ReviewsDamper4800

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

  • ...ailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
  • ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
  • ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • ★ 100% Satisfactory service, if you have any questions, please feel free....
Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

  • 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
  • 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
  • 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
  • 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
  • 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....
Check Stock

Tamiya 56336 RC King Hauler Black Edition

Check Stock

Etechpower Replacement 3.8V 4800mAH T4800E Replacement Battery for Samsung Galaxy Tab Pro 8.4 inch SM-T325 T320 T321 T325 T325A SMT327A SMT320 with Tool

  • Battery Type: - Capacity: 4800mAh - Voltage: 3.7V.
  • compatible with models: for Samsung Galaxy Tab Pro 8.4" SM-T325 T320 T321 SM-T320 SM-T325 SM-T327 T325 T325A SMT327A SMT320.
Check Stock

Dundas Jafine DRB4XZW Recessed Dryer Vent Box, 4\

  • Spring loaded damper system offers complete noise control with no flapping louvers or dampers during inclement weather.
  • When the dryer, bath fan, or exhaust is turned on, the air forces the damper open allowing the air to exhaust..
  • When appliance is turned off, the damper is pulled to a secure, closed position.
  • UV resistant coating to prevent the cap from discoloring.
  • Paintable to match the exterior of your home.
Check Stock

W10240513 Washer Lid Latch Lock Strike Replace Part # P4514459 PS2579805 AP6017583 Replacement for Whirlpool Kenmore Amana Maytag Roper Sears

  • >[PREMIUM QUALITY]: Brand New & High-Quality parts (Not Genuine), but quality is the same as the OEM Standards. Design improved for more durability,....
  • >[REPLACES PART NUMBER]: Manufacture Part Number: WPW10240513. Replaces part numbers: AP4514459, 1873013, AH2579805, EA2579805, PS2579805..
  • >[COMPATIBLE BRAND]: Non-OEM Compatible with Whirlpool, Maytag, Kenmore, Amana, Crosley, Admiral, Inglis, Roper. For models: 1CWTW4740YQ0,....
  • >[FIT MODELS]: 3LWTW4800YQ1, 3LWTW4840YW0, 3LWTW4840YW1, 3LWTW5550YW0, 3LWTW5550YW2, 3NWTW4800AQ0, 3SWTW4800YQ0, 3SWTW4800YQ1, 4GATW4900YW0,....
  • >[GUARANTEE AND SERVICE]: The Washer Lid Latch Lock Replacement Part comes complete with a One-year Warranty. Save much money off dealer prices. If....
Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Backdraft Damper Galvanized Steel Inline Fan Vent with Spring-Loaded Folding Blades and 3 Pieces Duct Clamps for Ducting in Range Hoods and Bathrooms Fans 4 Inch

  • Special design: backdraft damper has a smooth-running spring and an internal foam strip to keep the blades from rattling.
  • Reliable materials: galvanized steel damper is made of quality galvanized steel, the flap leaves are made of aluminum, and the axis and spring are....
  • Easy to install: the backflow flap is installed by inserting it into the ventilation pipe until it stops.
  • Wide range of usages: these draft blocker set can be widely applied in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other....
  • Package includes: the package comes with 1 piece backdraft damper and 2 pieces duct clamps.
  • The backdraft damper is about 3.46 inches long, 3.9 inches....
Check Stock

Tbest 330mm Universal ATV Rear Shock Damper,Adjustable Rear Shock Damper Replacement for Pit Quad Dirt Bike ATV

  • 【Steel Alloy Material】Spring Shock Absorber Made of high quality steel alloy material, safe and eco‑friendly, good strength and durability.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
  • 【Standard Specification】Dirt Bike Rear Shock Damper Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications.Built to meet standard specification, strictly follow factory quality control..
  • 【Feature】Rear Shock Damper Suspension provides a smoother ride and betteall dam management.330mm Shock Damper with spring adjustment, suitable for quads, some pit bikes, buggies, etc..
  • 【Easy to Install】Motorcycle Shock Absorber Easy to install and remove, does not require complicated operations, save time and effort.Practical and convenient in use.Such a practical tool you will need it..
  • 【Fit for】Rear Shock Damper Fit for most of the Chinese brands ATVs and Go Karts , such as for TaoTao, Replacement for Buyang, Replacement for Coolsport, Replacement for Lifan, Replacement for Tank, Replacement for SUNL, Replacement for Redcat, Replacement for Eagle, etc..
Check Stock

Weber Bar-B-Kettle Charcoal Performer Touch-N-Go Replacement Gas Grill Damper Kit 63070

  • Weber 63070 Charcoal Kettle Grill Lid Damper Kit.
  • Fits 14" Smokey Joe, 18" and 22" One Touch Gold/Silver/Platinum, and 22" Master Touch models.
  • Features 4 air vent holes and a rubber comfort grip tab to adjust vents.
  • Includes: (1) Instruction sheet (1) 4-1/2" Diameter Lid damper with "Weber" name (1) Molded handle for lid damper, black (1) 1/4''-20 x .625 Slotted....
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock