ReviewsDc Motor Driver

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch & Knob

  • Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W..
  • Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
  • Speed Control: our motor control board can regulate motor speed by potentiometer.
  • what's more, it support clockwise/anticlock-wise rotation adjustment..
  • Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative.
  • thick blue wire for the motor positive, and the thick green for the motor negative..
  • PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient..
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ...ard TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..
Check Stock

Manual for Fish farming Business: Generates income from fish Aquaculture

  • ...inflatable. Use is very convenient. Quality and workmanship are very superb, in line with international standards. Without oil lubrication, it is clean compressed air..
  • ★MULTI-FUNCTION - The product is using energy-saving, high efficiency permanent magnet DC motor as the driver, with aluminium alloy shell by die-casting machine, compact structure, small size, light weight and easy to carry, making it the ideal tool for your athletic balls or aquarium(12 volt). OUTPUT: 105LPM /Min POWER: 100W VOLTAGE: DC 12V.
  • ★METAL PORTABLE AQUACULTURE AIR PUMP - Internal parts and cables are 100% copper, direct-drive motor makes the drive low rotating speed, high efficiency, compact, quiet and stability, and easy to control..
  • ★EASY TO INSTALL - Easy setup and operation, safe and stable.
  • Intelligent, energy saving, environmental protection. Be suitable for living fishes in vehicles, restaurants and industry. Hydroponics, Aquariums, Fish Farms and Hydroponic Systems, Dusting, Inflation, Manufacture. It's also used for air supply to spare parts of food machine, medical instrument, belching lamp and new type paint, making and designing a....
Check Stock

sb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board

  • micro:bit edge connector, directly pluggable.
  • 2x DC motor interfaces, 3x servo interfaces.
  • Integrates 5V regulator, up to 3A output current.
  • Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check Stock

Monitor Chlorine Test KIT (250 Tests) - Monitor Aquarium and aquaculture Water Quality

  • ...inflatable. Use is very convenient. Quality and workmanship are very superb, in line with international standards. Without oil lubrication, it is clean compressed air..
  • ★MULTI-FUNCTION - The product is using energy-saving, high efficiency permanent magnet DC motor as the driver, with aluminium alloy shell by die-casting machine, compact structure, small size, light weight and easy to carry, making it the ideal tool for your athletic balls or aquarium(12 volt). OUTPUT: 105LPM /Min POWER: 100W VOLTAGE: DC 12V.
  • ★METAL PORTABLE AQUACULTURE AIR PUMP - Internal parts and cables are 100% copper, direct-drive motor makes the drive low rotating speed, high efficiency, compact, quiet and stability, and easy to control..
  • ★EASY TO INSTALL - Easy setup and operation, safe and stable.
  • Intelligent, energy saving, environmental protection. Be suitable for living fishes in vehicles, restaurants and industry. Hydroponics, Aquariums, Fish Farms and Hydroponic Systems, Dusting, Inflation, Manufacture. It's also used for air supply to spare parts of food machine, medical instrument, belching lamp and new type paint, making and designing a....
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor(1 pcs

  • Package included: 1 x Stepper Motor Driver..
  • ✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • ✿The largest 32 subdivision of the 6 models are optional.
  • Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
  • ✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
  • ✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

HiLetgo 5pcs L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor

  • HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board.
Check Stock