ReviewsCutting Wheels

EZARC Diamond Cutting Wheel 4-1/2 x 7/8 Inch for Metal, Cut Off Wheel with 5000+ Cuts on Rebar, Steel, Iron and INOX

  • [Diamond technology] 1 equals 100, EZARC diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels..
  • [All in 1 Metal Solution] Ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal with over 100X longer life than bonded cutoff wheels in metal cutting applications..
  • [Avoid Injury] Solid steel wheel body greatly reduces risk of shatter and injury for added safety, diamond cutting edge is 100% contaminant-free, it does not wear down like bonded abrasives, reducing dust particles for a cleaner work station..
  • [Industrial Quality] Quality Assured accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear..
  • [Accurate Cutting] Maintains original wheel diameter throughout the life of the blade for better control and precision cutting..
Check Stock

Dremel EZ456, 1 1/2-Inch (38.1 mm) Wheel Diameter, EZ - Lock™ Fiberglass Reinforced Cut-off Wheels, Rotary Tool Cutting Disc for metal cutting, 5 pieces, Medium

  • ✔Widely used: Compatible with electric grinders, electric drills, hanging grinders, etc. The high speed steel saw blade and mandrel set is suitable for fine precision cuts in aluminium, brass, copper, wood and plastic. The diamond cutting wheels are used for cutting gems, glass and ceramics. The reinforced cutoff wheel set is great for cutting and grooving all kinds of metal and fine wood, plastics and ceramics..
  • ✔HSS saw blades: High-speed steel and 6 kinds of outer diameters 22/25/32/35/44/50mm. Suitable for cutting wood, plastic, PVC pipe, etc..
  • ✔Diamond cutting wheels: Made of high-quality diamond. With high cutting efficiency, high durability, stable quality. Suitable for cutting gems, jade, brick, marble, glass, etc..
  • ✔Resin cutting wheels: With low heat generation and thin cutting line, they are used to cut iron, aluminum, chassis modification, thin metal circuit board, and DIY production after connected with mandrels..
  • ✔Easy to install and high quality: These cutting wheel set for rotary tool are easy to install and replace. High working efficiency, perfect cutting effect. Basically replace with handle small cutting wheel. Ideal for DIY enthusiasts..
Check Stock

Shark Industries PN-19 Die Grinder Cut-Off Wheels 2-Inch x 1/32” x 3/8” Shark Type-1 Double-Reinforced Thin Wheels 54 Grit Maximum RPM 30,000 10 Cutting Discs

  • Double Fiberglass Reinforced Cut-Off Wheel – Our cutting wheels have double the reinforcement of less expensive wheels that are made overseas, which....
  • 10-Pack of Wheels – When you purchase our 2-inch cutting wheels 10-pack, you’ll always have plenty of cut-off wheels to finish the job and start....
  • High-Speed Steel Cutter – With a maximum spin speed of 30,000 revolutions per minute, our wheel is made to precisely cut high-tensile materials like....
  • Made in USA Cut-off Wheels – Count on the materials and quality we use in the manufacturing of these USA-made cut-off wheels.
  • Carbon Arrows – Great for cutting custom carbon arrows, for a smooth finish.
Check Stock

Dremel SM510c 3-Inch Metal Cut-Off Wheel, 3-Pack , Black

  • Cutting wheels cut all common residential materials: wood, metal, plastic, and tile.
  • Up to 3/4-Inch Depth of Cut- 3-Inch cutting wheels to power through up to 3/4-Inch oak.
  • 2 Types of Cutting Wheel - Traditional flat wheel and a domed flush cut wheel for door jambs, bevel cuts, and tight places.
  • Innovative Cutting Guides - Cutting guides that help cutting common household materials like 2-Inch by 4-Inch, baseboard, and door/window casing.
Check Stock

SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2" x 3/64" x 7/8" Professional Cutting Stainless Steel, Angle Grinder Cutting Wheel,Cutting Discs with Aggressive Cutting Upgrade (4.5in, 50)

  • ✅50Pack 4.5" x 3/64" x 7/8" Premium Stainless Steel Cutting Discs is operating up to 133,00 RPM and 80M/S..
  • ✅Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
  • ✅Grinder cutting wheels are used in shipbuilding engineering, factory workshops, valve factories, power generation industry, automobile maintenance.
  • ✅ Avoid Wheel Shatter & Injury with lower priced wheels by relying on SALI’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅Grinder wheels adopts 46# raw material sand, so the cutting surface will be more smooth and clear, no damage to the workpiece. Durable cutting wheel does not have debris if it is broken or damaged when in use, it will keep perfectly, ensu....
Check Stock

SALI 100 Pack Cut Off Wheels 3 Inch General Purpose Metal Cutting Wheel for 3 In Angle Grinders and Die Grinders- Cutting Disc Aggressive Cutting 3 x 1/16 x 3/8 Operating Up to 25000 RPM and 80 M/S

  • ✅100 Pack 3" x 1/16" x 3/8"（75 * 1.6* 10） Premium Metal Cutting Discs is operating up to 25000 RPM and 80 M/S.
  • ✅Compatible with Die Grinder, Angle grinders，Air Cut Off Tool and Electric Cut Off Tool Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
  • ✅Grinder cutting wheels are used in shipbuilding engineering, factory workshops, valve factories, power generation industry, automobile maintenance.
  • ✅ Avoid Wheel Shatter & Injury with lower priced wheels by relying on SALI’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅Grinder wheels adopts 46# raw material sand, so the cutting surface will be more smooth and clear, no damage to the workpiece. Durable cutting wheel does not have debris if it is broken or damaged when in use, it will keep perfectly, ensuring your safety..
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)

  • ...e, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
Check Stock

60Pcs Cutting Wheel Set for Rotary Tool, Mini HSS Saw Blades Cutter, Resin Cut Off Wheels Disc, Diamond Cutting Kit with Mandrels for Wood Metal Glass Plastic Stone

  • Widely used. Covers all the bases with quality products at a price any operator can afford. Ideal for cutting, grooving and trimming wood, plastic, ceramics, metal and DIY production. Compatible with electric grinders, electric drills, hanging grinders, etc..
  • Resin cutting wheels: With low heat generation and thin cutting line, they are used to cut iron, aluminum, chassis modification, thin metal circuit board, and DIY production after connected with mandrels..
  • HSS saw blades: High-speed steel and 6 kinds of outer diameters 22/25/32/35/44/50mm. Suitable for cutting wood, plastic, PVC pipe, etc..
  • Diamond cutting wheels: Made of high-quality diamond. With high cutting efficiency, high durability, stable quality. Suitable for cutting gems, jade, brick, marble, glass, etc..
  • Attention: For your safety, please wear gloves and goggles when operating. It may become scorching hot when using diamond cutting wheels. Please add some water to keep it cool..
Check Stock

Cutting Wheel Set 36pcs for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 545 Diamond Cutting Wheels 10psc with 2 Screwdrivers

  • RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
  • HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc..
  • DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass..
  • GREAT TOOL FOR DIY – Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists..
  • 100% SATISFACTION – If you have any problems, simply contact us and we promise an 100% satisfactory solution. You don't need to worry about returns and refunds..
Check Stock