ReviewsCylinder Valve Sealing Washer

Tuimiyisou Scuba Diving Tank Valve 250BAR Underwater Gas Cylinder Valve for Underwater Sports Activities Surf&Diving-Swimming&Diving Gloves

  • The Diving Cylinder Valve has a special design which allows for easy and comfortable cylinder handling.
  • Our Tank Valve is made of chrome-plated brasswhich is durable for long term use and it can provide a longer service life and a lower replacement frequency.
  • This Underwater Cylinder Valve will let you know more about the fun of diving and you will have more interest in it.
  • This Diving Tank Valve is engineered with high flow characteristics to maximize regulator performance.
  • The Cylinder Valve has positive hand wheel grip for easy identification of on/off direction.
Check Stock

Donepart Compatible for Valve Cover Gasket with Grommets for M54 E46 E39 E83 E53 325i 330i 325Ci 323Ci 323i 325xi 328Ci 328i 330Ci 330xi 525i 528i 530i X5 Z3 2002-2006

  • [COMPATIBILITY] Valve cover gasket for 2002-2006 BMW 325Ci, 2002-2005 BMW 325i, 2003-2005 BMW 325xi, 2002-2006 BMW 330Ci, 2002-2005 BMW 330i, 2002-2005 BMW 330xi, 2002-2005 BMW 525i, 2002-2005 BMW 530i, 2004-2006 BMW X3, 2002-2006 BMW X5, 2003-2005 Z4.
  • [INTERCHANGE PART NUMBER]11121437395,11120030496,11121726537.
  • [HIGH PERFORMANCE] Advanced manufacturing technology ensures the valve cover gasket firmly seal the valve cover to prevent oil leakage every time the oil enters the vent opening of the cylinder head, and also prevent other harmful substances from entering the valve system..
  • [SPECS] The valve cover gaskets meet specific OEM needs and provide superior sealing performance and durability needed to withstand the unique characteristics of the application.
  • [NOTE] The tightness of the installation of the gasket set must be just right, not too tight or too loose. Either of these two conditions can damage the efficiency of the gasket and may damage the valve cover..
Check Stock

BOSCH 00631200 Dishwasher Drain Pump Genuine Original Equipment Manufacturer OEM Part

  • The Bosch 00422244 Cold Water Inlet Valve is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement BoschWasher Cold Water Inlet Valve controls the cold water flow into the washer.
  • Bosch 00422244 Washer Cold Water Inlet Valve may require replacement if the water valve is restricted and the washer does not fill or fills slowly.
  • High quality Bosch OEM 00422244 Washer Cold Water Inlet Valve works with Bosch branded appliances.
  • Repair your appliance with confidence when you choose Genuine Bosch Factory Certified Parts & Accessories.
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, High Pressure Power Washer Shut Off Valve Stainless Steel 3/8” Female NPT 5000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Stainless Steel Ball Valve for pressure washer guns. 5000 PSI Max Pressure rating. Max Temp 250 degrees Fahrenheit..
  • STAINLESS STEEL - Ball valve pressure washer made from stainless steel, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female NPT Inlet x 3/8" Female NPT Outlet..
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

New 60 cu ft Aluminum Argon Cylinder with CGA580 Valve

  • New, high-quality 20 cf steel helium cylinder with CGA580 valve.
  • 5.24" diameter and 14.76" height (Cylinder).
  • Heavy-duty brass constructed helium balloon inflation valve.
  • Inflation valve complete with regulator and gauge.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • ...bility to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
  • Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness withou....
Check Stock

GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike

  • intake valve mounting hole distance:45mm/1.77".
  • Exhaust valve mounting hole distance:45mm/1.77".
  • Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
  • Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • 52.4mm LIFAN 110CC 125cc Cylinder Engine.
  • Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
  • High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
Check Stock

Valve Cover with Gaskets - Compatible with 1999-2010 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace 12570427 264-965

  • REPLACEMENT DRIVER SIDE VALVE COVER - TOP quality Engine Valve Cover, designed to protect the cylinder head, and its components, along with sealing oil flow. Our direct replacement engine valve covers are made to last. They're durable in design and provide a tight, lasting seal against oil leaks. Additionally, to ensure a longer service life..
  • FIT THE FOLLOWING VEHICLE - Compatible with 1999-2010 Chevy GMC Cadillac Buick Vehicles with 4.8L 5.3L 5.7L 6.0L 6.3L V8 engien. Including Chevy Silverado 1500 2500 3500, Suburban 1500 2500, Express 1500 2500 3500, Tahoe, Avalanche 1500 2500, Trailblazer, Camaro, Corvette, SSR, GMC Sierra 1500 2500 3500, Yukon, Savana 1500 2500 3500, Envoy, Cadillac Escalade, CTS, Buick Rainier, Pontiac GTO, Firebird..
  • REPLACE PART # - Replace GM 12570427, Dorman 264-965. Commonly found on 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 4.8L 5.3L 5.7L 6.0L 6.2L Vortec V8 engines, including Chevy, GMC, Cadillac, Buick, Pontiac, Hummer..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or ACDelco valve cover, but it works even better and lasts longer. Save yourself times and money by replacing valve cover yourself..
Check Stock

5220FR2006H Washing Machine Water Inlet Valve For Hot Water by Beaquicy - Replacement for L-G Ken-more Sears Washers - Washer Hot Water Inlet Valve for 1 Pack Set

  • ✅ 【PRODUCT SPECIFICATIONS】 --- 5220FR2006H Washing Machine Water Inlet Valve for Hot Water controls the water flow into the washer. Package....
  • ✅【90 DAYS WARRANTY】--- 5220FR2006H Washer Water Inlet Valve for Hot Water supports supports 90 days return and exchange.Our company attaches....
  • ✅【EASY TO INSTALL】--- 5220FR2006H Washing Machine Water Inlet Valve for Hot Water is very simple to install and only took about 20-30....
  • ✅ 【COMPATIBILITY】--- 5220FR2006H Washer Water Inlet Valve for Hot is made to fit for L-G, Ken-more sears brand. Washer Water Inlet Valve For Hot....
  • ✅ 【FIXES SYMPTOMS】---5220FR2006H Washing Machine Water Inlet Valve for Hot Water fixes the following washer symptoms:1) Will not drain.
Check Stock