ReviewsDc Input Compact 2

PERFEIDY 9V 1A 0.8A 0.5A Charger 9.0V 1.0A AC Adapter 9W Switching Power Supply DC 9V 1000mA 800mA 600mA 500mA 300mA Adaptor Regulated Transformer Cord with 10 Interchangeable Jacks Plug UL Listed

  • UL LISTED 9V 1A 0.8A 0.6A 0.5A AC to DC Charger, Energy Efficiency VI, Regulated 9.0V Power Cord Tested & Approved and Certified by UL, Replacement Power adapter build in short circuit/Over current/Over voltage/Over temperature protection, Safe charging for your DC 9V 1A max input devices.
  • 9V 1A 0.8A 0.5A Switching Power Supply, DC 9W Max, Power supply works for the devices which ask for a less than 9V 1A 9W power adaptor, Such as 9V 1000mA, 950mA, 900mA, 850mA, 800mA, 750mA, 700mA, 650mA, 600mA, 550mA, 500mA, 450mA, 400mA, 350mA, 300mA, 250mA, 200mA, 150mA, 100mA, 9V 1A, 0.9A, 0.8A, 0.7A, 0.6A, 0.5A, 0.4A, 0.3A, 0.2A, 0.1A transformer charger.
  • DC Polarity: Inner Positive(+), Outter Negative(-), Input AC 100-240V 50/60Hz, Worldwide input voltage range, US standand wall plug, 6.0FT extra long enough power cord, Charger can be work for most of your 9V DC input devices.
  • Interchangeable Multi Jacks - Selected 10pcs various connectors which can be used for most of your 9V 1.0A DC devices, DC Jack Dimensions: 6.3*3.0, 5.5*2.1, 5.5*2.5, 4.8*1.7, 4.0*1.7, 3.5*1.35, 3.0*1.1, 2.5*0.7, 6.0*4.4 with pin inside, 5.0*1.0 with pin inside, DIY connector, ⚠️Please DOUBLE CONFIRM the DC jack dimensions to ensure the compatibility.
  • What You Get: 1 x 9V 1A max class 2 u....
Check Stock

KFD DC Adapter for Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines 24V 3.75A 90W 12-24V Car Charger Power Supply Cord 3 Pin

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Connector Size:3 Pin. Total Cable Length 2.6M.
  • Compatible with Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines.
Check Stock

Bluetooth 5.0 Stereo Audio Amplifier Receiver – 300W HiFi Dual Channel Sound Receiver w/USB,SD Card,FM Radio,2 Microphone Input,Remote Control Mini Hi-Fi Karaoke Integrated Amp

  • 600 WATT POWER FOR HOME AUDIO: THE 2 channel Bluetooth 5.0 stereo amplifier receiver provides 600W/300W x 2 P.M.P.O(Peak Music Power Output), which is....
  • 6 INPUTS Optional with 2 Mics IN: The digital amp box supports USB/SD card/FM Radio/ Bluetooth 5.0/4 inches microphone IN and various external sources....
  • USB 2.0/SD CARD INPUT: The sound amplifying mixer device features a USB/SD card input to support flash drives or SD card. Allows you to play your....
  • EQ CORTROLS - Previous, next, play/pause. Rotary knob controls for input, bass, treble, and master volume, come with remote control for distant audio....
  • DC 12V and AC110V POWER INPUT: Recommend for home TV audio, computer audio system-game, tower Speaker, garden speaker. Small simple compact design....
Check Stock

Podoy GS-100A Flash Strobe Controller Flasher Module for LED Brake Tail Stop Light 12V-24V

  • Rated power:10W to 15W,Type: Flash Strobe Controller Material: Plastic Quantity: 2pcs Item Color: Black Input: DC6V-30V Output: DC6V-30V Item Size: 5*2.7*1.3cm / 2*1.1*0.5 in (L*W*H).
  • Features: When braking first fast-blinking 4 times and then slow-blinking 4 times, finally stay in the original steady light, which warms the drivers behind you when you stop with blinking light. Alert the vehicles behind you to stop to prevent rear-end accident when driving blocked road. Wide voltage 6-30V, suitable for all types of cars' brake lights with 6V~30V, it also fits for trucks, motorcycles, electric bicycles, tanks and other LED lights..
  • Input: red wire for positive, black wire for negative.
  • Output: red wire for positive, black wire for negative. Made of eco-friendly and durable material. Double side tape is included for easier install. Complete sealed technology make it waterproof, short circuit protection. Mini and compact design, easy to install and space-saving..
  • Cable length:Approx. 15cm,Package includes: 1pc GS-100A.
Check Stock

