ReviewsDbw Voltage Stabilizer

5000W Peak 15000watts Pure Sine Wave Power Inverter 48V DC to 120/240 VAC Split Phase with Battery AC Charger,Off Grid Low Frequency Solar Inverter

  • 120/240 VAC Split Phase,Continuous 5000 Watt support Lithium, Sealed,AGM, Gel,and Flooded Batteries,5msec typical transfer time.
  • Adjustable charge current off-0%-100%, Five Stage Smart Charger, 35A battery AC charger max For lifep04，Sealed Gel AGM Flooded Lithium, Sealed, Gel, and Flooded Batteries.
  • High-definition LCD display,full-vision real-time monitoring data,Remote panel available.
  • AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input..
  • charging current and charging voltage can be adjusted.
  • customizable voltage for low voltage protection and voltage for low voltage recovery..
  • High transfer efficiency is above 90%, , complete isolate surge interference of input & output's voltage and current, Impact resistance, super load capacity, built-in AVR stabilizer, continuous stable pure sine wave output..
Check Stock

Hoshizaki TS005 Thermistor w/ Seal

  • The NTC thermistors are reliable and stable, with wide range of over-current control..
  • With small size and large power, they have strong capacity to inhibit surge current..
  • Large material constant, large B value, with small residual resistance..
  • Thermal shock resistance, with wide range of operating temperature..
  • Used for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

Superpunch Cutaway Stabilizer For Embroidery Machines - 12' x 10 yards roll, White SuperStable Machine Embroidery Stabilizer Backing, 2.0 Oz Cut Away Embroidery Stabilizers

  • High-Quality Cut Away Stabilizer: Do you need a quality embroidery backing stabilizer? Look no further. Our cutaway stabilizer embroidery White 2.0 oz 12" x 10 yards roll is perfect. This embroidery stabilizer is designed to cut away excess stabilizer from fabric and then trimmed close to stitches, its wet laid non-woven backing gives you a clean cut-away. 2.0 oz weight helps retain your design's shape even after repeated washing..
  • Machine Embroidery Stabilizer Backing: Embroidery stabilizer backing is an essential tool for your machine embroidery projects. From thread stretching to applique and decorative stitch sewing, fabric stabilizer provides backup support that prevents fabric puckering and shifting. So, if you’re looking for a professional-looking finish to your designs, an embroidery stabilizer is just what you need!.
  • Easy To Use: The convenience of using superstable embroidery stabilizer is undeniable. The lubricants contained within each role make needle gliding easy, allowing for a smooth and efficient experience. Not only do these cut-away stabilizer roll make the embroidery process more enjoyable, but it also saves valuable time. Whether working on projects for yourself or a customer, this easy-to-use embroidery stabilizer cutaway stabil....
Check Stock

DEVMO 600W Constant Current Boost Converter DC to DC 10V-60V to 12-60V Output Step-up Transformer Module Power Supply Driver Max 10A

  • Input DC10V-60V step-up to DC 12-60V output.
  • Output power= input voltage * 10A. e.g.12V * 10A = 120W 24V * 10A = 240W 60V * 10A = 600W.
  • Output current: 10A is max. 6A or more please strengthen the heat dissipation (The larger the difference between the input and output pressure the smaller the output current).
  • Note: please don't use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.
  • Suitable for DIY voltage stabilizing power supply, vehicle power supply, high power mobile power supply, solar panel voltage stabilizer, battery/lithium battery charging, driving high power LED and so on.
Check Stock

Ametherm Ntc Thermistor - SL22 1R020

  • The NTC thermistors are reliable and stable, with wide range of over-current control..
  • With small size and large power, they have strong capacity to inhibit surge current..
  • Large material constant, large B value, with small residual resistance..
  • Thermal shock resistance, with wide range of operating temperature..
  • Used for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

Gimbal Stabilizer with Selfie Stick for iPhone: Portable Handheld Gimble with Tripod & Remote for Cell Phone Camera & Samsung Android Smartphone Recording Video & Vlogging on Tiktok & YouTube

