ReviewsCylinder Block Head Surface

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

【Cylinder Bore】: 47mm / Non-EGR Cylinder.
【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.

Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....

Check Stock

Mophorn 20T 4Inch Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 100mm Hydraulic Lifting Cylinders (20T 4Inch Hollow)

Heavy Duty Jack: Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Paint spraying at the surface, prevent scratching and corrosion..
Large Lifting Capacity: Our ram hydraulic cylinder is designed to provide reliable support during operation. No stuck when lifting, large 20 T/44000 LBS tonnage, enough stroke(100 mm/4 inch)..
Convenient Use: Quick connecting head with dust cover, preventing the jack's inside from dust, features firm connection with no leakage. A portable handle increases flexibility and convenience..
Smooth Surface: The hydraulic ram cylinder features a smooth surface with circle texture, provide reliable support during working..
Wide Usage: This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..

Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....

Check Stock

SP Bel-Art Frigimat Junior Dry Ice Maker; U.S. Model (F38886-0000))

Attach to a liquid CO2 cylinder equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes.
each 50lb. cylinder makes from 10-16 blocks of dry ice.
Dry ice production can be viewed through the transparent polycarbonate body that secures without clamps, screws or tools ensuring easy removal of the solid block of dry ice and disconnection from the CO2 cylinder.
Lightweight body is never as cold as the dry ice, even when filled.
allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow.
Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder.
Read through Instruction Manual (PDF) under Technical Specification before installation.
allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to....

Check Stock

POWERTEC 71227 24 Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.001” Over Full 24” - Professional Finishing Tools

FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others.
FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized.
ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion.
VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless.
SCALE: Straight edge ruler measures out to 24 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system.

Check Stock

POWERTEC 71332 38 Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.003” Over Full 38” - Professional Finishing Tools

FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others.
FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized.
ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion.
VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless.
SCALE: Straight edge ruler measures out to 38 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system.

Check Stock

Threads

【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
Plus package comes with plastic case for safety storage and protection.

Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....

Check Stock

G1/4 Threaded Pneumatic 4 Way 7 Port Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting (Pack of 2)

Operating Temperature: 0 - 60 Degree Celsius.
Air cylinder manifold is the starting points for air cylinder systems. Can be mounted in line or at a take-off point easily with the G1/4 diameter threaded hole design..
It takes one row of air from a pump, air cylinder, compressor, vacuum engine or other such system and splits it into many..

Check Stock

IAP Performance 043101355CK Complete Dual Port Cylinder Head with Sensor Hole for VW Beetle

【Premium Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
【Function】This tool is attached to the cylinder head, used to lift the cylinder head from the engine..
【Application】Suitable for Detroit diesel 60 series engines..
【Easy & Convenient to Use】Remove the cylinder head bolts and install the cylinder head lifter bracket (J–35641–A) using the bolt hole at the inboard center, then attach a suitable lifting hook to the eyelet in the lift bracket, and lifter the cylinder head off the engine..
【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Cylinder Head Lift Bracket, simply return it for a full refund in 30 days..

Check Stock