tile Cutter 】The cutting wheel of mosaic tile nipper adopts high hardness tungsten carbide, with the characteristics of rust resistance and wear resistance..
  • ➤【Glass Tile Cutter Hand Tool】The TPR rubber handle allows you to hold and use it effortlessly, very suitable for DIY mosaic glass crafts, used for home improvement, kitchen and bathroom..
  • ➤【Wide Applications】Our tile cutter can cut and break glass or ceramic tiles with a max thickness of 9.5mm (0.37"), used for cutting mosaic, mirror, ceramic, porcelain, glass tile and stained glass quickly..
  • ➤【Easy to Use】1. Use the scoring wheel to draw scratches on glass or tiles. 2. Aligned the scratch with the middle part of glass cutting tool. 3. Break the tile or glass into two pieces..
  • ➤【What You Get】You will get 1pc manual tile cutter and 1 pair of gloves..
Check Stock

Manual Tile Cutter, 2 in 1 Glass Tile Cutter Hand Tool with Glass Breaking Pliers, Mirror Cutting Kit with 3 Tungsten Steel Blade for Home DIY Cutting Glass, Mirror, Ceramic Tile, Glazed Tiles

  • ★【Multifunction】2-in-1 hand tool put the glass cutter and tile breaking plier together, can cut and break the glass or ceramic tiles with the thickness of 3-15mm/0.12-0.59 inch..
  • ★【Fast Cutting】The blade adopts high hardness tungsten steel alloy, with the characteristics of rust resistance and wears resistance. The non-slip T-shaped handle allows you to hold and rotate effortlessly..
  • ★【Scope of Application】The glass cutter can effectively cut glass, ceramic tiles, mirror and glazed tiles, but not for cutting high-density tiles, such as marble tile, unglazed tile, polished tile, vitrified tile, tempered glass..
  • ★【Operation Method】1. Marking a scratch line on the tile. 2. Aligned the guideline on the tile breaking plier body and the marked scratch line. 3. Rotate the handle until the tile is divided..
  • ★【What You Get】You will get 1pc tile and glass cutter, 3pcs cutting blade, 10pcs feet..
Check Stock

GoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)

  • 【Excellent Tile Blade】: The 7” tile saw blade is made of extended performance diamond matrix, which is fairly durable long lasting. Size:180 x 10 x 1.2 x 22.23mm, Thickness: 1.4mm, Outer Diameter: 180mm (7 inch), with 7/8" or 5/8" Arbor, Max speed 13200 RPM. 80m/s. Its great at cutting tile and stone without chipping the finished surface..
  • 【Precise and Clean Cuts】: Our 7” diamond saw blade has a strong core it’s slightly thicker than other blades to have a fine cut and almost no chip-out. Moreover, This little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
  • 【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm P....
Check Stock

SPEEDWOX Mosaic Nippers 8 Tile Nippers with Strong Plastic Breaker Bar Scoring Wheel for Cutting Porcelain Ceramic Mirror Professional Glass Cutters Score Tile Tool Heavy Duty Fathers Day Gifts

  • 【DESIGN】 Please note that the cutting wheel can be scrolled and plastic breaker bar is not fixed. High leverage design for maximum gripping strength. Bi-color TPR ergonomic handles for anti-slip and comfort grip. The spring action reduces hand and wrist fatigue for easy tiling project..
  • 【HOW TO USE】 Step 1: Place the tiles on a flat surface. Then use the cutting wheel scratch the tile. Step 2: Put the clamp portion of this mosaic nipper on the top and it will snap the tile. Step 3: Break the tile into two pieces..
  • 【USAGE】 The tungsten carbide cutting wheel can be perfectly used for cutting glass tile(not included polished tile), porcelain, mosaic, wall & floor ceramic, stained glass & mirror easily and quickly. Ideal for fixing broken tiles and some special cutting in the corner..
  • 【SPECIFICATION】 210 x 56.5 x 20.3 mm / 8.2 x 2.2 x 0.8". Max cutting thickness approx.9.5mm (0.37"). Wheel diameter: 15mm (0.59")..
  • 【ANTI-RUST OIL】 The anti-rust oil may be appeared on the pliers, it can protect the pliers from rusting. It's not dirty or used products, you can clean it with a towel and it will not effect the function..
Check Stock

ROK 4-1/2 inch Diamond Saw Blade Set, Pack of 3

  • 1 continuous rim For Smooth cutting of marble, granite, tile & ceramics.
  • 1 segmented rim For Fast general purpose cutting for masonry, concrete, pavers, Terrazzo, Roof tile..
  • 1 turbo rim For smooth & fast cutting of masonry, concrete, pavers, Terrazzo, Roof tile..
  • Can be used wet or dry, fits angle grinders with a 7/8" or 5/8" Arbor (adapter included for 5/8").
Check Stock