ReviewsCv Axle Boot Clamp Tool

OTC 4723 Stinger Ear-Type CV Boot Clamp Plier

  • OTC's Ear Type CV Boot Clamp Pliers are designed to crimp the ear-type CV boot clamps used on most Cars, Trucks, SUV's, Vans and off-road vehicles that use CV boots.
  • May also be used to crimp the type of clamps used on fuel and cooling system hoses.
  • Ensures even, precise crimping for a tight, leak-proof seal.
  • Using the correct tool reduces the possibility of damage to the clamp, boot, or hose.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Check Stock

FEBRYTOLD 12 Pcs CV Boot Clamp 6 Pcs Small and 6 Pcs Large Stainless Steel Universal Adjustable Stainless Steel Drive Shaft CV Boot Clamp

  • 【Material】High-quality non-magnetic Stainless Steel. Solid and Durable..
  • 【Function】Use on Drive / CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • 【Compatible】Adjustable Perimeter(Height): 315-415mm(9mm), 142mm-176mm(7mm)..
  • 【Installation】Good Working Condition and Easy to Install. Placement on Vehicle: Left , Right, Front and Rear..
  • 【Package】6 Pcs Small CV Boot Clamps(Height: 7mm), 6 Pcs Large CV Boot Clamps(Height: 9mm)..
Check Stock

Heavy Duty CV Boot Clamp Pliers Joint Tool Ear-Type Clamp Crimping Removal with a 1/2' Torque Wrench Universal Fit VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles

  • The CV Boot Clamp Pliers Tool is perfect Tool for Ear-Type Clamp Crimping or Removal on VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps..
  • Constructed from heavy-duty steel with comfort grip handles.
  • Perfect fit all ear-type clamps including GM FWD outboard CV joints, also suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems..
  • Equipped a "straight" crimper pliers on the end allows this CV Boot crimping on clamp ears to greatly prevent leakage..
  • Easily crimp the loop and then push down on the crimp to lock into place. 1/2" square holes allow you to use with a 1/2" extension handle or torque wrench..
  • 100% MONEY BACK GUARANTEE. Buy with no risk..
Check Stock

Flexx Boot FB3000 Small Shaft Universal CV Boot

  • Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function.
  • CV Drive Axle part numbers with an “HD” suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and....
  • An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or....
  • CV Drive Axle measurements are validated after assembly to ensure a proper fit.
  • Threads are precision rolled to ensure proper fit when axle nut is....
  • Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
Check Stock

YuangTow Universal Stretch CV Boot Tool Installation Mount Cone for Fitting Boots With A Smooth Surface Cars Accessories Plastic Auto Replacement Parts, 1 PCS, Black, 13.07 x 4.84 4.37 inches

  • ★Function:Universal fit CV boot air tool,Sure makes changing CV boots on 4 wheelers very easy as you don't have to disassemble joint,saves a lot of time when replacing outer CV boots..
  • ★Material:CV removal tool made of high quality steel,rust proof, and strong toughness to ensure durability and reliability.
  • ★Multipurpose:CV boot tool can be used for Vtt,Toyota Corolla,Audi,BMW,saves time and labor easy to use anyone with UTV OR ATV will find this product great..
  • ★Design: Simple one button operation expands the CV boot in seconds to fit the CV joint and can be supplied separately or used with CV dust boot, grease and clamp.
  • ★We are specialized in producing various tools, please go find all kinds of tools fittings you need in LAJIAOZ store .Customer satisfaction is our top priority,if there anything missed or broken,pls let us know,we'll reply within 24 hours.
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Ear Type CV Joint Boot Clamp Plier

  • Performance Tool Ear Type CV Joint Boot Clamp Pliers (W83013).
  • For all ear-type clamps including GM FWD outboard CV joints..
  • Ideal for installing clamps fuel filters.
  • Great for CV joint boots and other cooling system hoses.
  • Heavy duty steel and no-slip grip construction.
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints

  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

2pcs CV Joint Boot Clamp Pliers Set Hose Band Cut-off Pliers Car Banding Tool Kit

  • Material – Pliers constructed from pressed steel with black-coated finish. With non-slip rubber handle, can effectively reduce user fatigue..
  • Advantage – With the help of the built-in cutter and winding mechanism, the strapping can be tightened and cut quickly and effectively..
  • Features – This CV joint plier is easy to use, which is essential to crimp and flatten clamps on ear type CV joint boot clamps..
  • Application – This kind of CV joint clamp is practical and suitable for ear hose clamps on fuel, cooling system and vacuum hoses..
  • Specification – CV joint clamp tool includes a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles..
Check Stock