ReviewsCuz D Straight Flush Saw

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock

Jones Stephens S49005 E-Z Stroke Pipe Saw 8” Pipe Saw

  • Hand Saw: This E-Z Stroke Pipe Saw is a convenient, lightweight hand saw with a comfortable ergonomic handle. It can easily be used to cut plastic,....
  • Pull-Stroke Saw: Jones Stephens’ E-Z Stroke Pipe Saw is one of the most convenient and easy-to-use cutting saws. With razor sharp teeth, the....
  • Flexible Blade: The saw features a highly flexible blade that allows for flush cutting without marring adjacent surfaces..
  • Razor Sharp Teeth: The tri-edge ground teeth cut through material like a knife, which makes this saw the go-to for all your cutting needs..
  • Replaceable Blade: If you need a smaller blade or your blade is dull or damaged, the orange handle accepts all Jones Stephens E-Z Stroke Saw blades.....
Check Stock

DC Cargo Mall 8 Pack | D-Ring Tie-Down Anchors (Large Square), Recessed-Pan Fitting D-Rings Heavy Duty Steel Cargo Tie-Downs, Truck/Trailer/Flatbed/Pickup Tie-Down Anchor

  • ✔ HEAVY DUTY: 8 pack | Hardware NOT included. These heavy duty 1-1/2" inner clearance D-rings are made of high quality galvanized steel for rust and corrosion resistance. Assembly break strength of 6,000 pounds and a safe work load limit of 2,000 pounds..
  • ✔ WELL-DESIGNED: The D-ring lies flush in its 4-3/4" x 4-1/2” square recessed-pan fitting so the D-ring doesn’t hazardously protrude from the floor. Weep holes on bottom of the pan ensure that water drains out..
  • ✔ EASY INSTALLATION: Use a hole saw and chisel and bolting hardware - not included. The 1/2” x 1/2” square bolting holes are perfect for securing your anchor with CARRIAGE BOLTS. These can be low floor flush mounted onto wooden trailer floors and other surfaces..
  • ✔ ANCHOR ACTION: Trailering your motorcycle or snowmobile cross-country? Strapping down pallets in a warehouse? Anchoring boats and marinas at the dock? Get ready for some ANCHOR ACTION with these versatile and dependable recessed tie-downs. Easily secure logistic straps, bungee cords, ropes, soft loops and chains..
Check Stock

Hand Book Journal Co Travelogue Drawing Journals 5 1/2 in x 8 1/4 in landscape ivory black [PACK OF 2 ]

  • Aluminum locking mechanism prevents the jab saw blade from being removed during use.
  • The jab saw has an interchangeable handle which holds a standard reciprocating saw blade..
  • The jab saw is ideal for flush-cutting applications or when a hacksaw is not available.
  • The TRI-FOLD jab saw is great for cutting drywall, plaster, wood, plastic and metal.
Check Stock

IRWIN Dovetail Saw 10-Inch 2014450

  • This dovetail saw uses a spring-loaded, reversible blade that can be used for left- or right-cutting.
  • The ProTouch handle on each jamb saw provides ergonomic comfort.
  • A Wide-Body Flush-Cut blade on this dovetail saw measures 50 mm.
Check Stock

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

KingTool 3 in 1 Multi Blade Hand Saw - 12-Inch Solid Frame Hacksaw, 14-Inch Universal Handsaw and 10-Inch Standard Utility Saw

  • KingTool 3 in 1 hand saw including 12-Inch solid frame hacksaw blade, 14-Inch universal handsaw blade and 10-Inch standard utility saw blade, and a shared handle for cutting a plastic, metal, pipe, particle board, and wood..
  • The installation is easy and simple, and the saw blade can be installed in 3 seconds at the fastest. Ergonomically designed bi-material handle for comfort and control..
  • Solid Frame Hacksaw - A 24inch teeth Bi-Metal hack saw blade and a 18 teeth hack saw blade are included in this 3 in 1 saw set. Adjustable flush cuts at 90° and 180° angles.
  • Universal Handsaw - A 14”/355mm 7TPI/8TPI universal handsaw blade is included in this 3 in 1 hand saw set..
  • Standard Utility Saw - A 10”/255mm 7TPI/8TPI standard utility saw blade is included in this 3 in 1 hand saw set.Each saw features Tri-Ground teeth to give you fast, efficient cuts.
Check Stock

Cuz-D Straight Flush Saw - Best Multifunctional Circular Saw and Blade 8-1/2 Inch Worm Drive Undercut Saws for Woodworking 6.5 Amp SFS-85.

  • This Straight Flush Saw was designed for the people that earn a living with their tools. Built to compete, out-perform and out-last. This....
  • Light weight magnesium alloy construction prevents user fatigue during all day use.
  • Trigger actuated lower guard for safe operation.
  • Bevel cutting capability from -5 to 65 degrees with flexible adjustable depth settings.
  • 8 1/2 inch blades with 3-1/8” depth cut and 1-9/16” nose plunge cut capacity to cut larger lumber in a single pass.
Check Stock

DEWALT Track Saw Track, 59-Inch (DWS5022)

  • For perfectly straight cuts in both directions.
  • track saw dual-edged tracks for perfectly straight cuts in both directions.
  • Zero clearance track saw cutting system delivers precise, straight, splinter-free cuts.
Check Stock

Japanese Saw Hand Saw Ryoba Double Edge Pull Saw Interchangeable Flush Cut Saw 10 Inch Flexible Blade Handsaw for Woodworking orange

  • ⚒️ Japanese Saw 22-1/2" Hand Flush Cut Ryoba Pull Saws Flexible Double Edge 10" Blade Impulse Hardened Steel Teeth for Woodworking..
  • ⚒️ The Pull Saw is made of SK5, quenched and tempered good toughness, stronger and more durable.Japanese saws cut materials via pulling, thus they....
  • ⚒️ The japanese razor saw 10" Double Edge Ryoba Hand Saw has a blade length of 10inch and a 12.5 inch Ergonomics TPR handle. In comparison to....
  • ⚒️ A fast, sturdy universal saw - ideal for deep cuts both across and with the grain - in the workshop or building site..
  • ⚒️ One side for ripping, the other for crosscutting, now you only need one saw for all general woodworking tasks..
Check Stock

Hacksaw includes Hacksaw and Reciprocating Blades, Adjustable Tension to 30,000 PSI Klein Tools 702-12

  • Adjustable blade tension up to 30,000 PSI for fast, precise cuts.
  • Includes 12-Inch (305 mm) x 24 TPI bi-metal hack saw blade and 6-Inch (152 mm) x 24 TPI bi-metal reciprocating saw blade.
  • Alternative 45-degree mounting for flush cutting.
  • Front mount for reciprocating saw blades.
Check Stock