Ubiquiti UniFi AP AC PRO 3-Pack - UAP-AC-PRO-3 US

  • ▶Dual Model--The rc battery charger has AC/DC dual input model. This dual lipo battery charger is upgrade version of C150, twin-channel 2 in 1....
  • ▶Support Batteries--The rc charger supports charging, discharging and balance charging batteries: 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V....
  • ▶Multi-extra Functions--Our lipo battery charger has multi-extra functions: 1.Battery meter- display lithium battery cell counts, total voltage,....
  • ▶Terminal Voltage Control--This dual lipo charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact, beautiful. The....
  • ▶Max Safety--Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature....
Check Stock

KFD DC Adapter Car Charger 12V-24V for Phillips Respironics PR System One REMstar Auto A-Flex DOM 460P REF 560P 567P 60 Series CPAP BiPAP ASV IP22 1091399 1118499 Delta MDS-080AAS12 12V 8.33A 100W

  • ...If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠️❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input:DC 12V-24V (9-32V DC Max) Output:12V 8.33A 100W(6.67A 80W/5A 60W/4.16A 50W Compatible), Total Cable Length 2.6M.
  • Compatible with Philips Respironics Remstar Pro M Series 1015642 CPAP Machine 50 Series System One REMstar Auto A-Flex AFlex 550 Resp550 REF 550P Pro M400 M501 M511 M701 1051158 1024563 AA24750L 001 REF 1058190 MW115RA1200N05.
  • Philips Respironics DreamStation Machines 267P 467P 560 560P 567P 660P 667P 760 760P 767P.
  • Compatible With Philips Respironics PR System One 60 Series CPAP APAP BI....
Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Thomson Bicycle Stem Top Cap Black

  • This 12v 2a power adapter comes with 11 connectors in order to meet your more requirements. Max. ouput current is 2.0 amp it means that it can supply....
  • The 12v 2a power supply fits for many 12V household electronics like DVD player LED LCD screen which DC input rating current is less than 2000mA. such....
  • Input: AC 100-240V 50/60Hz, Output: DC 12 volt 2.0 amp (2000mA), Power: 24 Watt. US plug, Polarity: Center Positive (+). Power Cord Length: 5 Feet/....
  • Selected 11pcs various popular connectors which can be used for most of your 12V DC devices, DC Jack Dimensions: 6.3*3.0mm, 6.0*4.4mm, 5.0*1.0mm,....
  • What You Get: 12V 2A AC DC power adapter, 11 x Multi DC jacks, 30 days money back, 12 months exchange with free..
Check Stock

DC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-200V DC Output 0-5V DC

  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-1000V DC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
  • Power Supply:11-30V DC(any stable power,e.g. 15V dc).
  • Working Stability: annual change 003c 0.2%.
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting.
  • Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Check Stock

DC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-100V DC Output 0-5V DC

  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-1000V DC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
  • Power Supply:11-30V DC(any stable power,e.g. 15V dc).
  • Working Stability: annual change 003c 0.2%.
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting.
  • Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Check Stock

DROK® DC-DC Buck Converter 3.5-30V to 0.8-29V 10A Step-down Volt Adjustable Output Voltage Regulator Module Power Supply with High Accuracy Voltmeter Red Digital Tube Display

  • DROK DC buck converter input voltage range is DC 3.5~30V, output adjustable voltage range is DC 0.8~29V, max output current is 10A, conversion rate....
  • LED Voltage Meter: the step down regulator is equipped with high accuracy voltmeter, red LED display, press the key to switch display input voltage or....
  • Metal Case: DROK volt transformer is designed with metal case, can protect the module from destroying, and the case itself is a heat sink, excellent....
  • Note: please make sure that the input voltage is higher than the output voltage at least 1V.
  • please note that this module doesn't have reversed....
  • Small Size: the switching power supply module is with compact design, dimension is 85mm*58mm*33mm(L*W*H)..
Check Stock