ReviewsDamascus Blank

ColdLand |8.25" Hand Forged Damascus Steel Blank Blade with Bolster for Knife Making Supplies NB23

You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care)..
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle (you don’t need to use all holes to make a knife). TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes..
DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife from a blank blade”..
We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. Wash your knife and apply a thin layer of oil on your blade/knife after each use. For long term storage.

Check Stock

9' Long Dao Blade, Hand Forged Ladder Pattern Damascus Steel Blank Blade, 4.5' Long Blade with 4' Cutting Edge, 4.5' Finger Serrated Scale with 5 pin Holes

9" long Damascus steel Dao blade blank blade knife,.
Hand forged ladder pattern Damascus steel blank blade.
4.5" long full tang blade with 4" cutting edge.
4.5" finger serrated scale with 5 pin holes for extra strength of scale.
Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..

Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

Overall 10 inches Long hand forged full tang Damascus steel blank blade.
5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
4.5" long Scale space with 3 Pin holes for extra strength of scale..
Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.

Check Stock

EJOY OUTDOORS Damascus Hunting Knife Blank With USA Embroidered Flag Patch | Hand Forged Steel Blank Blade | 7 Inches Handmade Camping Knife Making Supplies | HUNT 02

【】: Damascus steel knife blade blanks are characterized by hardness and a watered, streaked appearance caused by the varying carbon levels of the original material. Knife blanks for knife making can be used as a survival hunting knives, fishing and camping knife. A high quality embroidered USA flag patch is also included. It can be stitched or ironed as per your choice..
【】: Total Length: 7.1"" (approx.) | Blade Length: 3.43"" (approx.) | Handle length: 3.38"" (approx.) | Thickness: 0.14 inch (approx.) *For other sizes and styles visit our store*.
【】: Damaascus knife blanks are very sharp. However, our stainless damascus knife can be sharped more according to desired level. Sharp edge of long lasting skinning damascus deer knife would be ideal for real hunt experience and easily used as pocket knife.
【】: Damascus steel pocket knife has high-quality and is portable. This damascus knife blank is coupled with compact size and weight to be easily used in outdoor sports, survival, bushcraft activities and tracking.
【- 】: Say goodbye to rusty dull knife. This camping damascus blade blanks full tang has razor-sharp blade. It is used for wood cutting, predator hunting and all can be done smoothly in a quick hand move. It can also be use....

Check Stock

ColdLand Knives Lot of 3 Damascus Blank Blades Hand Forged for Knife Making Supplies LOT3N002

NOTE: These stock photos. You will receive 3 different Damascus Blank Blades. We'll ship 3 randomly which are not even shown in the photos..
You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
Hand forged by using 1095 & 15N20 steels..
Money back guarantee. Just message us in case of any issue and we'll take great care of you..

Check Stock

ColdLand |11.25" Hand Forged Damascus Steel Blank Blade for Tactical Combat Survival Camping Outdoor Bushcraft Hunting Knife Making Supplies NB04

You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care)..
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle (you don’t need to use all holes to make a knife). TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes..
DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife from a blank blade”..
We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. Wash your knife and apply a thin layer of oil on your blade/knife after each use. For long term storage.

Check Stock

ColdLand |6.00" Hand Forged Damascus Steel Blank Blade for Skinner Tactical Combat Survival Camping Outdoor Bushcraft Hunting Knife Making Supplies NB09

You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care)..
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle (you don’t need to use all holes to make a knife). TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes..
DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife from a blank blade”..
We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. Wash your knife and apply a thin layer of oil on your blade/knife after each use. For long term storage.

Check Stock

Damascus Steel Tracker Knife Blank Blade 11 inches Long Hand Forged fire Pattern Tracker Knife Camping Knife with 3 Pin Hole Over 6 inches Cutting Edge 4.5 Scale Space

You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you..
Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated.....
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can....
DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife....
We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and....

Check Stock

ColdLand Knives 13.25 Inches knife blanks, Damascus Knife Blank for Kitchen, Professional Kitchen Hand Forged Knife Blanks for Knife Making, Knife Blanks Blade for Chef Knife ZB94, Gray

...rages a proper and safer "pinch grip” for better comfort and control. ColdLand knife blanks combine the best features of hidden tang knife blade blanks. Customize your very own knife handle by using wood, metal, Micarta, or even leather to create a cool accent..
☛ QUALITY CONSTRUCTION: We have made a hand forged damascus knife blank blade for you. Every Damascus Blade of hunting knife blanks is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle. TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes..
☛ ENGINEERED TO PERFECTION: Solidly built for tough use for professional chef knife. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Our chef knife 8 inch is over 260 true layers of Damascus steel knife blank. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care)..
☛ PERFECT COOKING COOKWARE GIFT: ColdLand Damascus knife blank is made for the do-it-yourself craftsman, knife scales blanks for home cooks and professional chefs alike. Our Knife blank is an exceptional combination of quality, design, materials and craftsmanship for the....

Check Stock

Handmade Damascus Steel Hunting Knife Blank Blade Fire Storm Pattern 9.5 Inches VK2181

BRAND NEW 9.5 INCHES HANDMADE DAMASCUS FULL TANG SKINNER KNIFE BLANK BLADE . FIRE STORM PATTERN DAMASCUS STEEL BLADE (1095 / 15N20) ..
OVER ALL LENGTH = 9.5 In . HANDLE LENGTH =4.5 in . BLADE LENGTH = 5.0 in , THICKNESS = 4.5 mm ..
Sharp and Hard cutting edge forged Damascus steel hunting knife.
Handmade , Forged Damascus Steel (1095 / 4340) , precise pattern , quality forge perfect balance and nice grip.

Check Stock

Handmade Damascus Steel Hunting Knife Blank Blade Fire Storm Pattern 9.0 Inches VK2184

BRAND NEW 9.5 INCHES HANDMADE DAMASCUS FULL TANG SKINNER KNIFE BLANK BLADE . FIRE STORM PATTERN DAMASCUS STEEL BLADE (1095 / 15N20) ..
OVER ALL LENGTH = 9.0 In . HANDLE LENGTH =5.0 in . BLADE LENGTH = 4.0 in , THICKNESS = 4.5 mm ..
Sharp and Hard cutting edge forged damascus steel tanto shape hunting knife.
Handmade , Forged Damascus Steel (1095 / 4340) , precise pattern , quality forge perfect balance and nice grip.

Check Stock