ReviewsD sub Crimp Tool

AMZCNC Copper Tube Fittings Crimping Tool Copper Pipe Crimper Press with 1/2,3/4 and 1 inch Jaw for ProPress Copper Fitting-Manufactured Plumbing, Pipe Press Copper Crimp Tool

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, etc.
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

IDEAL Industries, Inc. 30-495 FT-45 Feed-Thru Modular Plug Crimp Tool for CAT5e, CAT6, CAT6A RJ-45 Connectors, 5 1/2', 1 Crimper

  • MODULAR PLUG CRIMP TOOL: FT-45 is a simple, compact and highly effective modular plug crimp tool for installers and techs to terminate RJ-45 connectors on to CAT5e, CAT6 or CAT6A twisted pair cable..
  • COMPATIBILITY: This tool works with both IDEAL Feed-Thru Modular plugs and standard modular plugs. Feed-Thru plugs allow the individual conductors to "feed-thru" the end-face of the connector and to verify the wires prior to crimping connector..
  • PRECISE TERMINATION: During crimping, the FT-45 crimp tool cleanly shears the excess conductors and leaves a smooth finish at the end face of the Feed-Thru connector. This minimizes accidental shorting of conductors or inadvertent contact in plug jacks..
  • VERSATILITY: FT-45 is designed to crimp IDEAL Feed-Thru, standard and shielded RJ-45 connectors for CAT5e, CAT6 and CAT6A cables. It is compatible with many non-IDEAL connectors as well. One tool covers current and future twisted pair applications..
  • SPECIFICATIONS: This patented tool requires only 1/3 to 1/2 the hand force as compared to traditional tools to crimp the connector. The crimping tool is 5 ½ in long and weighs approx. 1/2lb. It easily fits in your pocket and lightens the tool bag load..
Check Stock

Swpeet 14Pcs Professional Crimping Tool Kit, Ratcheting Wire Terminal Crimper Tool Kit with 1Pcs Cable Stripper and 10pcs 50 Ohm BNC Crimp Male / Straight Connectors for Coax Connectors

  • ☎ Crimping Tool: This tool is High quality professional crimping pliers tool, Heavy duty ratchet crimp tool, Die with .0255, Removable die, Quality handle for better control, Brand new heavy duty ratchet crimping tool for coax connectors with cable size RG-58, 59, 141, 142, LMR195, LMR240, 8/x..
  • ☎ Cable Stripper: Double blades, coax cable stripper, Fully adjustable and replaceable blades, Removes 4, 6, 8 and 12mm Insulation (Adjustable), Use easily, lock the tool over the cable, spin clockwise, then pull off the unwanted portion..
  • ☎ Crimp Male Connector: Brass (Not Alloy) material ensure higher signal transmission and connectivity, Adapter with nickel plated for durability and repeated disconnects Cable mount BNC male connector perfect Works with coaxial cable such as RG58, RG142, LMR195. Impedance:50 Ohm..
  • ☎ Crimp Straight Connector: Product Series: PL-259 cable mount RF connector Connector material is Brass (Not Alloy) ensure higher signal transmission and connectivity, Body Plating is Nickel. Contact Termination:Solder, Impedance:50 Ohm, Frequency Range:DC 0-2.5GHz..
  • ☎ Great Value: In this kit, You will not only get Professional Crimping Tool, But also you will get 1Pcs Wire Stripper and 5Pcs Crimp Male Connectors and 5Pcs Crimp Straight Con....
Check Stock

Morris 10817 Terminal Kit with Controlled Cycle Crimp Tool, 200-Piece

  • 200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need..
  • 22-10 Awg Ergonomic Controlled Cycle Crimp Tool.
  • Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects.
  • Terminals and Disconnects are cULus Listed.
Check Stock

IWISS Pex Crimping Tool 1/2-inch & 3/4-inch Copper Ring Heavy Duty Dual Size c/w Go/No-Go Gauge Meets ASTM F1807

  • Capability: IWS-1234P PEX Crimp Tool Kit works with 2 sizes of PEX tubing-1/2-inch and....
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp s....
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate t....
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for cor....
  • Innovation: Tool includes a gadget helps to reshape the deformed 3/4” rings and cinch rings a little bit smaller to avoid rings from slipping off....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

IWISS Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP TYCO Deutsch Terminals Crimper, Molex Crimping Tool,24-14 AWG

  • Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

HKS Spark Plug Connector Crimping Tool For Ignition Cable and Spark Plug Wire – Ratcheting Wire Crimpers – Max Diameter 8.5mm – Ratchet Terminal Crimper – Electrical Crimping Tool

  • Professional Crimper – This crimper features an efficient ratchet mechanism and finish-machined crimp die for a solid crimp. This crimping tool fits perfectly with spark plug terminals with a diameter of 8-8.5mm..
  • Precise Mechanics – The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp..
  • Adjustable Crimp Force – The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position..
  • Ergonomic Handles – Ergonomic, cushioned, non-slip handles are designed to ensure a strong grip in all situations..
  • Crimp & Strip 2 in 1 – Suitable for single & dual spark plug crimp terminals.The crimper fits for the spark plug wire diameter of 8.5mm..
Check Stock

Glarks 3Pcs Automotive Wiring Harness Terminals Plug Crimping Tool DR-1 Crimper Plier Tool with Wire Stripper and Cutter for Molex Style Delphi Amy Tyco Terminals Crimper Open Barrel 24-14 AWG

  • Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack....
  • Stamped Terminal Crimping Tool: Crimps a wide variety of open barrel contacts, including D-subminiature in small size wire ranges. Crimps conductor....
  • Two Step Crimping: Designed to crimp the core and insulation wings in a separate motion. Tool must be closed twice to complete termination.Has three....
  • Suits for: Weather-Pack, Metri-Pack 150 Sealed, Metri-Pack 150 Unsealed, Metri-Pack 280 Sealed, Metri-Pack 280 Unsealed..
  • Applications: IWC-1424B allows the automotive DIYer to install weather-tight connectors with tools that were previously only available to the....
Check Stock

IWISS IWC-1424A Crimping Tools for Deutsch DT Series Stamped & Formed Contact, Open Barrel Terminal Crimping Tool, AWG14 to AWG24 Wire Crimper

  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: IWC-1424A is also designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWC-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (1, 1/2\)

  • This Pex crimping tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"..
  • Our Pex crimp tool/Plumbing tools/Pex cutter/Hose clamp tool has perfect polishing provides no damage during crimping and avoids leaking..
  • It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The pex fittings pipe tool is factory-adjusted with no requirement for calibration tool..
  • This is a 5 in 1 pex pipe tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the pex tool is needed to switch sizes..
  • Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag..
Check Stock