  • Multifunctional Phone Stabilizer - This gimbal stabilizer consists of a phone stabilizer, a phone tripod, and a selfie stick.
  • If you like taking family vlogs, selfies, and tik tok videos, this phone gimbal stabilizer will help you recording short videos and photos more easily and conveniently.
  • Bringing this stabilizer to travel means you won't have to bring an extra tripod stand, and a selfie stick anymore.
  • Stabilizer for Phone taking Videos - The stabilizer is sensitive and accurate.
  • When you use the phone stabilizer to take videos, it will effectively help you reduce the effect of shaking, especially when you're recording videos while walking, or moving the phone camera.
  • Use this gimbal stabilizer, you can also get the professional video effect like other YouTubers and Vloggers by only using your iPhone.
  • Selfie Stick Function - This handheld gimbal stabilizer can also be used as a selfie stick.
  • The body of the selfie stick is made of new metal material, it's more durable and sturdy but weighs very light.
  • There's an angle-fixed lock at the back of the stabilizer, it can fix the angle of the phone mount, so you can turn the stabilizer to a selfie stick easily and use it as a general selfie stick.
  • Phone Tripod Stand with Stabilizer - There's a tripod fol....
Check Stock

Voltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink

  • Realtime LED Display & Indicators --- The transformer board is designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
  • Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
  • Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
  • Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
  • 2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
  • 3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltag....
Check Stock

OPTI-UPS AVR SS2000 Home AVR Series 6-Outlet Automatic Voltage Regulator – Black 2000 VA / 1000 W

  • Protect Equipments from: Brown out, Surges, Spikes.
  • Voltage Stabilizer monitors all incoming electricity and cleans out the damaging current..
  • Buck & Boost LED display, Telephone/Fax protection, Overload/Output Short Protection.
Check Stock

DC-DC Stabilizer DROK 9V-36V to 12V Boost Buck Converter 5A 60W Waterproof Auto Step Up Down Voltage Regulator 12V Volt Transformer for Car Audio Solar Power System LCD Television LED Display Screen

  • PARAMETER --- DROK DC-DC converter input voltage range is DC 9~36V (12V).
  • APPLICATION --- the 12v buck boost converter module can be used in integrated wiring for monitoring fire alarming system.
  • PROTECTION --- this voltage stabilizer comes with over-current protection, over-temperature protection.
  • adopts potting technology, characterized by....
  • FEATURE --- the step down power module adopts high-integrated chip, stable and reliable.
  • synchronous rectification technology, with conversion....
  • NOTE --- Leave a margin for the power supply to ensure it can long-term stably working..
Check Stock

Simthread Fusible No Show Mesh Cut Away Stabilizer Backing Interlining for Embroidery and Sewing - Weight 1.9 Ounces 12' x 10 Yards/Roll

  • ★ Simthread Fusible No Show Mesh Cut Away Stabilizer - Thanks to its semitransparent and soft texture, no show mesh stabilizer sheet is a good choice for light-colored and soft woven fabric.
  • ★ Fusible Embroidery Stabilizer Specification - 12" x 10 Yard, come in a roll-type packaging which makes it easy for you to cut sheets depending on your requirements..
  • ★ 100% Nylon Material - The invisible embroidery stabilizer backing is made of strong nylon spun polymesh material that provides permanent stable backing for embroidery projects, and helps the stabilizer withstand repeated washing and wearing..
  • ★ Safe and Soft on Skin - The stabilizer sheet is acid-free and lead-free.
  • the soft spun polymesh material protects your skin from rubbing on the rough thread parts at the back of an embroidery design. No more irritable and uncomfortable feeling when wearing embroidered shirt!.
  • ★ How to Use - Simply iron on the stabilizer to the fabric, cut the invisible embroidery stabilizer into a size as you want, hoop it together with the fabric, then stitch.
  • cut away and clean the stabilizer around the stitches after finishing your project. And also, it can be used to embroider patches by hooping only two cross layers of the stabilizer together with no fabric..
Check Stock

Ladder Stabilizer for Roof Gutter Roof Ladder Accessories Wing Span Wall Ladder Standoff, Wheel Heavy Duty Steel Ladder Roof Hook

  • Why choose our ladder stabilizer? - Do you need a ladder stabilizer? As we all know, the Ladder Stabilizer is mounted on an extension ladder and is essential for working around windows, eaves, and high walls when painting, taping siding, or performing any exterior repair work. Our ladder stabilizer for roof is a great accessory designed to fit homeowners and professionals alike..
  • What does a ladder stabilizer do? - Does a ladder standoff work? Ladder stabilizers are designed to distribute weight more evenly over a larger area, giving more stability and preventing any possibility of slipping while climbing up and down. Ladder stabilizers are also commonly used when working with ladder roof stabilizers, such as when installing asphalt shingles, to enhance the ladder's stability even more and to provide you with the strength you need to complete the job safely..
  • Best ladder stabilizer for gutters - Very easy-to-apply ladder stabilizer. Applying the ladder roof stabilizer can minimize the left and right sliding, but also ensure our safety. This ladder stabilizer can help you to support your ladder around the rain gutter. This ladder stabilizer for roof is made of h....
Check Stock