ReviewsCylinder Manufacture

Wall-Mounted Bracket Single Wall Bracket for Compressed Gas Cylinders Holder (Red)

gas tank holder made of ABS plastic，solid construction offers safe & secure use.
gas cylinder rack simple design is easy to install, cylinder tank brackets suitable for hospital/laboratory/factory etc.
cylinder strap secures cylinder to bracket，prevent cylinders from falling or moving.
compressed gas tank fixed frame holder suitable for 40L cylinder gas tank.
gas cylinder strap long100cm/39.37inch；steel cylinder stand Approximate size.

Check Stock

BTS GQ KOREA 2022 January BTS Coverman GQ_Group

Direct replacement parts. This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder....
It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air....
This K-0650 is the most current direct replacement part and has the newest style D25837 coated cylinder sleeve..
The K-0650 approximate cylinder dimensions are as follows: Inside Diameter:2.365" Outside Diameter:2.495" Outside Shoulder:2.945" Total Height:1.980".
Please check the compatibility before ordering.

Check Stock

Koyal Wholesale Cylinder Metal Vase Set of 3 Rose Gold Metal Cylinder Candle Holders Copper

INDUSTRIAL DECOR INSPIRED. Bulk set of 3 vases in different heights, great alternative to glass cylinder vases..
DECOR IDEAS: Excellent metal cylinder candle holders for pillar candles or floating candles.
SIZE DIMENSIONS: Each cylinder has 3.5 inch diameter and includes 1 cylinder vase 6 inch height, 1 cylinder vase 7 inch height and 1 cylinder vase....
MULFUNCTIONAL: Perfect for metal cylinder vase centerpieces with flowers, office holders, kitchen holders..
EASY TO USE: For decor use only. Not recommended for food use, not food safe. Easy care simply wipe clean with soft cloth..

Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....

Check Stock

MOOSUN Cylinder Piston Gasket Top End Kit Fits 1988-2006 Yamaha Blaster 200 YFS200

【BLASTER 200 CYLINDER TOP END KIT】Compatible with 1988-2006 Yamaha Blaster 200 YFS 200.
【SPECIAL FUNCTION】MOOSUN Blaster 200 Cylinder replacement piston sets engineered from premium materials to provide exceptional service life and....
【BLASTER 200 CYLINDER HEAD PISTON FEATURE】Cylinder piston set is the heart of engine. MOOSUN Cylinder has been factory honed and deburred to help....
【PART NUMBER】2XJ-11111-00-00, 2XJ-11311-02-00,2XJ-11181-00-00, 2XJ-11631-01-97, 3JM-11351-02-00, 3JM-13621-00-00, B8E-S0000-00-00,....
【CYLINDER PISTON RING GASKET KIT COMES WITH】1 x Cylinder, 1 x Piston, 1 x Piston Rings, 1 x Wristpin, 2 x Circlips, 1 x Needle Bearing, 1 x Head....

Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....

Check Stock

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.

Check Stock

Cylinder Top End Rebuild Kit for 1988-2006 Blaster 200 YFS 200 Engine Piston Gasket Kit

【Blaster 200 Cylinder Top End Kit】Fit for 1988-2006 Yamaha Blaster 200 YFS 200.
【Function】Blaster 200 Cylinder replacement piston sets engineered from premium materials to provide exceptional service life and reliability.....
【Blaster 200 Cylinder Head Piston Feature】Cylinder piston set is the heart of engine. OBUYTO Cylinder has been factory honed and deburred to help....
【Part Number】2XJ-11111-00-00, 2XJ-11311-02-00,2XJ-11181-00-00, 2XJ-11631-01-97, 3JM-11351-02-00, 3JM-13621-00-00, B8E-S0000-00-00,....
【Cylinder Piston Ring Gasket Kit Comes With】1 x Cylinder, 1 x Piston, 1 x Piston Rings, 1 x Wristpin, 2 x Circlips, 1 x Needle Bearing, 1 x Head....

Check Stock

WINMAX TOOLS AUTOMOTIVE Generic Tu-21 Cylinder Leakage Leakdown Leak Detector Engine Compression Tester Gauges

Designed to detect a variety of common engine faults including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets..
Available with either single gauge or twin gauge manifold. Gauge(s) show % of cylinder leakage or cylinder leakage and cylinder pressure..
Suitable for use on any petrol engine with 12 and 14mm spark plugs..
TU-21 Cylinder Leak Detector Tester checks the amount of leakage in an engine cylinder & helps determine the source. Best used when comparing a....
Pinpoint the source of compression problems by doing cylinder leak-down tests Works with domestic and import engines Input and leakage gauges with....

Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

[INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
[Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
[Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
[Size Information] Outer Cylinder : 2 inches.
The height of fully expanded: 16.9 inches.
The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
[One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..

Check Stock

VINLUZ Bathroom Vanity Light 5 Light Brushed Nickel Wall Sconce Lighting Fixture with Clear Glass Shade Contemporary Wall Light for Cabinet Dressing Room

Unique Design:This elegantly designed and simple vanity lamp brings a modern style to your bathroom. Metal brushed nickel finishes are used in conjunction with clear cylinder glass, which can be used for various home decorations..
Widely applicable:Lights with glass shadows can be installed up or down to illuminate every corner of the room.Suitable for bathrooms, bedrooms, Cabinet,corridors, entryways, kitchen, restaurant, dining room,Dressing Room,etc..
Easy Installation: All mounting hardware required for installation are included in the package. Just need to follow the illustrated instructions provided for assembly and installation..
Bulb Type:Use any E26 base bulbs ( Max 60W for each bulb). Bulb is not included, need to purchase it separately. Compatible with all edison bulbs, LED, CFL, incandescent lamps. It can be dimmed with dimmable bulbs and compatible dimmer switches..
Our services:If there are missing parts or broken glass in the package,we can provide replacement products. As long as you have any questions about this fixture, you could click on“Vinny Home”and then click on "Ask a question" to contact us the original manufacture quickly..

Check Stock