ReviewsDc Motor Speed Control

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....

Check Stock

10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps

PWM Duty Cycle:0%-100% and Quiescent current is 0.04A( not over 40mA when voltage is DC10V to DC30V).
Operating temperature:-20 to 40.It can perform normally when the temperature is below 0.
Universal speed controller can be used for DC brush motor, suitable for car cooling fan motor, car air conditioning motor, exhaust blower, treadmill motor, etc.
This motor speed controller can also be used for dimming DC lamps or controlling DC heater.

Check Stock

High Torque Permanent Magnet DC 12V High Speed 12000 RPM Brush Small DC Motor

Efficient DC Motor: The electric motor with 100% copper core has low noise and excellent speed regulating performance. The small-sized permanent magnet DC motor with an output power of 3/4 HP is compact and energy-saving. Dynamic balanced armature for smooth operation..
Steel Housing: The shell of the permanent magnet DC generator is made of steel. The reliable metal material and high-quality oriented magnets can well guard the internal circuit from thermal overload. Smooth appearance is convenient to clean and use..
High Speed Cooling Fan: Big fan at one end cools the high-speed DC motor in hours' running even in dusty or damp environments. It is able to reduce energy costs or overheads, reduce the running temperature, and increase winding lifetimes..
Detachable Base: High torque DC motor with 56C frame and a removable mounting base provide dual mounting versatility for easy mounting. The carbon brush is a consumable part, and the package includes one pair of spare carbon brushes that can be replaced in time..
Multiple Application: DC motors have a wide range of applications. Our permanent magnet motor-generator is generally used in wire peeler, baler, paper cutter, and other mechanical equipment and automated control systems..

Check Stock

Matthews EKH-BN-BN Eliza 56\ Outdoor/Indoor Damp Locations Hugger Ceiling Fan with Remote Control & Wall Control, 3 Blades, Brushed Nickel

ELIZA CEILING FAN DIMENSIONS: Diameter 56".
Height 10" (From Ceiling to Bottom of Fan).
FAN BLADES: 3 Brushed Nickel Finish Polycarbonate Blades (56" Span/27° Blade Pitch).
DC Motor CFM: 4,067 (High Speed), 2,669 (Average).
FAN CONTROL: Includes Hand-Held, Wall-Mountable, 6 Speed Fan Remote Control with Reverse Function (Part Number: RC-DC-CEILING ) and Decora-Style Wall Control (Part Number: DC-WC ).
INSTALLATION: Suitable for Ceiling Heights 7’10” or Greater.
Not Recommended For Vaulted Ceiling Mount.
ETL and CETL Approved for DAMP Locations.
DETAILS: Constructed of Cast Aluminum and Stamped Steel with Brushed Nickel Finish.
Energy efficient, Ultra-Quiet, 6 Speed and Reversible DC Motor that Provides High Torque At A Low Speed, Meaning Greater Airflow And Less Energy Consumption.

Check Stock

DEWALT Angle Grinder, Medium, 5-Inch, 5-Amp (DW831), Yellow

12 amp AC/DC and 11,000 rpm motor of angle grinder provides high speed for fast material removal.
High power-to-weight ratio of the metal grinder is designed for greater efficiency and reduced user fatigue.
DEWALT angle grinder comes with adjustable guard that can be adjusted to redirect sparks away from user.
Rear handle design of the hand grinder is made for greater comfort and control.
Sealed ball and roller bearings for extended motor life.
12.0 Amp AC/DC, 10,000 rpm motor provides high speed for fast material removal.
High power-to-weight ratio for greater efficiency and reduced user fatigue.
Keyless adjustable guard provides tool-free guard adjustments, increasing productivity.
Rear handle design for greater comfort and control.
External brush caps for easy servicing sealed ball and roller bearings for extended motor life.

Check Stock

DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch & Knob

Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W..
Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Speed Control: our motor control board can regulate motor speed by potentiometer.
what's more, it support clockwise/anticlock-wise rotation adjustment..
Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative.
thick blue wire for the motor positive, and the thick green for the motor negative..
PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient..

