ReviewsData Acquisition Module

YXMY2020 Benchtop Digital Resistance Tester AT527 AC Low ohm Meter Battery Internal Resistance Meter for Testing Various Electronic Components

  • This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
  • The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
  • The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
  • The export function can be effectively applied to remote control and data acquisition and analysis..
Check Stock

Directed Electronics GMDLBP GM Door Lock, Alarm, Transponder and Passlock Interface Module for J1850 Type Models

  • Data buss doorlock alarm and gm(r) passkey/passlock.
  • Lock/unlock, driver's priority unlock, trunk/hatch, oem security arm/disarm, door trigger output and override.
  • Gen2 and 3 Gm(R) passkey3 transponder immobilizer & passlock 2 immobilizer via data bus.
Check Stock

DIYmall 6M GPS Module with EEPROM for MWC/AeroQuad with Antenna for Arduino Flight Control Aircraft

  • When you test the GPS module, pls kindly note that you need test it in outdoor wide plain place, not indoor..
  • The 6M GPS module with ceramic destined antenna, super signal,can be quickly positioned..
  • The 6M GPS module uses serial comms to the host. It is setup to use 9600baud by default..
  • LED signal indicator,With data backup battery..
  • EEPROM power down to save the configuration parameters data..
Check Stock

HC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module

  • RXD: the receiver, Bluetooth module receives from another device sent data.
  • normally connected to other devices transmitting end TXD?.
  • TXD: sending end, the Bluetooth module to send data to other devices.
  • receiving terminal is normally connected to other devices RXD.
Check Stock

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

  • BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
Check Stock

Boost Buck Converter, DC 6-55V to 0-50.00V Wireless Digital Adjustable Programmable Step-Down Communication Version Buck Power Supply Module LCD Constant Voltage Buck Converter(DPS5005)

  • The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one..
  • This module has power-down stored function and can store 10 groups preset value..
  • Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required..
  • LCD display on the module has the function digital voltmeter and ammeter..
  • On the setting data interface, you can adjust over-voltage value, over-current value, over-power value, data set and LCD brightness.This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied..
Check Stock

Crimestopper RS4-G5 1-Way Remote Start and Keyless Entry System with Trunk Pop

  • 1-Way Keyless Entry & Remote Start System with brushed metal and two 5-Button Transmitters.
  • Brushed metal 5-button sidekick remote control transmitter.
  • 2000 ft. operating range / 31 programmable options.
  • 2-Way data port for easy data module hook-up.
  • Mobile Start port for easy connection to Mobile Start MS-3 module.
Check Stock

Auto Meter 3379 Sport-Comp Wide Band Air Fuel Ratio Kit,2.3125 in.

  • Gauge kit includes custom tuned .1 AFR Resolution Bosch LSU4.2 Sensor, 8ft. wiring harness, 304 stainless steel weld-in bung, mounting hardware, and detailed instructions for installation.
  • 0-4v data output feed for ECU, data acquisition unit, or Laptop tuning.
  • Suitable for use with gasoline powered engines.
  • Digital segment display and LED radial bar graph display.
  • 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system.
Check Stock

Auto Meter 4379 Ultra-Lite Wide Band Air Fuel Ratio Kit,2.3125 in.

  • Gauge kit includes custom tuned .1 AFR Resolution Bosch LSU4.2 Sensor, 8ft. wiring harness, 304 stainless steel weld-in bung, mounting hardware, and detailed instructions for installation.
  • 0-4v data output feed for ECU, data acquisition unit, or Laptop tuning.
  • Suitable for use with gasoline powered engines.
  • Digital segment display and LED radial bar graph display.
  • 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system.
Check Stock

HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock