ReviewsCylinder Bracket

FLE Hair Dryer Holder Wall Mounted Stainless Steel Self Adhesive Blow Dryer Holder Rack for Dyson Supersonic Hair Dryer,White…

  • Perfect Design - The hair dryer wall mount holder is perfect for your dyson hair dryer and its accessories. The Silicone pad on the hair dryer bracket....
  • New Upgrade Dual Use - Size air cylinder bracket punching or self-adhesive two ways to use - Look beautiful and fashionable, perfectly decorates your....
  • Easy To Install - Magnetic placement allows your Dyson hair dryer to be organized in a very convenient way, easy to remove and place.Simple your life....
  • Safe & Sturdy - Just screw the bracket into the wall. It's very solid, you don't have to worry about falling. After refined polishing and wire....
  • Quality Assured - We are always focus on products quality and service. For any questions, please feel free to contact us and we are here ready to help.
Check Stock

Hydraulic Handbrake Drift E-Brake Handle Parking Emergency Brake Lever Universal for Racing Cars Red 8408#

  • Assembled with Steel Bracket i.e. Ensures Less Flex and Higher Actuation to the Master Cylinder..
  • Made of high quality machined aluminum.Universal fit for most car(Fits Drift Racing or Rally Vehicles with Stock Brake Assembly Removed and enough Clear Installation Room as Stated in Dimensions Provided as Above ONLY).
  • Purpose design 3 /4 master cylinder to lock up even large 2 port rear brakes as found on skylines.Allows the rear tires to be fully locked and makes the vehicle slide sideway..
  • different custom heights and styles available for most personal applications..
  • It can for drift car only,can not for original car..
Check Stock

Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket Anodized Aerospace Aluminum Single Slot Cards Support，Safe Without Magnet（Black）

  • ★ LASTING PROTECTING GPU CARD: this GPU support bracket is specially designed to protect and support the graphics card/GPU cards, prevent the....
  • STURDY AND STABLE GPU BRACE SUPPORT: this GPU support bracket made of all aviation aluminum with oxidation treatment, far stronger and last longer....
  • ★ TOOL-FREE INSTALLATION: easy to mount and adjust the height,.Tool-less screws are used for fixing the support module. The support module is....
  • ★MAGNET-FREE DESIGN: There is No maget for the the whole product, which will not hurt your Disk,No impact on the electromagnetic environment of your....
  • ★SLIDING TRACK DESIGN: the GPU support bracket main part is the vertical aluminum cylinder, which works as a track, and it will allow the supporting....
Check Stock

Stratus Precision Rain Gauge with Mounting Bracket (14\ All Weather)

  • QUALITY: The last rain gauge you'll ever need to buy..
  • PRECISE: Accurate to 1/100th of an inch and easy to read. Built to US Weather Bureau standards..
  • EASY TO INSTALL: Install the rain gauge on a post with its exclusive "Quick Connect" bracket, which lets you quickly remove the cylinder for easy measurement or cleaning..
  • RUGGED: Constructed of heavy duty, UV resistant polycarbonate (no metal parts to rust), this high quality rain gauge will stand up to years of rough weather and full sun without fading or corroding. Heat and frost resistant..
  • VERSATILE: The first inch of rain funnels through the 4" diameter top into a specially calibrated measuring tube. Even a light shower registers clearly in increments of 100ths of an inch. Additional rainfall up to a total of 11" is contained in the outer cylinder until measured separately in the calibrated tube..
Check Stock

Ideal Security Pneumatic Lock for Screen Door with Chain, White (1.25-2 Inches)

  • Door Stopper: This air pressure door closer for out-swinging doors is ideal for heavy-duty storm doors that are 1.25-2 inches thick.
  • Adjustable and Easy to Install: This door latch easily screws onto the door and can be installed either at the top, bottom, or in the middle and the wide base jamb bases provide extra strength.
  • Convenient Design: This storm door latch has a cylinder tube which is 1.5 inches in diameter and 10.5 inches in length and has a seasonal adjustment.
  • Smooth Closing: The door closing is adjustable with this pneumatic door closer and can be adjusted with the air screw at the end of the cylinder.
  • Includes: This door security system has a closer, wide-base jamb bracket and wind chain.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

  • Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

INTEKIN Bike U Lock Heavy Duty Bike Lock Bicycle Lock 16mm U Lock for Bicycle Heavy Duty U Lock with 3 Keys for Road Bikes Mountain Bikes

  • ...RDY: This bike u lock is made of 0.63inch(including 0.1inch PVC cover) carbon structural steel which is cutting-resistant, leveraging-resistant. The PVC cover makes u lock can resist corrosion from dust and dirt to prolong the life of your bike lock..
  • NO BLOCKING: The lock cylinder of u lock is made by zinc alloy blade, which has a precise structure to prevent technical opening. With the lock dust cover and cooper lock cylinder, no need to worry about blocking when opening the bicycle lock..
  • LARGER SIZE: The size of the u lock is 12.37*5.63inch. Comes with a mounting bracket that is suitable for all circular tripod in diameter ≤1.18inch. With the portable size, you can put this bike u lock into your bag or mount it on the frame of your bike..
  • EASY INSTALLATION: The mounting bracket holder is easy to install, you can refer to our instructions to install it. This convenient installation enables you to store your bike lock quickly when on a ride. Enjoy your beautiful day like never before!.
  • 3 KEYS: The bike lock comes with 3 keys which are specially designed. This keys of the bicycl....
Check Stock

INTEKIN Bike U Lock Heavy Duty Bike Lock Bicycle Lock 16mm U Lock and 5ft Length Security Cable with Sturdy Mounting Bracket for Bicycle Motorcycle and More Black Small

  • STURDY: This bike u lock is made of 0.63inch(including 0.1inch silicone cover) carbon structural steel which is cutting-resistant, leveraging-resistant. The silicone cover makes u lock can resist corrosion from dust and dirt to prolong the life of your bike lock..
  • NO BLOCKING: The lock cylinder of u lock is made by zinc alloy blade, which has a precise structure to prevent technical opening. With the lock dust cover and zinc alloy lock cylinder, no need to worry about blocking when opening the bicycle lock..
  • CONVENIENT USE: The bike lock comes with a 5feet renforcement steel cable which is coated with PVC covering, and the whole diameter of it is 0.47inch. With the cable, it will provide your bike with greater locking flexibility and better protection..
  • LARGER SIZE: After receiving customer feedbacks about u lock, NOW WITH LARGER SIZE 8.3*5.7inch bike u lock specially designed for most bikes. Besides, comes with a mounting bracket that is suitable for all circular tripod in diameter ≤1.18inch..
  • EASY INSTALLATION: The mounting bracket holder is easy to install, you can refer to our instructions to install it. This convenient installation enables you to store your bike lock quickly when on a ride. Enjoy your beautiful day like never before!.
Check Stock

Kyostar Black Racing E-Brake Hydraulic Drift Hydro E-Brake E Brake Racing Handbrake Long Arm Lever Park Brake

  • Assembled with Steel Bracket i.e. Ensures Less Flex and Higher Actuation to the Master Cylinder..
  • Made of high quality machined aluminum.Universal fit for most car(Fits Drift Racing or Rally Vehicles with Stock Brake Assembly Removed and enough Clear Installation Room as Stated in Dimensions Provided as Above ONLY).
  • Purpose design 3 /4 master cylinder to lock up even large 2 port rear brakes as found on skylines.Allows the rear tires to be fully locked and makes the vehicle slide sideway..
  • different custom heights and styles available for most personal applications..
  • It can for drift car only，can't for original car..
Check Stock

Amerex B500 Fire Extinguisher

  • Rugged construction 6 year warranty Stored pressure design Dependable drawn steel cylinder Durable high gloss polyester powder paint All metal valve construction Temperature range -65°F to 120°F User friendly Easy and more economical to maintain and service Large loop pull pin Bar coded and bi-lingual labels USCG Approved with Bracket Listed on UL Label Light to medium duty anodized aluminum valve body.
Check Stock