ReviewsCylinder Line Boring

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

ZUQIEE Paint Thickness Tester, 0.0mm~2.0mm, 0mil~80mil Mini Paint Thickness Tester LCD Digital Display Car Coating Gauge Meter Mesuring Instrument for Fe/NFe with Measuring

  • Single line and double cylinder,synchroized operation,auto at timing point..
  • The cylinder adopts high quality hyaline organic glass..
  • LCD for the instrument, displaying the preset value and real-time value through time division..
  • The parameters like number of turns and rotating speed can be preset arbitrarily, which provides multiple choices for the experiment..
  • Intelligently control two performance parameters like the rotating speed of cylinder and revolutions..
Check Stock

AMYSPORTS Lead Shot Fishing Weights Tackle Drop Saltwater Weight Sinker Fishing Lead Drop Fishing Sinker Shot Cylinder Removable 25pcs 3/8oz

  • AMYSPORTS Fishing Weights Sinkers: The fishing sinkers weights are designed for your fishing activities, heavy enough for drop shot, cylinder shaped....
  • Drop Shot Weights Fishing: Use these drop shot weights in the stream,they works properly even in the heavier flow and get baits down.Connect the line....
  • Cylinder Shaped Smooth Surface: The cylinder fishing sinkers weights work perfectly in the area where are surrounded by rocks and weeds.The lead....
  • Upgraded Effective Fishing Sinkers: The fishing sinkers weights will be corrosion resistance and be suitable for both saltwater and freshwater and not....
  • Multi Sizes Wide Application: The variety sizes of these lead sinker would satisfy your various usages.The length is different from 1.36 inch to 2.1....
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • Heavy duty CGA-320 beer keg co2 regulator, no leaks: upgraded brewing beer kegerator pressure regulator features a heavy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
  • Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
  • Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. tu....
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

Husqvarna 522L Gas String Trimmer

  • Hard chromium plated cylinder bore provides increased durability and extended product life.
  • Bevel gear designed with high torque and the cutting equipment parallel to the ground for best cutting performance.
  • Stop switch automatically resets to the ON position for easier starting.
  • Heavy duty twin line cutting system with Tap 'n Go for quick line feed.
  • Starting a cold engine is easier with the intuitive choke which is easy to reach and set.
Check Stock

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

Auliuakz Boring Bar Set,9pcs HSS Material 1/2 inches Round Shank Boring Bar Set Machine Tool Accessories

  • Boring Bar Set:Made of high quality HSS material, high hardness, wear resistance and heat resistance..
  • Boring Bar Set:9 kinds of boring bar of different lengths to meet your different needs..
  • Boring Bar Set:Boring bar can be used on boring machine, lathe or milling machine..
  • Boring Bar Set:Excellent workmanship to ensure high accuracy..
  • Boring Bar Set:The handle of boring bar is thicker, more durable..
Check Stock

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

  • SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
  • QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

Pneumatic Can Crusher Heavy Duty Pneumatic Cylinder Aluminum Can Crusher for Recycling Soda Beer Cans Recycling Tool

  • 【Premium Material】The main body of the can crusher made of high-quality iron is very durable. The cylinder is made of high-quality aluminum alloy, with good cooling performance. The frame adopts plastic spraying process, which is wear-resistant and corrosion resistant..
  • 【Recycled】Tank compressor can put the used tank into the recycling box for reuse, which is in line with the environmental awareness of resource conservation and recycling, and is an essential small tool for families..
  • 【Labor Saving】Cylinder can crusher is powered by an air pump, and can be easily broken by pressing and rotating the button. It is simple to operate, labor-saving and efficient, and is suitable for families, recycling stations, etc..
  • 【Space Saving】The volume of the crushed tank is less than 20%, greatly reducing the volume of the tank and saving a lot of storage space..
  • 【Widely Used】Pneumatic can crusher can be used for cans with a capacity of less than 16.90 ounces, so this cylinder can crusher is suitable for most cans on the market..
Check Stock