ReviewsDash Umbrella Mount

Bulletpoint Metal Dash Mount Phone Holder Compatible with 2015-2020 Ford F150 & 2017+ F250/F350 Super Duty - Dual 20mm Ball Dash F150 Phone Mount (13th Generation)

[VEHICLE SPECIFIC FITMENT] Designed specifically for the 2015-2020 F-150 and 2017-2022 F-250/F-350/F-450, this F150 phone mount is perfectly positioned in the center of the dash..
[SECURELY MOUNT YOUR PHONE] Our F150 dash mount features an all-metal base and is designed to securely hold your phone even over the roughest terrain..
[STURDY + EASY INSTALLATION] our F150 phone holder installs into the top dash area. Requires removal and drilling the dash panel (4 holes). Includes all necessary hardware for an easy installation..
[ROCK SOLID SYSTEM] After tightening it down and securing your device, our F-150 Truck Center Dash Mount is not going anywhere, even on really bumpy trails or off-roading. It’s built to handle the toughest terrain so explore with confidence..
[LIMITED LIFETIME WARRANTY] Enjoy peace of mind knowing you're covered against manufacturer defects, as well as a 30-Day Money-Back Guarantee. If our F-150 Truck Phone Holder should ever cease to perform as promised under normal use, we will cheerfully replace it. *Patent Pending*.

Check Stock

Vantrue N2 Pro N2 T2 R3 X3 Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module for Windows and Mac

Vantrue N2 Pro / N2 / T2 / R3 / X3 Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module(for Windows and Mac).
With this gps mount, you can check vehicle location/speed/route on Map through Vantrue Player Software.
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your....
Package included: 1 windshield adhesive gps mount, 1 Sticky Adhesive Tape, 2 Weeks free shipping..

Check Stock

Vantrue N1 Pro X4 X1 X1 Pro X2 R2 Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module for Windows and Mac

Vantrue N1 Pro / X4 / X1 / X1 Pro Dash Cam Mini USB Port Adhesive Dash Cam Windshield Mount with GPS Receiver Module(for Windows and Mac).
With this gps mount, you can check vehicle location/speed/route on Map through Vantrue Player Software..
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your....
Package included: 1 windshield adhesive gps mount, 1 Sticky Adhesive Tape.

Check Stock

Dash Cam Mirror Mount Kit for Rexing V1,Falcon F170,Z-Edge,Old Shark,YI,Kdlinks X1,VANTRUE and Most Dash Camera and Car Camera

Buy one dash cam, buy one dash cam mirror mount. MUST HAVE for dash cam!.
New 7 different joints kit suitable for most car dash cam on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1,....
Mount your dash cam behind car rearview mirror, provides better drivers' view. Real 360 degree rotation design, adjust to any angle you want..
Exclusive 9.70mm ultra-slim design SnakeMount, suitable for most car rear view mirror.100 percent sturdy dash cam mirror mounting solution..
Heat-resistant. Never fall off the windshield. Never..

Check Stock

Vantrue Dash Cam Rearview Mirror Mount for N2 Pro N2S T3 N2 X4 X3 T2 T1 X1 X1 Pro Dash Cams Rexing V1 V1P Dash Cams Yi 89006 Dash Cam

Comes with 4 different joints, works well with Vantrue N2 Pro, N2S, T3, N2, X4, X3, T2, T1, X1, X1 Pro dash cams, Rexing V1, V1P dash cams, Yi 89006....
This rear view mirror mount allows you to mount the dash cam behind car rear view mirror without blacking your drivers’ view, prevents your dash cam....
Full 360° rotation and ball-in-socket design allow you to adjust and position your dash cam as you please, providing the perfect viewing angle..
The soft padding ensures a firm mount and avoids damaging the surface to your rear view mirror pole..
Easy to install and remove. Fits most vehicles which have a rear view mirror pole at least 0.4”. Please check pictures before purchase..

Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous....

Check Stock

Thinkware U1000 Dash Cam Mount

【ELIMINATES VIBRATION】3M tape adhesive mount eliminates vibration and windshield glare.
【EASY DASH CAM REMOVAL】Equipped with a slide-and-snap feature for easy dash cam removal.
【DISCREET】Compact design to minimize viewing obstruction.
【FUNCTIONALITY】Mount stays secure during extreme weather or violent impacts.

Check Stock

Wheelchair Umbrella Holder, Foldable Stainless Steel Umbrella Mount Stand for Bikes Strollers - Not Included Umbrella

Universal Design: This wheelchair umbrella holder is suitable for most manual wheelchairs and can be used for shade, sun and rain protection..
Easy To Install: Wheelchair umbrella mount holder is easy to install, can be firmly clamped, simple and practical wheelchair accessory..
Premium Material: Stainless steel umbrella mount stand, environmentally friendly, safe, odorless, with high hardness, more durable..
Multi Application: This umbrella clamp is not only suitable for wheelchairs, but also for bikes, strollers, etc, to meet your different needs..
Foldable: Umbrella clamp stand can be folded, does not take up space, easy to store, also convenient to adjust the different angles of use..

Check Stock

Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74') 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack

Broad Compatibility: Adhesive mounting disk 95mm fits any suction cup, work with various dashboard surfaces,windshields or windows, to solve the problem of suckers falling off. It provides a 3.74" circular glass-like flat surface for securing dash suction cup phone cradle, windshield cell phone holder, gps navigation ,receiver, car tablet stand, outdoor camera car mount,car decorations, wireless charger , shower wand suction cup holder,phone magnetic mounting system,grab bars,radar detector,ect..
3M VHB Self-Adhesive: These PVC plastic silicone plate with extra strong adhesive gel can hold up to high temperature(120°C). The stickiness of the powerful sticking discs is 40% higher than ordinary two sides sticky glue. The dash mount adapter plate with double-stick tape for car dash is heat proof and waterproof. No matter in hot summer or cold winter, you can use it without worry. Auto smartphone mounts glue pad suction pump base is firmly fixed in flat dash, windscreen and more..
Easy to Use: The smooth heavy duty dash mounting pad comes with alcohol wipes. Using it to clean the selected dashboard surface before installing, after the surface is fully dry, peel off red adhesive film from the dash suction cup mount plate and attach the vacuum sucti....

Check Stock

Mount Zion Marathon CD (Patch the Pirate)

PHONE MOUNT FOR VERSATILE USE: 3-In-1 universal car phone mount kit that can be used in your vehicle’s CD Slot, dash or vent. Use the CD slot adjustable swing-arm to move your device away from the vehicles vent, stereo or gear shifter..
MAGNETIC MOUNT: This magnetic phone mount includes 30% stronger Rare-Earth neodymium magnets that keep a secure grip to your devices. The magnet will not damage your smartphone, but will keep it firmly in place while driving..
OPTIMAL VIEWING: With 4-axis, 360-degree adjustable head and kickstand, this vent mount allows for perfect viewing from any angle. Adjust for your needs or so your passengers can see your display..
FUNCTIONAL DESIGN: This mount is designed to attach to your vehicle one of three ways without any obstruction. That means you can simultaneously mount your cell phone and access all of the controls around the mount..
INCLUDED IN PACKAGE: Included in this package is one MagicMount pro head, a CD slot mount with adjustable arm, a Vent mount, one Dash mount, two MagicPlates, a Protective film sticker, an alcohol cleaning Wipe and a User Manual. This product is backed by a lifetime limited warranty..

Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..

Check Stock