ReviewsCylinder Pressure Relief Valve

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
Also known as a "Pop Off" or "Blow Off" valve..
This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
Features a silicone rubber soft seat relief valve to prevent leaks.

Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
Kit Includes PPE Viton O-Ring 1137073001.

Check Stock

DA YUAN 14 pcs Automotive Cooling System Radiator Pressure Tester Kit

Aluminum adapters for use with most cars trucks.
Kit includes hand pump to 35 PSI, 12 Aluminum Radiator Adapters, Thermometer, Form Fitted Case.
Tester helps detect internal and external leaks..
Perfect for head gasket failure detection (which side of block or which cylinder leaks) ..
Thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..

Check Stock

Watts Tankless Water Heater Service Valve Kit

TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..

Check Stock

Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4-Inch Male Flare Outlet Connection, Heavy-Duty Handle, Self-reseating Relief Valve, Nitrogen Regulator Hvac, Helium Regulator, by NAKAO

➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure..
➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation.
➤Structure: Nitrogen Regulator 0-600PSI CGA580 Inlet, Solid brass, Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system),Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
➤Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.

Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..

Check Stock

Rolair AB5PLUS 1 Gallon 0.5 HP 90 PSI Ultra Quiet Lightweight Portable Pump Electric Air Compressor

POWERFUL & EFFICIENT: Rolair single-stage oil-less air compressor is quiet, powerful, and efficient.
CAST ALUMINUM: Cast aluminum dual cylinder pump holds 1 gallon of compressed air.
LOW AMP DRAW: 0.5 horsepower 1,700 RPM motor runs on just 2.8 amps.
LIGHTWEIGHT: Lightweight and portable with a braided discharge hose and power cord for easy use.
ADD-ONS: Features air-line regulator, start/stop pressure switch, and pressure-relief valve.

Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..

Check Stock

8 Quart DC 12V Hydraulic Pump Power Supply Unit Pack Double Acting Dump Trailer Fit for Lift Unloading

Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
Double Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Double-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..

Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

Nitrogen Regulator, Delivery Pressure 0-400 PSI.
CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).

Check Stock

Uniweld RHP500 Nitrogen Regulator with 0-500 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

Nitrogen Regulator, Delivery Pressure 0-500 PSI.
CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).

Check Stock