Check Stock

DC Motor Speed Controller Universal DC 12V 24V 10A Electronic Stepless Speed Regulator Switch for Car Truck Fan Heater Control

【Universal】Voltage 12V or 24V. Overload current: 10A. Supports high power, 12V/120W, 24V/240W.
【Features】Easy to adjust and control speed of DC motor, simple wiring and convenient to use, a great replacement for broken one. Extra long knob screw to meet installation needs.
【Wiring】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.
【Heat dissipation】This electronic stepless speed controller is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation.
【Application】Widely used for 12-24V DC electric appliances. Adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc.

Check Stock

Matthews IR3HLK-TB-BW-42 Irene 42\ Outdoor Hugger Ceiling Fan with LED Light and Remote & Wall Control, 3 Wood Blades, Textured Bronze

IRENE CEILING FAN WITH LIGHT: 16 Watt Integrated LED Light, Replaceable and Dimmable (3075K, 690 Lumens, 90CRI, 60000 Bulb Life Hours).
Height 12" (From Ceiling to Bottom of Light).
FAN BLADES: 3 Outdoor Approved Barn Wood Tone Finish Solid Wood Blades (42" Span/15° Blade Pitch).
FAN CONTROL: Includes Hand-Held, Wall-Mountable 6 Speed Fan Remote Control with Light Dimming and Reverse Function (Part Number: RC-DC-CEILING) and Decora-Style Wall Control (Part Number: DC-WC).
INSTALLATION: Suitable for Ceiling Heights 7’10” or Greater, ETL and CETL Approved for DAMP Locations.
DETAILS: Constructed of Cast Aluminum, Heavy Stamped Steel with Textured Bronze Finish.
Energy Efficient, Ultra-Quiet, 6 Speed and Reversible DC Motor that Provides High Torque At a Low Speed, Meaning Greater Airflow And Less Energy Consumption.

Check Stock

2Pcs AC 110V 120V 220V 230V 10000W Motor Speed Controller Electronic Voltage Regulator 10000W High Power SCR Dimming Attemperation Thermoregulation Board…

【High quality】Easy to adjust and control speed of DC motor, simple wiring and convenient to use, a great replacement for broken one.
【Product size】length 86.8mm/3.42in,wide 32mm/1.27in,high 35mm/1.39,wire length is 120mm/4.7in.
【Material】This electronic stepless speed controller is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation.
【Application】Widely used for 12-24V DC electric appliances. Adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc.
【Way of connection】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.

Check Stock

DC Motor Controller, Yeeco DC 10-60V 12V 24V 36V 48V 60V DC Motor Speed Controller, PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Control Switch

WIDELY OPERATING RANGE:Input:DC 10-60V,max drive current is 6A,Maximum wattage is 300W,PWM pulse width adjustable range: 10%-100%.
ADJUSTABLE KNOB:DC brush motor speed driver is designed with a voltage adjustment knob, very convenient for voltage control., DC output stepless adjustable..
WIRING TERMINALS DESIGN: The wiring terminals adopts fence type design and is with safety cover, and there is wiring marks on each terminal, please follow the marks when you are wiring..
SPECIFICATION:Small Size:0.4×3.9×2.4inch, DC motor speed controller has high precision, wide speed controlling range, low power consumption and long service life.
OCCASION:Pwm dc motor speed controller widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.

Check Stock

Tnuocke 12V/24V DC Motor Speed Controller Universal,Knob Screw Electronic Stepless Speed Regulator Switch,Adjustable Motor Speed, Automobile Fan HeaterControl, Defroster, Fans Speed Regulation

【About DC motor】Voltage 12V or 24V. Overload current: 10A. Supports high power, 12V/120W, 24V/240W.
【High quality】This electronic stepless speed controller is a controller with heat sink that will ensures a better heat dissipation.Easy to adjust and control speed of DC motor,knob screw convenient to use.
【Product size】length 86.8mm/3.42in,wide 32mm/1.27in,high 35mm/1.39,wire length is 120mm/4.7in.
【Way of connection】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.
【Wide use】Widely used for adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc..

Check Stock