ReviewsCylinder Gauges

Performance Tool W89729 Leak-Down Test Kit Not a compression Tester black

  • Pressure regulated manifold and quick couplers.
  • 12 millimeter and 14 millimeter thread adapters.
  • Helps identify causes of low cylinder compression of internal engine problems such as bad rings valves and leaking head gaskets.
  • Dual 2-1/2 inch gauges with protective outer shell.
Check Stock

Lang Tools TU-15 Diesel Compression Tester

  • OTC's Cylinder Leakage Tester Kit quickly diagnoses internal engine problems like bad rings, valves, and leaking head gaskets and comes complete with....
  • Dual 2-1/2 inch gauges read 0-100 psi and 0-700 kPa and feature chrome bezels and rugged protective outer boots.
  • Kit features a pressure regulated manifold with quick couplers, 24 inch long 14mm flex hose, and 10 mm, 12 mm, and 18 mm thread adapters.
  • Rugged, blow molded storage case with removable lid keeps components organized and protected when not in use.
Check Stock

OTC 5609 Cylinder Leakage Tester Kit , black

  • OTC's Cylinder Leakage Tester Kit quickly diagnoses internal engine problems like bad rings, valves, and leaking head gaskets and comes complete with adapters for most applications.
  • Dual 2-1/2 inch gauges read 0-100 psi and 0-700 kPa and feature chrome bezels and rugged protective outer boots.
  • Kit features a pressure regulated manifold with quick couplers, 24 inch long 14mm flex hose, and 10 mm, 12 mm, and 18 mm thread adapters.
  • Rugged, blow molded storage case with removable lid keeps components organized and protected when not in use.
Check Stock

Prokomon Cylinder Leak Down Tester,Gasoline Engine Cylinder Dual Gauge Leakdown Compression Tester kit with 10 12 14mm Spark Plugs on Car Truck Motorcycle

  • ◇ Cylinder Leak Down Tester : The set is designed to detect a variety of common engine faults (Including: worn piston rings, worn valves, cracks in....
  • ◇ Working Principle : Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed into that particular....
  • ◇ Dual Pressure Gauges : The pressure gauge with scale range 0-100psi/0-7bar, and the leakage gauge with color coded range marked with HIGH MODERATE....
  • ◇ Package Contents : 480mm flexi hose, 10mm and 12mm spark plug adapters, fixed short connector M14（14mm Brass Coated Aluminum Adapter） x 26mm,....
  • ◇ Prokomon : Please unscrew the adapter after the cylinder is cooled to prevent the hose from softening and not driving the adapter to rotate....
Check Stock

JTC Tools 24 INCH Engine Block Straight Edge S50C High-Carbon Steel by JTC 1010

  • *Dimension 36mm height and 600 mm length. Convenient hanging hole and edge protector. *Use with feeler gauges to check distortion in engine blocks, cylinder heads and flywheels..
  • Best Quality,Fastest Shipping,Local Service Support.
Check Stock

Uniweld RHP800 Nitrogen Regulator with 0-800 psi Delivery Pressure 2

  • Nitrogen Regulator, Delivery Pressure 0-800 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Baileigh 50-Inch Sheet Metal Finger Brake (BB-5014F)

  • MAKE BOXES AND PANS: Bends 14-gauge mild steel (18-gauge stainless steel) up to 135° across entire 50" length..
  • MAINTAINS ACCURACY: Fully-welded steel framework prevents deformation when bending at full capacity..
  • BLADE GAP ADJUSTMENT: Lets you to take on various gauges of sheet metal..
  • ASSISTED LIFTING: Spring-loaded cylinder helps lift the apron, especially helpful when you’re bending at full capacity..
  • FOOT-CONTROLLED CLAMP: Leaves your hands free to position the sheet metal before clamping in place..
  • CREATE DIFFERENT SIZES: Includes 12 fingers of varying widths that you can easily rearrange..
Check Stock

Taprite Primary Keg Brass Beer Regulator With Commercial Pressure Gauge (Dual Gauge 742HPN)

  • Use this regulator on any High Pressure Tank with a CGA-580 valve..
  • Nitrogen tanks have a female thread (CGA-580), these regulators have a male thread..
  • Double Gauge Regulators Measure PSI, as well as the Volume of Nitrogen in the Cylinder..
  • This regulator has a duck-bill check valve which prevents back flow of liquid into the regulator..
  • 1P1P, CGA580 Inlet, 5/16″ Barb Shutoff w/Duckbill Check, 60lb & 3000lb gauges.
Check Stock

10 lb Co2 Carbon Dioxide Cylinder with High Flow Co2 Regulator and Protective Carry Handle, Inflating Off Road Tires

  • 10 lb Aluminum Cylinder, Powder Coat Black.
  • Protective Valve and Regulator Carry Handle.
  • High Flow Adjustable 250 PSI Carbon Dioxide Regulator.
  • 45CFM (Cubic Feet Per Minute) Non Freeze Clogging Under High Demand.
  • CGA320 Tank Connection, Quick Connect Outlet, Dual Gauges.
Check Stock

YSTOOL Cylinder Leak Down Tester Automotive Kit Gasoline Engine Compression Dual Gauge Leakdown Detector Tool Set for Pressure Check & Leakage Rate Test with Extension Rod Red

  • The multi-piece cylinder leak down tester kit adds 6 new partners to offer you more options and a better repair experience. On the basis of a common set(1PC double gauge maniflod, 1PC rubber hose and 2PCS metal adapters included), this 3-in-1 cylinder gauge diagnostic tool kit adds 2PCS universal push-on connectors, 2PCS threaded adapters, 1PC M14 extension rod, and 1PC extension hose. It is a must have for any DIYer or professional mechanic's tool collection..
  • Convenient dual gauge design allows the compression gauge tool to test the pressure and leak rate of the cylinder under test at the same time. Ranging from 0-100 psi / 0-7 bar and 0-100%(Accuracy: ±0.5%), easy to read 3-inch gauges would spend less time on readings. Leakdown gauge tool hooks up to air compressor(prepare by yourself) can help to detect common engine faults such as worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets..
  • Gauge manifold assembly also equipped with 18" rubber hose, AR2000 pressure regulating valve, American type air plug and aluminum manifold body. Valve knob is made of alloy and plastic, used for pressure adjustment of the inputed air from the air compressor. Pull out for use, and push back to lock. This leak down compression tester & cyli....
Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock